Spark Plug Replacement Suzuki GSXR1000

How to replace spark plugs Suzuki Gsxr 1000
step by step instructions "How to Replace Spark Plugs" (motorcycle)
(2005-2006) Suzuki GSXR1000
Instructions:
Spark Plug Specs----------------Gap(.28-.32in) Torque: (8.5) Ft(lbs)
1.) Remove Seat(2 bolts)
2.) Remove Plastic Pieces(2) (Side of Tank) Pull & Pull Back
3.) Remove (2)Bolts On Gas Tank(Front)
4.) Prop Gas Tank Up
5.) Loosen Up (4)Clamps Under Air Box
6.) Remove Air Box (Top of air box NOT required to remove air box)
-Right Side: -Left Side:
(2)Breather Tubes (1)Sensor (Blue)
(1)Sensor (Green). (1)Breather Tube(small)
7.) Remove Air Box From Intake (pull out)
8.) Disconnect (4) Wire Connecters (Ignition Coils)
9.) Remove (4) Ignition Coils From Engine
10.) Remove Spark Plugs (4)
#howto #motorcycle #spunkyboyy #gsxr #sparkplugs

[@SpunkyBoyy]

Instructions: (2005-2006) Suzuki GSXR1000 👇 Spark Plug Specs Gap(.28-.32in) Torque(8.5) Ft(lbs) 1.) Remove Seat(2 bolts) 2.) Remove Plastic Pieces(2) (Side of Tank) Pull & Pull Back 3.) Remove (2)Bolts On Gas Tank(Front) 4.) Prop Gas Tank Up 5.) Loosen Up (4)Clamps Under Air Box 6.) Remove Air Box (Top of air box NOT required to remove air box) -Right Side: (2)Breather Tubes (1)Sensor (Green) Left Side: (1)Breather Tube(small) (1)Sensor (Blue) 7.) Remove Air Box From Intake (pull out) 8.) Disconnect (4) Wire Connecters (Ignition Coils) 9.) Remove (4) Ignition Coils From Engine 10.) Remove Spark Plugs (4)

[@luisr7575]

Was about to pay 200 euros to mechanic change them Your video helped me a lot Truely well explained, easy tutorial to follow, high quality footage and pictures. Simply perfect HUGE THANKS BRO 🔥

[@SpunkyBoyy]

Glad to help! Thanks👊🏻💯

[@HalfSkull]

Gotta love gsxrs man. The easiest of all the manufactures to work on I swear. I self taught myself everything and learned to work on my bike(s) through youtube and trial and error. Something as simple as sparkplugs always intimidated me when I owned my R6, especially because the clearance with the frame was so tight, and the plugs were so stupid hard to reach. I'll never forget taking my airbox off for the first time on my GSXR1000 and just being baffled at how much room I had to work with on the head of the engine.

[@scrwbl8]

Tip: When screwing them in, first turn them counterclockwise until you feel a click and you'll know you're at the start of the thread.

[@AbsolutGSX]

Probably the most beautiful GSXR colour I’ve seen

[@Mrking1-g5d]

Brother you should also make informative video like your previous video of cornering.its quite easy to understand .❤❤❤❤❤❤❤❤❤❤❤❤

[@CROTCH_ROCKET_JOE]

You mean a universal knuckle for the socket. Use a rubber hose over the plug to start threads. Anti seize compound can be used on threads too. Take pics or vids as you dissemble.

[@markanthonypetra]

Recommended torque is 8 Ft/lbs....if you don't tighten them enough the crush washer won't compress and they will leak.....tighten the plugs so the sealing washers compress, back off and tighten again.

[@RA109E]

Please do longer vids on the new bike.

[@allenvayner4987]

Good video man, like always. Youre like the rockstsr of motorcycles, no cursing keeping it legit 💯 thanks

[@mboaofficials4284]

Great video!!👍👍

[@GunpowderNitro]

If u don't have a socket with a grommet a old car plug wire works great clip the wire off and use the long end 💯💪

[@user-lv4lm4zl5o]

Thanks man

[@Bharatkhanddarshan]

Very good job work 🎉

[@Coremaster211]

Sheesh! Love the new bike! Can't wait to see what other videos you have lined up for it.

[@Gideon_Judges6]

That's gotta be a 0.028" gap. A 0.28" gap would be huge for a spark plug electrode!

[@allenvayner4987]

Jesus loves you ❤

[@Gtgunnaz]

Great video as always!

[@SpunkyBoyy]

Thank you👌🏻💯

[@joshuasegarra3462]

What size socket did you use for the spark plugs

[@user-kn7pg6ty2y]

Use the plug coil to remove the plug

[@andrewford264]

Great video 🤙

[@luisalejandro750]

Excelent

[@verheydenyannic3590]

New bike ?

[@PSYMAN69]

Is this bike running better now since the last videos?

[@paul7498]

Awesome

[@Simple5.0]

I don’t get these guys in the comments. I mean, they’re good for views so whatever I guess. They think you’re wrecking your sh!t but if they heard you talk for 5 seconds in any video they’d know you care very much about your bikes. Maybe watching 6 minute videos is asking too much? Can they really not see it’s an edit? All the audio is added in post and it’s literally impossible for me not to see it and I know nothing about editing. wtf

[@hsjshdihss5326]

👍👍

[@allenvayner4987]

Off topic but - Soon, there is going to be the rapture. It's when there will be trumpet sounds, and after the trumpet sounds, God will lift his people from here. Also, God said people should be living by the Bible. Amen, and God bless you. * John 3:16 - "For God so loved the world, that he gave his only begotten Son, that whosoever believeth in him should not perish, but have everlasting life".

[@CycleTechLLC]

I dont think that's his real hair

[@wictorqqq]

Ive never seen a girl do this