Speed Testing 16 RC Car ESCs Hobbywing 1060 1080 TBLE-02S TBLE-04S ISDT ESC70

[@mattiasrc]

Hi there, this is just what i was looking for. Im on the hunt for some nice cheap 60A esc´s and this test was very helpful. Thanks a lot.

[@rustafar_2354]

Great Video. I've been running a New Rain 320A w/fan for quite awhile now in a 1/10 cheap basher on 2s, still running. 👍

[@r.a.wrcfootage5511]

Almost forgot I put a capacitor on it. And I’m running a 13t hacmoto brushed.

[@JoevsRc]

Thank was a very informative comparison. Thank you

[@NewLifeeight]

Which one will run an 8 turn motor ?

[@polishguywithhardtospellna8227]

Thanks a lot, very informative

[@craigpimlott204]

I tried 2 tble 04s esc’s and both lost reverse on their first runs and wouldn’t revert back to brushless after being used with brushed motors .

[@Dowan_Gim]

Thanks for the information.

[@RCsRCCars]

You’re welcome. Thanks for watching.

[@jaja5870]

Brilliant testing and great to know the results. Maybe next try the same tests on a faster brushed motor - say 23/25 turn or better and brushless motor where possible.

[@RCsRCCars]

Good idea. Thanks.

[@BriansRCStuff]

Outstanding video. Do you have any idea how the Traxxas XL5 would compare to the ESCs in this video?

[@madsrcbuggy]

Very nice video, it was in my suggested feed from the KZbin AI, I liked it a lot and I have subscribed! Very well presented, I agree about everything you said, and I have the same favourites, ha ha! HW1080 is my all time favourite, both for crawlers and buggies, but recently I started buying ESC70 and I have been very happy with them. You asked about that Rain ESC, I had one and it died first time I ran it, it was a 15 turn motor and a Tamiya DT-01 buggy that killed it, and to be fair, that combo also killed a HW1060, ha ha!

[@the.just.able.biker67]

I've just killed my Tamiya hobbywing 1060 in my Tamiya mf01x chassis. I fitted a 23t pinion, TL01 high speed gear set and I stiffened up the rear diff with silicone ear plugs. So yeah....I think that was all too much for it. 🤬🤣 I'm now trying to find an esc that'll be able to cope with these mods.

[@wisney_snyps]

very nice

[@RCsRCCars]

Thanks

[@kennethholland4627]

Please forgive me if my questions sounds stupid or ill-informed but I am new to all of this and have much to learn. I am building a crawler with a real time camera mounted on it to use for crawl space inspections. The intended purpose for this vehicle calls for low speeds, forward and reverse. I am understanding that I need two ESCs to drive the two separate motors on my tank chassis. I actually have two pair of ESCs. I have two Hobbywing 1625s and two New Rain 160As. First question: Which of these would suit my purpose best? Second question: I've been told that I must switch the master controller on first and then switch on the slave unit. I have a master switch on my battery pack. Would they work just as well if I bypassed the on/off switch for each and let them power up together when I switched the battery pack on? And the last question: If my receiver is powered from another source, should I remove the red power wire from BOTH of the ESCs? Oh. The receiver that I plan to use is the Flysky FGr12B, if that makes any difference. Thank much!

[@RCsRCCars]

Unfortunately I do not have any experience in tank electronics or dual ESC setups.

[@kennethholland4627]

@@RCsRCCars Thanks just the same.

[@VUO4E]

I'll try to help : either pair of ESCs will work fine because of the extreme gearing on a tracked vehicle. If you have a separate receiver battery, you should remove both red wires because both ESC's will deliver receiver power through their BEC. For the next bit I'm not a 100% sure but the 'master-slave' thing you mention specifically applies to brushless ESCs - I think.

[@timothylucas-gear2124]

Hey mate, I've been running a rain 480 in a WL TOYS A979 for a few years, it's the only ESC I've put in that car that hasn't fried itself and still going strong!

[@owen8538]

What motor and you using 3s

[@mikemorton7149]

So helpful my question is better repair compactors or get another oh its brushed i bought online from Walmart for like 12.00 or something and brand is Bdesc-s10e- rtr 2-3 lipo -5-9 nimh bec 5-v 2a xijaia0206 bought in September last yr what happened was i used two nimh 1500mah it went very fast but then it stop working lol i knw too much power oh my car is a fast and furious doms 1/12 charger it has dual 380 motors ftont and rear so whats best advice u can give me to be able to tun this vehicle thank u sincerely mike from Redford Michigan

[@RCsRCCars]

I'm not familiar with the car or ESC you mentioned. I don't want to give you any inaccurate advice. Best to contact the manufacturer.

[@owen8538]

Hi what 1 do you think can handle 3s 13t brushed motor on gorgon

[@IntegraDIY]

Would’ve been cool if you tested the tble-02s like shown in the thumbnail 😮

[@RCsRCCars]

You are right. I don't know why I didn't. I know it's very similar to the TBLE-04S.

[@JoevsRc]

Did you ever do the test with the euro truck?

[@r0cket_penguin]

I would add the Carisma ARC-2 ESC. I use them in my brushed crawlers and I prefer them to the 1080

[@IowaBudgetRCBashers]

Great video

[@trere362]

I ve got new rain 35a/160a with 390 brushed motor in Wltoys a979-a(my fpv car) on 2s 30c lipo and its preaty good overall/ geras 17t/38t.

[@knightdeluxegaming]

Across the esc, who can handle 3S Lipo nicely without burning?

[@RCsRCCars]

The only 3S/brushed experience I've had is with the HW 1080 in a TRX-4. I had no issues there.

[@mk1baz72]

i’m using the isdt with 3s 5200mah 80c that’s fine in my crawler

[@cw-01creations46]

Rain 60a can handle 2s and 3s batteries

[@knightdeluxegaming]

Is goolrc 60a clone same with hobbywing 1060?

[@RCsRCCars]

A lot of brushed ESCs have the same layout and form factor as the HW 1060. I've never cracked one open to see inside.

[@michumichu3339]

Hobbywing 1060 =carson?

[@ptaku2007]

That no brand esc was actually used by hsp on their smaller models. I know that, because I have one.

[@r.a.wrcfootage5511]

I have the rain 480 esc but it’s in a shelf queen. I’m thinking about running it🤫🤫

[@RCsRCCars]

I don't know which car I should put the 2 Rains into.

[@r.a.wrcfootage5511]

@@RCsRCCars I have mine in my tamiya TL01

[@hendrahendra]

Im gonna buy the IDST 70 and give it a try.

[@RCsRCCars]

The mobile app is pretty interesting. I like being able to see the throttle %.

[@plethman3669]

Tamiya battery connectors are terrible and wear out and become lose. This will cause a major loss in power and create variables in the amount of current available between each connectors lose/tightness. Tamiya connectors can damage the esc, stop using the Tamiya connectors and start soldering quality connectors.

[@RCsRCCars]

I haven't experienced any of those problems myself but thanks for the feedback.

[@IowaBudgetRCBashers]

New subscriber

[@RCsRCCars]

Thank you for watching!

[@JustTheRat01]

the no brand 60 literally burnt up in like 20 minutes for me

[@JustTheRat01]

figured out why the jumpers programmed the esc to use nimh batteries didnt program it myself, was already on nimh instead of lipos

[@electricnitrorc]

Mine burned after 10 minutes 😬

[@BrendanRaymondKoroKoro]

That was the most pointless test i've ever seen... You proved nothing...