SP-404 MKII - Tutorial Series EP-28 - The BUS FX By Nervouscook$

Рет қаралды 6,666

NervousCook$

Күн бұрын

Пікірлер: 29

@devine999 6 ай бұрын

Many thanks! When I look up something about the SP and I see your thumbnail, I always sigh with relief.

@TABARNAKdeBEATS Жыл бұрын

Perfect explanation! I was driving myself insane cause I had bus 1 running in to 2. This helps so much. You're a legend!

@Hakucho64 7 ай бұрын

One thing that you didn't mention that confused me for a while was the flashing (or not) of both the [BUS FX] button and the six effect buttons. After some RTFM on my part, it turns out that if the [BUS FX] button is solid, then BUS 1 is selected, and any effect button assigned to it will also light up solid. Whereas if the [BUS FX] button is flashing, it means BUS 2 is selected, and any effect assigned to it (even an MFX effect) will also have its button flashing. The other thing that confused me for a while (yes, I'm easily confused) is why the status bar above the BPM number would sometimes show BUS-2 when BUS 1 was selected. As it happens, the status bar shows the details of the current project and pad (e.g. P-1 A-5 BUS-2 Fix DC). So it shows the bus to which the current pad is assigned, not the bus that's currently selected according to the [BUS FX] button.

@markpohlmann5965 Жыл бұрын

FX Bus is the secret weapon of SP, which I still have to learn. This helps a lot. Thx for your precise and explanation.

@landonewts Ай бұрын

Still learning the 404, and I accidentally hit and assigned the Bus effects during a very chaotic rehearsal, and couldn’t back out of it in the heat of the moment. Now I feel better equipped to rectify that, and actually USE the Buss Effects. And I highly recommend Roland’s editor/librarian app if you need to load and manage a ton of samples and projects easily and quickly. It’s been a lifesaver for me.

@lennoxdin Жыл бұрын

Best explanation I’ve found, thanks!

@nervouscooks Жыл бұрын

You’re welcome 👍🙂

@onstr 10 ай бұрын

This cleared up so much for me. Your tutorial videos are all rock solid. I had already put a pad on bus 2 but I think I'd done it by going through mute groups or something. BUS FX and REMAIN is sooooo much quicker and easier.

@erdemergaz6987 Жыл бұрын

Excellent tutorials, very useful.. Thank you 🙋🏻‍♂

@thebl8nlyblatantnetwork 10 ай бұрын

Remain 🔥

@coolasroro Жыл бұрын

thanks again :)

@datops 4 ай бұрын

How do we press the play button on the sp? Also, how do we record from the first record button not the resample?

@its1amsomewhere Жыл бұрын

Is there a way to add a bus efx to one pad in a pattern? When I tried to do this, the bus is on all the patterns

@frederichwalker3400 Жыл бұрын

Yes there is

@surf8941 8 ай бұрын

Yes, he demonstrated at 4:48, hold BUS+remain then select the pads you dont want to effect. The white colored pads will be as is and the orange pads will be with the fx you applied on your BUS.

@viviencharrier1984 Ай бұрын

How to let "dry" white pads be affected by bus 3 and 4 ? they do not on my sp...white pads just do not enter any bus... how to modify this ? I mean if I want compression on my full mix that also applies to the samples that have no effects on. If it's a master bus it's a master bus 😂😂

@mattspence5926 9 күн бұрын

I’m wondering that too

@viviencharrier1984 9 күн бұрын

@mattspence5926 I have found the solution for this. In effects settings/other/ go to " dry routing" and change the value "dry" to "bus3" and here you go 😊

@mattspence5926 6 күн бұрын

@ amazing, thank you so much!! :)

@billB101 10 ай бұрын

Great explanation but ( as an audio engineer ) that has to be the most convoluted buss FX send I've seen on any piece of gear yet. Why didn't Roland just have two ( or 4 ) buss effects and then a send level into each per pad?

@nervouscooks 10 ай бұрын

Yeah I agree, it’s not at all intuitive and took me a while just to understand. Like you said there are easier ways! 😂

@billB101 10 ай бұрын

@@nervouscooksLoving the machine itself though, it sounds superb and the timing is rock solid.

@boothbuster 3 ай бұрын

Yeah the sp-16 / DJS1000 is so much more intuitive for effects routing... MPC too to a degree. I guess they figured this was probably going to be mostly used as master effects so just being able to block a few sample pads from getting effected was the goal.

@achook9474 11 ай бұрын

Question 🙋‍♂️ does the sp404mk2 have a glide/pitch/portamento glide function between pads? So that when playing a bass let’s say it slides up or down from 1 note/pad/pitch to the other note/pad/pitch? Thanks

@woef 10 ай бұрын

you can legato in chromatic mode

@willybobo8846 Ай бұрын

why is it when i put fx on bus one and two and apply them after a few minutes of messing with my beat they bypass on their own? they don't stay on?

@datops 4 ай бұрын

How do you save a beat?

@saggygnaw 6 ай бұрын

Sorry to be pedantic but you don’t send effects to the pads, you send the pads through the bus effects, as with literally any mixer with send knobs. That’s the whole point of a bus, you have a single place that processes multiple sources which are sent through it. Also I think using industry standard terms like series or parallel routing helps beginners understand the terminology, which translates to other devices and mitigates confusion in overlapping terms.