CUTTING UP THE BADDEST CORVETTE EVER! TWIN TURBO’S INSTALLED & A CUSTOM HOT ROD CHASSIS!

#CASEYSCUSTOMS #HOTROD #RATROD #KUSTOM #CORVETTE
Finishing up the corvette chassis and installing twin turbos!
Check out trailer trash racing here ⬇️
/ @trailertrashracing
⬇️COOLEST MERCH ON THE PLANET!⬇️
caseyscustoms.com
CHECK OUT THE 2ND CHANNEL FOR EXTRA VIDEOS! ⬇️⬇️
/ @caseyscustoms2
BECOME A CHANNEL MEMBER!⬇️⬇️
/ @caseyscustoms
ANTIGRAVITY BATTERYS!⬇️⬇️
(CC10 10% OFF!)
antigravitybat...
HIT THAT SUBSCRIBE BUTTON!
I Finally got a P.0. Box! Send me mail, stickers, merch, anything! If enough shows up I will open it on camera! Thanks!!!
Caseyscustoms
P.O. Box 819
St.Joseph MO 64502
Stay tuned for more vids!
If you like this vid please like, share and subscribe!
It means a lot and helps the channel grow!
Also check me out on Facebook, Instagram and tiktok! 👇👇👇
/ caseyscustoms
...
www.tiktok.com...

[@CaseysCustoms]

PLEASE LIKE THE VIDEO!! who thinks s10 rear ends can’t handle power?

[@felonysounds]

C-clip eliminators and a Richmond or Auburn posi and they will handle quite a bit of power. I'm in eastern Iowa and I have one from a 94 s10 ss with the factory g80 posi if you ever need another one. 2wd 5 speed blazers have the 8.5 rear axle

[@gr33ngobl1n94]

@caseyscustoms hey bro as I said on the last vette vid you asked for names, I said it should be called Frankenstiens Monster vette as its made from parts of other cars and patched together like Frankenstiens monster. 💪🏾

[@darrenbrisson4336]

Fuck even go to the junk yard buy a ford 9 inch try to find the older 1980 f-100 not f-150 has bigger bolt pattern fuck even an 8.8 out of a fox body would be better

[@daboenterprize8265]

Ford explorer 8.8 would have been a better choice!! Looks awesome can wait🎉🎉🎉❤❤❤❤

[@darrenbrisson4336]

@@CaseysCustoms you don't finish much like bad chad keep going on to thecnext thing before the last things done

[@jack002tuber]

That pink transmission made me laugh out loud 🤣🤣🤣🤣🤣🤣

[@PetesCreativeRecycling]

When you were pulling the engine, I got worried because I didn't initially see trans fluid all over the ground... but then, as expected, it relieved itself.

[@travismerrix4391]

You have one of the coolest car bodies ever created please tell me everything your mocking up is going to get fully taken apart cleaned, rebuilt, and painted!!!!!!! You have a chance to show your skills (your an amazing fabricator/builder) just don’t rush we will gladly watch a 50 part series if that’s what it takes to make the vette perfection

[@donlandenberg8126]

I want this car when it's done. The '63 Vet has been my favorite vehicle since I was 10. Thanks for sharing with us.

[@tinsano6030]

Here to hoping Casey paints the motor pink to match the transmission, perfect Corvette color

[@jasonbose3507]

CASEY, YOU are one funny 🤣 guy!!! I laughed sooo hard witnessing the transmission fluid piss puddle flowing on your floor like a river. I love 💕 your videos Casey, especially when it's a co-op with your Dad. Keep up the good work 👍😊. Great video 📸. Thanks.

[@wikkedspindl]

Yes! My Cannibal Cor-vette made it to the mention in a vid!

[@mortenhenningsen940]

Haha. You un-trans'ed the trans by removing the pink paint. I liked the screaming pink paint,and hoped you paint the engine a crazy collour to. Looking forward to se the blazer return to the shop. I'd go for a shiny olive green paint jobben on it.

[@douglasfehler553]

When this is done it will be wow I still think you should have a 6-71 or 8-71 blower sticking through the hood it just brings back memories of some of the prostrate days in the early 80s,and the lowly Vega man a lot of those were turned into street and strip monsters.

[@JMGilberto]

I have to pull the engine and tans out of my Chevelle soon. I was watching this episode, and it reminded me to go order a plastic transmission tailshaft plug. It was like 15 bucks on Jeff. Something tells me you've spent more than that on kitty litter.

[@3ssfun]

YES YES YES loving the direction!

[@michaelbrinks8089]

Would be cool if you could find a rear gearbox/drive train from a C5 C6 or C7 Corvette for cheap. That could fit easy with easy access for repairs. The looks of a classic C2 with twin turbo and modern performance vette parts underneath is a dream car.

[@jordanoneill82]

i swear you are the craziest car builder on youtube, how can you build so many batsh!t crazy cars all at once?!?!? it takes me 2 years to build a car like what you do, and my work ain't nothin' compared to yours. do you ever sleep?!🤣

[@ianhoyt2638]

Whoo! I'm glad to see more work on the blazer! Can't wait to see some more old projects buttoned up.

[@mohamedyucel4877]

That’s alot of work for one man ❤️🔥

[@impala6524]

Ik I’ve said it before but man the work u do is a 2 man job easy but you get it done 👍🏾👏🏾👊🏽

[@Pinki-77]

Also dont forget about all the accesories on the front of the motor !!

[@BigKrisMorris]

This car would be manual if it was mine. What a driving experience once it’s finished that would be. Would be cool to see Casey build a 50’s bodied chassis swap track day car. He should do 24 hour lemons lol

[@garyvincent9663]

Other fab shows cut the Dif housing to expose more steel axel tube to wield the upper links

[@Jasontodd74]

Don't loose my blazer. Lol. Got some crazy great builds going right now!!! You would think we we're brothers if people didn't know better because we have a lot of the same taste in vehicles!!!! Grew up with family being in car dealerships my whole life and father that was a big corvette fan and had at least one of every year in a huge metal barn. These weren't really for sale. I wouldn't say ever because occasionally he would move one if he found a better one. When I was really young I would stay out there all weekend climbing in and out of all of them. I wasn't as big into vette as my dad but had a list of favorites of course. The top one or two was a '63 Stingray, split window, silver blue not my favorite color but it was all original paint 427big block Manuel. I remember the redline tires. Of course at that age and up through my teens I wanted everything customized. Wheels, paint, exhaust, stereo, and the best way to get speed out of whatever I had. Lol. These cars were all original numbers matching cars that he wasn't gonna change and I was just not getting it then.. now I would kill for 10% of some of the cars I let go of that I had as personal stuff. I changed a handful of times a year to as many as 40 or more each year. I would just do a 6 month note on everything and throw a temp tag and a sale sign in it when I bought it. Might drive one day or months. Just never wanted to make a payment!!!! Lol. Good plan until banker couldn't hold my titles anymore so I wouldn't even put in my name ever. Miss those days. Fast moving times though!!!!!lol

[@ImmersiveGamer83]

That car is going to be epic. Thise stingray bodies look so retro future. Like the future should have been

[@JohnJones-ep7of]

You should be putting the CRX motor and transmission in the Corvette ! I see I'm not the only one that thinks this . That motor and trans with twin turbos in that Vette yeah no question .

[@NMTrue]

twin turbos look great

[@frankennaro4572]

Over 40 years ago, I twin turbo charged a quarterback Ray I believe they were anyways after I put two big burn marks in the fenders because of the heat I rerouted stuff pay attention Casey

[@erikfontaine2046]

thats one badass corvette

[@mondlimyeni8306]

All the way from South Africa bro love all ur content and ur laugh always makes it for me sir 😂

[@user-li9kv9ll8n]

You need a yoke off of a old drive shaft to put in the Trans, no more leaks

[@kipgreenawalt1132]

Gold wing doors would look cool on the vet

[@nathanielhart5267]

Frankenstein + Stingray = FRANKENSTING

[@donaldreese2688]

You may want to put a small tack weld on the oil pickup small block Chevy is well known for the oil pickup falling off

[@andrewwalizer8525]

Put a reduction pully on the harmontic ballancer an it will give you more room on the front

[@bazilwreckerloughead]

That thing's gonna be quite the tire shredding beast when it's finished!

[@lamarwade2753]

I know it’s not a Mercedes but when you see it with no doors, gull wing doors seem to make sense.

[@rustypotatos]

28:45 that just shows you did a lot and most of it right ! Nice

[@Pinki-77]

Weld the 2 brackets together for tge bags.

[@andrewisenbart3404]

Have you Consider moving the frame rails out to the rockers between the front axle and rear and mount your seats below them. That is how corvette did it with their frames, for the c2 and c3, and also the rest. it gives you a lot more leg room, well in corvette size I mean, you won't have the rail between your legs.

[@-Mike-69]

I said the same right from the beginning. The frame is all wrong. He would be better off getting a wrecked C6 and make that chassis work. Who puts a solid axle in a vette ? Great for drag racing, that's about it. This project will turn into another Blazer or Crx. Good intentions but built wrong from the start.

[@andrewisenbart3404]

Or a crappy c4 chassis

[@johnvisner4633]

Hey Casey, before you install the rear air bag mounts you might want to think about the fuel cell location. Not a lot of room back there with a C2 coupe. Love your videos!

[@tombrenes2411]

Awesome content Great build series Love all the hard work Love the blazer smart move to colab (true fans don’t appreciate it)

[@dannyr3346]

Dude your shifter is about to be in the backseat 😂😂

[@randallshelton1630]

If it was me I’d swap the engines put the one that’s in the crx in the vette and put that one in the crx but that’s just me the crx is cool but that vette is so sick it deserves the better engine

[@FastLaneLyfe]

That’s a terrible idea Randall and I love it. Maybe you should think before coming up with such a ridiculously awesome idea.

[@brandonsstaples919]

I'm pretty sure in another video he has an ls3 sitting in the corner. Or some type of ls. As far as a turbo goes it's easier and somewhat cheaper to turbo and ls or vortec. That would be much better for the corvette in my opinion

[@user-hy5bu3og1n]

Yeah no shit u put the engine out of that turd camaro in a could be bad ass car if it just doesent get thrown together like most of these cars

[@randallshelton1630]

@@brandonsstaples919 yeah I forgot about that engine and you are right it would be better to turbo an ls or vortec

[@brandonsstaples919]

​@@randallshelton1630now that I learned he's gonna run an s10 axle maybe he should stick to natural aspiration or he's gonna need some upgraded axles and ring and pinion.

[@miguelpagansr6128]

Damn Casey what the hell? Can't take you anywhere. No shortage of transmission fluid spills 😂.

[@joeethereal2968]

Reeeeaaaalllyy missing that Chevy Coupe/G8 swap...

[@mikemorgan2642]

"Every week, I'm spilling massive amounts of transmission fluid on the floor" Welllll, wouldn't have that problem if you ran a manual transmission every once in awhile. Being an early Corvette, definitely shoulda been a wiggle stick. Hannibal Vettecer is a bad-ass name BTW.

[@mgbv8man2]

Don’t worry about 2” of tar in the sump with the new sump you’ll only have one inch!

[@ohioshitboxoffroad2121]

Why use an s10 rear end over a 8.8 from an explorer. That’s what the s10 guys upgrade to.

[@manciniak]

I have one of those for my Grand Cherokee...its a big a$$ rear end, I don't see it fitting under there without serious modifications but not sure

[@Doingmybesr]

Thats a nice set up you got going brother

[@francisrizzo1529]

always upvote the splitwindow...

[@davidmobley5984]

Looking freaking cool 😊

[@thomaschivers7883]

I'd think about a watts linkage for the rear end keeps it dead centre panhard still moves it side to side just not as much

[@CaseysCustoms]

Yea there is one on the 56 Chevy wagon in the shop, i shouldn’t need to go with one on this but if i see any side to side i might add one. They are a pain in the butt to build lol

[@HicksGarage]

Pass, the lack of room in these cars for turbo pipes is why I sold my c3 instead of turbo LS swapping it.

[@christianodecino2513]

I wanna know how fast u actually go in these cars like what’s the top speed Casey is comfortable with in a Caseys Customs build 😂

[@christianodecino2513]

Don’t get me wrong love the builds just curious when ur just eyeballing stuff how much faith or balls u have as far as top speed and handling on some of these love what you do tho keep it up

[@tonymorris3935]

You aren't spilling transmission fluid, you are making a blood sacrifice.

[@kimberlywilliams9757]

That is going to be one sweet car! 😁👍

[@adventureswithedna]

We watched the blazer video yesterday and subscribed to their channel

[@randydarcey2947]

Astro van is cool😮

[@redwinstead7873]

Love it ❤❤❤

[@marklambert7144]

I wish a rich dude would buy Casey a lift. 😂

[@gr33ngobl1n94]

@caseyscustoms hey bro as I said on the last vette vid you asked for names, I said it should be called Frankenstiens Monster vette as its made from parts of other cars and patched together like Frankenstiens monster. 💪🏾.

[@august67anytime75]

I’ve been watching your channel for a minute now and I was wondering, do you ever finish any of your projects? so far I haven’t seen you finish anything, as in completely finished.

[@CaseysCustoms]

71 ford f100 turbo, 1992 Honda accord, 1965 mustang, 1966 mustang, 1957 Chevy, 1978 Camaro drift/burnout car all were finished in the last 4-5 months.

[@brandonsstaples919]

Are you planning on using a stock s10 rear end with a twin turbo small block?

[@HicksGarage]

Do yourself a favor and get the 8.5 S10 rear diff those 7.5s don't like power or abuse. I know they came in v6 5 speed trucks 2 and 4wd They also came in the zr2/high rider variants. Just saw this in the video, looks like your crank pulley is sitting between the rack and the crossmember. Is there enough room to install a belt?

[@Speedbumpcustoms]

Do a z link instead of a panhard bar. It’s a diagonal link that goes from the front of one lower bar to the rear of the other lower bar.I can’t post a pic here but look at phat phabz rear suspension setups and you’ll see the lower z link

[@impala6524]

OSG! Oil spill garage😆

[@Sj_HONDERO]

Corvette summers

[@MarqusReyes-yi4ww]

Its fiberglass cut and stretch it to fit

[@JeremyIbu]

luvn this build

[@mahdialsenussi3066]

Nice work ❤️ 👍🏼

[@monibo7075]

Caeey i think i can help with your ls swaps i think your main problem is GROUNDS these pre 2000 cars are crazy with those you have to have have engine to chassis chassis to body body to engine ground hell even the diffs and trans like to have the flat metal ground yep alotta cats run into werid issues with ls swaps but the rubber engine mounts and all that good mess with the ground connection

[@HatedBreed000666]

8.8 ford explorer rear end . Factory posi in some

[@darrengriffin9339]

Now we know why there’s a ATF shortage 😂

[@CaseysCustoms]

😬😬😬

[@shanethompson7543]

@@CaseysCustoms 👀

[@vipersniper843]

S10 Same rear diff as Astro / Safari van pretty sure

[@Incaensio]

You know what would be hilarious? Go get your eyebrows done 😂😂

[@finster7582]

is THIS the car ur giving me that i sooo desperately need ??? YOU OR TRANSPORT NEED TO RESPOND ASAP !!! 😃👍👍👍👍👍👍👍👍

[@mitchellransom7418]

id flip the trans mount an roll with it

[@discgolfjunky1]

Make a Frankenstein car. Back half a Camero and front end a Challenger or Charger

[@rogelioortiz5256]

What are you doing with that astro / safari van ??

[@jeffkevin3679]

The parts store must see you coming. Oh hey are you here for some trans fluid .

[@jasonh3220]

is a s10 rearend rated for twin turbos ? might need a better one lol

[@davemills5408]

Corvette slamray

[@waynesmith-r8c]

rear end looks like a 10 bolt,they are glass and like to blow teeth off ring gears etc.....i wrecked one with a stock 305

[@erikfontaine2046]

Whats going on with the van i miss it!

[@GARAGEMVIDIGAL]

WHICH DRIVING SECTOR do YOU ​​use? Which car can I use?? I'm from Brazil and I'm starting a project here.

[@1957kwick]

New motor in the can. YAy

[@Alwhite1929]

What's wrong with the rear end that is in the chassis?

[@nickvoiles4561]

What about the super natural car

[@sirroundsound9104]

What is the first beat playing in this video?

[@Gameguys6982]

Show Casey I got a question where is the supernatural car

[@alejandromartinez8393]

I think they added you to Fortnite with the scrap & burn pack

[@melwatson5225]

Why don't you get an old yoke and put in the back of the transmissions

[@oxagon_]

Def thought you were gonna say Mid engine at the start 😵😵

[@jasonh3220]

I wonder if trans fluid makes concrete stronger... let us know🤣

[@shawnadams2443]

Love ya bro just not feeling the second hand engine. Makes a cool build junkie.

[@Sakuwurak_]

It ia sad how many bots is here😢. Keep up the work man!

[@kaslawnandpropertyservices7692]

I love your builds Casey and I enjoy your videos. I guess its my OCD but why not make everything look good? nice paint ect while it's all stripped down. I get it you're not for it looking like a show car. I just think you could make so much more money when you raffle them off. Anyways keep up the good work brother and please get rid of the pink transmission lol

[@Incaensio]

Hell yeah get that blazer out of here!

[@douglasfehler553]

The try5 chevs were some of my hero cars 2 lane black top project x and many outhers .I would love to see you try to make the movie car the car that was a great movie when it came out little lame by today's standards.

[@joeysciamanna2171]

Do impalalalalalal

[@mortenhenningsen940]

Corps-vette

[@dannyr3346]

Idk why I expected this to not be jank 😂

[@CaseysCustoms]

I’d love to know why you say that