Space Rider kit for Heritage Rough Rider

[@kurticus]

Update video Heritage Rough Rider light primer strike fix video kzbin.info/www/bejne/bWiWoYeXmM6Ujdk

[@davehahn7291]

I just fixed mine today and it is now working 100% reliably! I was having light strikes 9 out of 10 rounds. Here’s what I did- The hammer wasn’t flat near the top of the face due to a casting defect, file the hammer till flat. The spring on the cylinder hand was not centered and causing friction which slowed the hammer. Use a small punch and center the leaf spring. Place a small shim at the bottom of the trigger spring near the retainer detent. Hope this helps!

[@Smakula]

Thank you Kurticus, very cool.

[@C4_316]

Mine had LPS issues. Cleaned it with a cloth on the range. Worked fine. It was just dirty.

[@dgblubz244]

Space cowboy yeeeee hawww

[@kurticus]

🤠

[@jeffreylowman7322]

How do you download the pattern for the upper? Where do you go to get the print pattern?

[@quintoncarter1320]

Hey check out the video where a guy puts a small washer in between the frame and hammer spring! Easy fix to tighten up your light strikes

[@kurticus]

It's the exact same thing, just shiming the hammer for extra tension

[@DanKage]

Do you still have this file for sale? I'd love this add on for my RR.

[@brando3392]

Would you he willing to sell some of these shrouds, i would love to buy one for mine, they look cool but mainly bc the iron sights are terrible on the gun. So heritage was taken over by taurus who are notoriously unreliable gun makers, so that may be part of the problem. But you can't beat the cost and they're fun to shoot

[@voeunsavothy508]

Can you post a link for the print code

[@Olgrandpalarry]

Hey so I was planning on doing this myself but how to I install this onto my rough rider could you do like a short tutorial that would be amazing!

[@kurticus]

Remove the extractor housing and replace it with the printed part. Its only one screw

[@Olgrandpalarry]

@@kurticus What about the spring and metal extractor thing? do you just swap it to the printed chassis?

[@kurticus]

Yup

[@kurticus]

Just one screw to take off the extractor housing, move the extractor and spring to the new printed kit. Lastly, slide the printed kit on and replace the screw

[@Olgrandpalarry]

@@kurticus thanks man!

[@JDMsohc]

What infill % did you use? I read that Vin suggested 20% and triangle infill pattern, but curious if others have done it that way. I'm so used to printing my pews at 100%.

[@kurticus]

I think I just did 100%

[@kurticus]

It shouldn't matter because there's no stress on it

[@give_guns_a2_chance499]

Where can i find those files?

[@bluebeastsrt]

I was wondering who was the one guy that bought this kit for a hundred dollar gun?

[@kurticus]

It's 3d printed. I made it for about $1.50

[@davidescudero8889]

​@kurticus where can I get the STL? Love this design.

[@jeffreylowman7322]

Where do you find the SD file to download the design?

[@MillisBaker]

did you ever find a download? everyone online is so damn cryptic when talking about designs, i don't know if its a youtube policy or what. but no one will supply a source

[@jasonjulian1]

@@MillisBakerThis file set and the other designs by Booligan are on his Odysee page. But yeah YT shuts down a lot of comments and such directing people with links to this sort of thing.

[@MillisBaker]

@@jasonjulian1 thanks. i found it later that day. idk why people dont just say visit his odysee page. is that website also not allowed to be mentioned on YT? ive never heard of it before

[@jaimevalenzuela622]

How do u get it?

[@kurticus]

3D printer

[@phillkatphillkatmeadows5095]

Can you make me a body kit for a bearcat 22 I'll pay you for it

[@ShootingwithAngel]

Answer the comments please sir

[@kurticus]

Booligan Custom Gunworks

[@Thebiggdogghorrorhound]

Boring

[@ClickClack_Bam]

I can't find the files for the 16 inch barrel. His website wants money.

[@jasonjulian1]

He moves them to Odysee after they're on his paid site for a while. If you go there, search for Booligan, you'll find them all there.