Paintings the canopy and assessing the engine damage. 5020 restoration part 2!

[@straightpipeacres6365]

Holy mackerel!! Music and the whole 9. I thoughtbit was Welkers but rubbed my eyes and saw the yellow paint!!! 👌👌👌👌

[@SouthSaskFarmer1]

Lol getting fancy eh!

[@tomcleghorn4005]

I just died laughing at 11:18 your painting too the music. Never pegged you as a dancer!!! Project looks great can't wait too see the smoke!

[@jeffreyvandervoort8324]

The only group on You Tube that I would gladly buy beers for!🍺🍺🍺

[@SouthSaskFarmer1]

Heck ya!

[@crslyrn]

I can agree with you there, it's not cheap to keep the "Ol' Workhorse" fixed up & going sometimes. Thanks for sharing. 🍻🍻👍🏻👍🏻

[@jesseburns9734]

Thanks for adding the detail review of the Piston wear God Bless you all.

[@clydeschwartz2167]

Excellent video keep up the great videos 👍👍👍👍I would for sure replace the sleeves and make sure that the o rings that seal the sleeves are replaced and the bushings in the connecting rods. The damaged rod may be able to be resized if it is not cracked. You could always do a Kinze conversion that was factory authorized back in the day. There was a kit to put a 8 V 71 Detroit diesel engine in the 5020 then you would have 318 horsepower with out a turbo 350 horsepower with a turbo then you could do high speed farming 😁

[@SouthSaskFarmer1]

Yes they do lol

[@user-qy4lp5pq9d]

Looking good! Hope your ready for the cold weather this week. It should suck!

[@chrisrickets9873]

Wish my dad and I got along as u guys do. Be thankful for that. That’s a relationship I wish I had

[@georgedoorley5628]

yes i would indeed second that ,,,,,,,,,,,,,,,,,what you two got is something to be truly thankful for ............

[@johnviney7919]

Good work guys!! Too bad Antoine (aka "Magnum PI") is not available to be a part of this job - he really really loves the engine rebuilds and is good at it too!!

[@rawfarms2790]

Hey I liked the time lapse. Nice to see you doing something. Lol

[@SouthSaskFarmer1]

Hahaha

[@wranther]

Hi Nick! Well, so how is Amanda doing today? Hope to be seeing her out feeding her herd pretty soon. You selected some good music to enjoy while you were running your yellow paint. Cant wait to here the tune selection for the green either! -Bob...

[@SouthSaskFarmer1]

She's doing real good!

[@dcrawford3320]

What do you enjoy more, Nick, the mechanic work or the body work? I’m sure liking these restoration videos, you guys literally know those tractors inside and out..☺️

[@SouthSaskFarmer1]

Depends on the day lol

[@koryleague8833]

I'm actually kind of excited for this one. First tractor I ever drove was a 5020 rotory hoeing beans

[@SouthSaskFarmer1]

Sweet!

[@martingardener90]

A wrist pin - what we call in the Old World - a Gudgeon pin!

[@robdavis331]

Taking a ridge reamer to the sleeves prior to pushing up the pistons...helps.

[@SouthSaskFarmer1]

If we had one yup

[@STOstuff]

@@SouthSaskFarmer1 you better get one with all these junk deeres around 😉

[@fmerkl]

or a quick hone job just to get the carbon off !

[@rickmckay3039]

A flapper wheel and a die grinder to get to rid of that top ring of carbon and than you shouldn’t need to pound out the pistons they will slide out

[@joukeepstra]

Real nice and clean vidjas.... no bs about all kind of crap. Really nice rebuilt down to earth kind off ting.... keep them comming 👌🏻👌🏻😂😂

[@davidhawken1301]

I noticed when you were removing the one piston you showed on the video the the rings looked real loose in the groove. The ring grooves can be cut and shims used to get the correct side clearence. Excessive ring side clearence is what causes broken rings. Enjoy your vids. Thanks from a old engine machine shop guy.

[@super6954]

Thanks for the video, Man you'd better get that pump done another turn, you'll need a straight pipe as well to get another 15 hp to haul that roll bar and all the new paint up the road L.O.L. The machine shop guys I used before they retired that was in Portage told me those JD offset con rods are a bitch for going out of round over time on the big end, Is it worth getting the others checked you aren't replacing just to make sure you won't have problems with them later. They use to have a huge rack full of reconditioned ones ready to go, so kinda tells a story I'm thinking . Over the years I've learned a few mins careful use with a wire wheel on a die grinder or some emery cloth saves loads of time laid under a motor beating pistons out past the carbon to L.O.L Take care guys.

[@pattoohill5307]

I like the new Antwon. He talks. Lol. Take the Detroit out of the old semi and build an adapter plate. All kinds of power. Lol. Seriously I can't believe no one carries a after market kit anymore. Plenty of them around still. Good luck

[@pennybaker3879]

You guys are hilarious in the shop. Thanks for the Saturday night show again.

[@bobpaterson1845]

Best o luck to a successful rebuild on that engine 💪💪👍

[@dont9098]

Love your work Nick, Good Job

[@CT-bz7cp]

great video as always nick, cant wait to see the 5020 back and running and cant wait till 1682 time

[@SouthSaskFarmer1]

Same here!

[@charleshart6992]

Great progress - should be spot-on when you have it completed!

[@pdruff]

you need before after picture wall in the shop. most don't realize the change. looks nice

[@johndeere5494]

👌nice music clip. That’s mint!

[@DarrensTruckzs]

Great video love the 5020 been so excited to hear you were doing it next I’ve Ben patiently waiting .. sweet tractor 👍👍

[@kurtismiller9544]

21.75 hp = 15%, so 166.75 hp. Not a bad little bump up. Not So Bad... lol. with that many hours she's earned it most definitely Nick

[@SouthSaskFarmer1]

Pretty close for some quick head math eh lol

[@67oilmann]

Looking good!

[@craigjohnson8324]

The definition of a labour of love.

[@darrylkub7933]

What would look really good in your line up is a 3020!

[@WBOS72]

Awesome video. Eventhough its pricey, the old iron bests the new iron any day.

[@SouthSaskFarmer1]

Yuuuup!

[@mikeyoung8126]

Ouch that’s going to be expensive but it’s going to look great and sound wonderful when finished can’t wait to see it

[@andrewstich7117]

Thanks for the video and your hard work you do on 5020 tractor you do very good job on the tractors thanks again

[@keithrobinson1331]

Man that’s a lot of freaking $ good luck 🍺🍺🍻🍻🚜

[@TheFarmingLife]

Hope you had a great day

[@SouthSaskFarmer1]

Not bad hbu

[@TheFarmingLife]

@@SouthSaskFarmer1 getting ready for a big snowstorm to come through the East Coast. Up to 12 inches maybe. Have a great evening

[@jordanbeardy8798]

NICE 👍

[@mrfix3474]

I've gotten some odd out of circulation stuff from quality diesel parts on Portland OR don't know if they are even still there but might be worth a try

[@bikerboy4life41]

You guys should do a sound guard cab on a 5010 5020 or 6030. Would be awesome

[@Murphyslawfarm]

G'day Nick and family great job mate

[@mariusdd6194]

Onelonelyfarmer just dropped a video on the maintenance of his bailers...15k....yeah parts are not cheap. Keep up the good work!

[@canvids1]

always a great funny video, Thanks Nick.

[@GosselinFarmsEdGosselin]

Ain't nothing cheap anymore. I'm pretty sure if it was a new electronic POS, you'd be 5 or 10 times more..

[@TheHelgadog]

Thanks for all the great information. I was curious what it would cost to rebuild a tractor like that and if parts were still available to do it. I have a 730 diesel and parts a scarce for it. I heard John Deere doesn't want to provide parts for tractors past 10 years. They just want you to buy one of their new pieces of crap. Keep up the great videos. Best of luck with your 5020.

[@ivanmoreau1798]

Caseih has been like that for years now

[@Roboticus_Prime_RC]

Oooh a time lapse! Hitting the big time now!

[@SouthSaskFarmer1]

I know lol

[@trailinyoung4443]

Nice timelapse! And great vidga

[@heartwoodfarms9982]

Are you guys gonna pull those sleeves , check for cavitation and replace the o-rings?

[@krismeskil1466]

Love you videos how are you doing today is everything going well

[@SouthSaskFarmer1]

Really good yup!!

[@markissboi3583]

Over the Years all the smoke & paint fumes smells like teen spirit i say

[@kevindaly8265]

The price per hole is getting close to what it would cost to do my 4586 IH . I think I read a complete overhaul on the V-800 engine in it runs 25-27 thousand

[@oldironfarm]

The new Antoine seems to be working out well. Agco's online parts catalog is pretty good. Other than needing a computer nearby that is.

[@kolewiebensohn]

You guys will have her running in no time and ready with the plow for snow, fuck I can't tell you how much I hate snow, currently getting snowed on and a tenth of an inch of ice to go with a 35mph east wind. Good thing the tractors plugged in and generator is hooked up waiting, and the heated snow removal tool is ready to go

[@adambrewer4400]

Are you doing full paint hood and fenders and all that ole beauty will look so good restored

[@Josh-cz8wb]

If money was no object eh! Give the old girl a few more years till your rich and famous anyway. Love see other people keeping the old muscle going.

[@straightpipeacres6365]

I'm eating and watching your vidja il call ya back later hahahaha

[@SouthSaskFarmer1]

Sounds good there jasper

[@straightpipeacres6365]

@@SouthSaskFarmer1 hahahaha

[@reggiefaggart196]

Hi Nick, from North Carolina. How much is the varsal a gallon. Been trying to get it here. No luck. Used to get it for 10ct. A gallon. 50 years ago.

[@tiger5551]

Nick really went all out on the old girl You just know that somebody is gonna give you hate for your music during the painting lol

[@SouthSaskFarmer1]

Yup lll

[@MC-re2ry]

Somewhere I either saw one or read about a 5020 repowered with a 9030 engine. You think?

[@Jaxon-iu6vb]

I have been wrong before but I think you mean an 8030 engine. 9030 would be 2007-2011.

[@jethrogreen-newc6683]

Since when does the 5020 have a canopy? That would look dope though.

[@SouthSaskFarmer1]

They all could if you 9rdered it after 1968 I think

[@DerekHurst]

Thanks for showing the parts manual for the sprayer. I'm guessing you have a factory parts book and service manual for all your equipment? Or do you get them all from aftermarket suppliers?

[@SouthSaskFarmer1]

Nope theybare all from factory!

[@nicklasmodig85]

Hi check one lonley farmer he just visit a junkyard for some parts and they had some nice turbokit for 5020👍🏻

[@conwayfox6233]

Be carful with the crank, it will sag if it’s standing crooked, could cause future issues, and how many hours does the tractor have before she broke, we have on and I just want to have an idea when we should rebuild ares?

[@SouthSaskFarmer1]

17k

[@jeffgarrison6355]

The old girl is gonna look good, did you finish the charger?

[@SouthSaskFarmer1]

For now yup haha

[@richardgraff3724]

Labor of love huh

[@mackenziebaker4406]

Nice nice what is going in after the 5020

[@SouthSaskFarmer1]

A 4020 lol

[@mackenziebaker4406]

@@SouthSaskFarmer1 the one with the roll over bar and loader?

[@SouthSaskFarmer1]

@@mackenziebaker4406 the one where working on yup

[@norcalray7182]

Turbo!!!!!

[@piperdoug428]

$700 per jug?!?! THAT'S INSANE!!

[@SouthSaskFarmer1]

Tell me about it

[@bobcrone6151]

Ouch

[@georgedoorley5628]

@@SouthSaskFarmer1 jcb did the very same also on some older loading shovel parts ........some ofthe smaller items they just added a extra 0 .............

[@lyndonwiens5093]

2:11 who’s on first 😂😂 good old Abbot and Castelo

[@junkhaulertherealone1054]

You should of sang your favorite some for the timelapse

[@pistonringfarms8107]

There is full overhaul kits online for the gorgeous ole girl. Idk if u want that but ive never had a problem with them.

[@SouthSaskFarmer1]

Can't get them

[@pistonringfarms8107]

@@SouthSaskFarmer1 damn. Ig they r all in the states. U said u take ur head and crank to moosomin. Where in mooomin i got a 12 valve head that needs to go desperately and maybe the crank but havent ripped it apart yet. But the head is not happy for sure.

[@SouthSaskFarmer1]

@@pistonringfarms8107 they are shipping it to continental engine in regjna

[@stevenstart8728]

They say you can get parts for any John Deere still. Well try that here. Can’t even get my seat replaced in the 4240. Tried a couple of after market places in the US and they say no or don’t reply. Nobody has ever heard of a brown cab kit for a 40 series. Any suggestions please.👍🇦🇺

[@SouthSaskFarmer1]

There isn't brown in a 40series lol that's all 50 series stuff!!

[@ivanmoreau1798]

Many after market dealers in north america

[@stevenstart8728]

South Sask Farmer does it still fit or is it a bit dodgy?

[@SouthSaskFarmer1]

@@stevenstart8728 should be exactly the same thing

[@stevenstart8728]

Ivan Moreau tried Abilene and never heard back when they got the list. Also tried tractor interiors with no reply.

[@nickmagwa1345]

useing a wood plank to push out a piston nice

[@SouthSaskFarmer1]

Yup can't wreck it that way

[@sterlingwilkey2124]

There you go nick get your 8v71

[@thablue2g]

What does it mean when an engine has spun a bearing. Still confuses me

[@muskegsmith3388]

I have a 5010 sitting in the shed. well worn motor. lots of blowby, I am amazed that it still starts and runs about the same as it always did. the engine experts I talked to call it a "Dinosaur" motor. Just wondering if a 404 combine engine would bolt up? It would still have enough jam to run the discbine.

[@SouthSaskFarmer1]

Nope you need a 619 or a 531

[@Tf9500]

Looks like Reliance makes a inframe kit .I found it on agkits.com. It’s only money Lol. It’s 100% right off. So technically it’s free. Great ol tractor 👍

[@SouthSaskFarmer1]

Nope reliance is sold out amd can't get anymore tried already

[@brianmckin1395]

Do u not use a primer or a sealer before you paint??

[@SouthSaskFarmer1]

Nope just sand and clean it good

[@TinManKustoms]

Well its sad to see prices go up on the old girls parts but on the other hand look you gotta look at the savings end. If you bought a brand new tractor or even a leased one you're no wear near that price range yet so even if you spent $8000 on it and got another 8 years or so thats a huge savings.

[@SouthSaskFarmer1]

8 years. It better give me another 50 lol

[@tyerock7851]

Would the 5020 be able to run the 1682?

[@SouthSaskFarmer1]

Not to its full capacity.

[@tyerock7851]

@@SouthSaskFarmer1 you’ll have to make some baby swaths with the 400 versatile 😍😂

[@fritzheidi2647]

it's a 50-20 bite the bullet somebody somewhere has a brand new set up with you need to rebuild that trick is finding it

[@57REDROOSTER]

It's to Damned easy to roll bearings in... I don't understand some of the stuff I've seen either knowing the guy just had it apart and put it back together

[@SouthSaskFarmer1]

Exactly

[@dmk1529]

Look up ytmag on line. They show a rebuild kit for 3700 us. I don't know where they get them. (China,usa,etc...)

[@edreisinger5757]

Did 5020s have enough oil cooling capacity to add a turbo successfully?

[@ivanmoreau1798]

Seems to have worked for some guys

[@blacklisterd]

I can’t believe Twan just walked out on us. UFB. What a guy.

[@georgedavidson7986]

I thought he went to work for the winter at the feed store . If you know more let me know . He was a real good worker

[@blacklisterd]

@@georgedavidson7986 I think Nick said he is working at the local gas station because it’s easy to steel prophylactics from there.

[@georgedavidson7986]

@@blacklisterd No Nick said he is working at the feed mill but that is all he said .. Not sure about his future

[@gregggerber2626]

Paying John Deere prices.

[@KaseyCullum]

How much does the 5020 weigh?

[@SouthSaskFarmer1]

24000lbs

[@tiffanyhall3216]

Wait till you start on that Allis Chalmers there are a lot of parts you can't buy at all

[@SouthSaskFarmer1]

I think it's sold already lol

[@kennethweems5345]

Where is Antoine did you fire him

[@Man-cv5ws]

Anyone ever heard of filling the roll bar full of sand to eliminate the vibration from the 20 and 30 series Canopies? I love the look but they are loud.

[@SouthSaskFarmer1]

It's solid iron mate can't fill that lol

[@Man-cv5ws]

@@SouthSaskFarmer1 the roll bars on our 2630 2030 4020 are all hollow and the roll bar is one piece. And our 6030 with cab has a 3 piece like yours with 2 solid post. I was told the hollow tubing could be filled with sand and stop the vibrating canopy idk.

[@dalefackler8726]

Finally someone wearing a Roughriders shirt

[@SouthSaskFarmer1]

Lol

[@awstott]

Get the watermelons out and you'll be all set!

[@bryancovert9821]

165 - 170 HP , that's like a 6030 , Buddy , YEAH !!!!! FUCKING NATURALLY ASPIRATED , WOW WEE , GOOD FORM , eh .. When you finally get that 6030 , you'll have to run it up 225 HP , and put LSW TIRES to transfer the power to the ground . Put a turbo on Ivan's 4020 , eh , that will hot rod the old girl up ..

[@SouthSaskFarmer1]

Still won't touch the 4640 woth 245 lol

[@bryancovert9821]

@@SouthSaskFarmer1 just the cool factor , Nick !! Not the most outrageous , you know , just COOL MAN !!!!!

[@Deere70Diesel]

A guy got thinking the other day....you should invest in a dyno. As many rebuilds as you have done it would be nice to pin their ears back and break them in real good and just for general Tom foolery to “burn the carbon out of them”

[@ivanmoreau1798]

We have been talking about one

[@SouthSaskFarmer1]

We can't find one though we have tried

[@Deere70Diesel]

@@SouthSaskFarmer1 I believe it! It's even rare in the states to see them. I'd love to have one myself

[@straightpipeacres6365]

Peices everywhere lol

[@SouthSaskFarmer1]

Yup lll

[@scottkrieger4701]

Is it time for new rubber tires for this lady.

[@ivanmoreau1798]

Hope not

[@SouthSaskFarmer1]

Noope lol

[@timmartin4959]

Hey Nik what the he'll is going on with u tube for the last 2 the 3 weeks it's not letting me no when you post and I like the the time laps do more of them

[@dougaltman2136]

because their censors have to go thru every canadian comment

[@SouthSaskFarmer1]

Yup its dumb. I plan on it!

[@africadreamin]

Over here we call piston and liners, pots and pans I'm currently rebuilding two IH 444's simply to keep my hand in.

[@deerezilla7013]

Look up ag kits.com they have reliance 531 kits I did a 6030 last year from them

[@SouthSaskFarmer1]

Nope they don't make them anymore either!!

[@MrJohndeere3720]

when ur done u can paint our l-130..lol u'd do better then me...

[@SouthSaskFarmer1]

Bring it up lol

[@MrJohndeere3720]

@@SouthSaskFarmer1 lol :)

[@scottkrieger4701]

How's your wife doing now. Good I hope.

[@SouthSaskFarmer1]

Really well!