Speed up your AQUARIUM FILTER MAINTENANCE ⏱💨

[@JurijsJutjajevs]

Are you using dbl tap quick release connectors? What are your thoughts about using a smaller size outflow?

[@jonahschwarzz]

Are similar or those products available in the United states

[@JurijsJutjajevs]

I couldn't find them on Amazon so I guess they are not yet available in the states.

[@Sunshinehuricane]

Jbl needs to make lilly pipes and rounder plastic in and outlet pipes 90degrees pipes restrict to mutch. The connecters are great

[@asplinnos]

My thoughts 💭 are not really good. I imagine my fish in a washing machine or like having inside my tank a water beam like laser😱. I try to keep nice water recycling without extreme surface movement. The opposite would it be beneficial I believe.

[@PB-ny4qw]

The downside to doing it is youll give your filter a worse "lifecycle" the rotor / engine part isnt build to push water trough a smaller hose / adapter solution (Even tho the lilypipes look 100x better) So in the long term your filter is probably going to have trouble / failure because of this "trick" ... Shame tho, would love to run even more "invisible" glasware on my tanks :( But for me not worth the eventual risks it involves with the filter

[@RyoWatanabee]

Thanks for this tip! I have 2x eheim quick connectors and am planning to use for my soon to set up 60p tank.

[@JurijsJutjajevs]

this connectors make aquarium maintenance so much easier! Looking forward to see some new updates on your own fish room

[@giro2504]

This video is definitely one of the best that you have ever published in the pro tip series so far! Very well video editing and also great recording! Thank you very much for the information about the new connectors by JBL. I'm looking forward to use them in the future!

[@JurijsJutjajevs]

Hey Giro, glad you like this video. How is your sterilizer DIY build coming together?

[@giro2504]

@@JurijsJutjajevs I never thought that you actually follow / recognise my content on Instagram 😲 It's actually kind of stucked at the moment because I am moving into a new apartment. I created a new revision of the reactor because I have been facing some issues when glueing the reactor together. I am also trying to find better solutions for the mesh of my reactor because stainless steel seems not to be a suitable solution since chromium and other non healthy ingredients are in stainless steel that dissolve in water when an electrolysis is performed and can potentially kill the fish / shrimps / snails. Titanium or platinum is a suitable solution but it's actually very hard to find some sort of mesh for testing. I also created the first electrical hardware but it's only existing in a simulation program I am using on my computer. I also want to make it safe to use according to DIN EN 60334 which is a functional safety standard for products that can be used at home. So as you can see, I am facing a lot of different circumstances at the moment but I will hopefully manage to get everything together somewhen :)

[@JurijsJutjajevs]

@@giro2504 I see a lot of things 😉 keep up the work, it seems you enjoy it

[@giro2504]

@@JurijsJutjajevs Thank you very much! I do have fun with that project. It might look very easy in the beginning but if you continue to dig deeper you always find new barriers that need to be solved. I hope that I will be finishing this project in the next few months :)

[@markgarrett2971]

I use the eheim for all 4 of my aquariums. Great tip. And yes, I have accidently opened the top ball valve and had water everywhere!

[@JurijsJutjajevs]

haha, this has never happened to me before, but when the tap is disconnected and the lily pipes inflow is remaining in the aquarium and you know accidentally it can happen, it scares the crap out of me 😂

[@Mapantz1]

The quick release taps are a godsend! I absolutely hate faffing with the pipework on cleaning day. I have them on one tank, but not on my other, as the Eheim ones are a bit too expensive. I will be checking out the JBL ones though, Jurijs. Great tips, as always.

[@JurijsJutjajevs]

I started using them on a client project and ever since they have spread across all my scapes 😆

[@asplinnos]

Finally the quality of big company in affordable price. I liked the connector advantage to upgrade or downgrade hose’s diameter. Nice review Jurijs👍

[@jimmygimbal]

I enjoy this Monday series!!

[@JurijsJutjajevs]

Hey Buddy, thanks for watching. I loved your recent Vlog style fish room tour. Having a camera attached to the maintenance cart 🛒 was genius

[@dark_scorpion6072]

I'm new to external filter usage and since I installed mine, always wondered how to take them apart without brake a lily pipe! Now I know!! Thanks for another pro tip!!

[@JurijsJutjajevs]

To remove lilypipe from the tube - first gently push it deeper inside the crack the seal and after that you can slide it out. Fresh tubing grabs the glass really well, so you might have to make rotating moves to get it out gently

[@raveG244]

My Eheim Classic 150 (US) came with two sets of these. As you say, they are super useful. Great tip!

[@bailey50100]

I have the old Eheim Classic series and the feature I love the most is the quick connect taps. They just make it sooooo easy. I never thought about using separately. Or interchanging. Good tips. 👍

[@JurijsJutjajevs]

Like I said in the beginning, it’s something we all know but potentially don’t think about 😉

[@jdavids1332]

Where should I put my inline co2 diffuser, before or after the quick connection tabs?

[@JurijsJutjajevs]

After, otherwise pressure will build up when closed which will result in a blow out when tap is opened again or can cause the tubing to pop off from the tap!

[@Aquagold.goldysingh1313]

Good product...you always give beautiful tips... keep it up

[@JurijsJutjajevs]

Thank you

[@JonBeechxD]

That EHEIM double tap connector here in australia costs 80+ dollars to pick up from the LFS. crazy how different it is in pricings around the world

[@Warden2]

Just in time for a Pro Tip Monday. :D Up until now I haven't used a double tap quick connector but maybe on my upcoming 90-F scape? We'll see, they definitely make sense.

[@JurijsJutjajevs]

thanks Kay, give it a try 😉

[@TOPEC]

u can also use the quick connector to drain ur tank, n dip the outlet side into a bucket of water n turn on ur canister to refill ur tank.

[@JurijsJutjajevs]

Yes you can do that. I have created a system just like that at a new clients place

[@patriciobagshot9740]

always with an educational video, you bring us good advice to put them into practice.

[@JurijsJutjajevs]

I try my best - I learn my self every day and I try to share as much as I can

[@patriciobagshot9740]

@@JurijsJutjajevs and that is appreciated, you are great. 👐

[@TheWonderofCichlids]

Love the little desktop tank.

[@JurijsJutjajevs]

Thank you, it had turned out really nice

[@karelyou2]

I have both JBL and Eheim 16/22 quick releases and one thing to note is that the levers are a bit larger on Eheim and so is the mechanism (the actual ball valve) and it definitely feels more robust in operation. I am still using both so will report if all is good.

[@JurijsJutjajevs]

Yes small difference there is in build quality, But significant in price

[@digitalmanufaktur]

Hi Juris, bei Minute 3:05, hast du da ein magnetventil hinter dem ADA Druckminderer? Gibt es dazu ein Video, wie du das aufgebaut hast?

[@JurijsJutjajevs]

dabei handelt es sich um den UNS nano druckminderer, ist baugleich mit dem von ADA, hat jedoch von Haus aus die Nachtabschaltung mit dabei

[@digitalmanufaktur]

@@JurijsJutjajevs Wo kann man den kaufen?

[@JurijsJutjajevs]

Ich habe meinen aus USA, hier habe ich diese noch nicht gesehen. Kostet auch nur 100$ dort. Man braucht aber einen passenden Adapter für unsere Mehrwegflaschen. In USA ist ein anderes Gewinde

[@adomijan1606]

One more tip. Because conectors are same put one upside down then you want mix in and out tubes. I see that on both connectors you have nuts on lower tubes.

[@urbansk8r231]

Hi, I see the fish aren't the one's to have a good place to call home. Nice house you like in. Who did the decore? I'm new to external filters, as i just purchased the Eheim classic 2213 250 canister filter..as it was on sale. So I have a few questions. Q1- Do those connectors ever leak from time to time? Q2- I'm new to canister filters as I just purchased the Eheim 2213 250 classic on sale. I have carpet on my floor, so what would happen if I have a blackout in the middle of the night when I'm sleeping?..would the water back up or drain tank an flood floor?

[@JurijsJutjajevs]

connectors itself never leaker for me. If you do a bad jo connecting the tubing, maybe.. in case of blackout ( power off) the canister filter will simply stop working. Thats the benefit of a canister over a sump

[@urbansk8r231]

@@JurijsJutjajevs thanks man. That's a relieve. (1) Are those easy to prime? (2) What's the process?

[@Ethan-mw1qx]

What co2 regulator are you using for the big 60 or is it the nano? At 1:44

[@JurijsJutjajevs]

It’s the UNS Nano Regulator st 1:44 and it’s the nano tank. On the big 60 I have the old and trusty DENNERLE space regulator. Both are with build in solenoids

[@mahzi2499]

Thank you please make a video about different types of Lilypipes

[@JurijsJutjajevs]

Good idea

[@awardsentrant]

Nice. I've just bought some glassware and I was thinking about making the maintenance easier. Cheers fella 🙏

[@JurijsJutjajevs]

You welcome

[@AAaaaaqua]

ingenious ! doing this for sure

[@jtriple3636]

How to remove soil being onto sand? If you have good tip, plz let me know..

[@kratzeis1854]

J Triple Most of the Soil is magnetic! 🧲

[@jonydupre]

You can also use a fine enough comb which will get the soil, but lets the sand pass through 😁

[@JurijsJutjajevs]

Tweezers magnets and syphoning with a tiny hose

[@hhinojosareef1]

What is the smallest size they make..? Please help

[@AQUAGUYUK]

Love this idea

[@JurijsJutjajevs]

It’s handy, I love things like that

[@hzam78]

I have a canister with 16/22 hose dimension for my 60p. What will be the ideal combination for inflow to outflow jet pipes size? Should you have a bigger inflow size pipe or should you have a bigger outflow size pipe ?

[@madhatterjones4781]

Great question I am wondering the same thing

[@chriscoates564]

These are exactly what I needed thank you👍

[@JurijsJutjajevs]

you welcome Chris, 😉

[@terrywilliams5810]

Hi Juri, genius, the best ideas are always the simplest. I certainly know where a couple of those can go 🙄. Quick question, are the fish shop's open in your area on Monday's, my list is growing. Your home tanks are looking very nice indeed. 👌

[@JurijsJutjajevs]

Yes Monday is regular working day in Germany

[@T1702B]

Amazing my brother!!!!

[@JurijsJutjajevs]

hey brother

[@deborahmintonkirksey3307]

Can you add the links to these products somewhere please. I orders some online and the connection is a different sizes on opposite end and will not fit hose

[@JurijsJutjajevs]

links are in the description

[@puneetcool72]

Hi Jurijs, I have purchased Eheim 350 classic filter for my 40x30x30 cm tank and with this filter i have got double tap connectors too. Actually i want confirm that should i use this tabs for flow control boz the flow of 350 filter is to much for nano size aquarium.

[@HomeTheaterTurkey]

I have Oase biomaster thermo 600 , I can see it has got lots of oxygen bubbles in it and also slow then it suppose to be. Some people advice me to use Eheim those tap connectors. do you think it would help that ?

[@ChMEDAKA714HAMA]

It was a really cool video and I ’ll see you again👍🇯🇵😊

[@Dudelizious]

Hey jurijs, thanks for the pro-tip by the way, always nice to watch. Just one question as i am not using those quick connectors yet. I was always afraid they might reduce the flow. Can you confirm my worries or is there no recognizable influence?

[@JurijsJutjajevs]

No flow reduction, inside = same diameter as tubing

[@sunnydays1238]

Great video! Which co2 system did you end up changing to with this tank?

[@JurijsJutjajevs]

UNS Nano reg and a small refillable Aluminium bottle

[@welshweeks01]

Jurijs, a year on how are you finding the JBL ones, any leaks? I'm currently looking at the Eheim ones abut as you know they are significantly more expensive.

[@JurijsJutjajevs]

No problems so far, I have used them in other projects for stepping up or down between 13 and 17mm it’s very convenient if you want to use a 13mm outflow lilypipe on a filter made for a 17mm tubing

[@The_Robert.Fletcher]

Great I can make use of this. Thanks

[@mylkow]

Hello Jurijs, I would like to know how often U clean the cannister filter in small aquarium?

[@JurijsJutjajevs]

When I remember or notice reduced flow or I have algae issues

[@DeanR3]

I will be investing i some of these at some point as saves having to remove glass from pipe work👌

[@JurijsJutjajevs]

That’s true, and a good point for using them

[@bryang816]

What’s the background song?

[@monlegaspi]

Will this function as water flow controller as well? I have a sun sun filter withput flow control so im thinking of using this quick connector

[@JurijsJutjajevs]

Yes you can control the flow on the outflow side

[@monlegaspi]

@@JurijsJutjajevsawesome! Thank you so much for sharing your knowledge sir 👍🏻

[@madhatterjones4781]

Hi juriis I have a fluval Filter with 17mm hoses. Could I run 17mm hoses to connectors. Then 13mm hoses to 13mm lily pipes??? Would this put pressure on the filter and cause it to fail over time??

[@JurijsJutjajevs]

You could do this on the outflow, if you do it on the inflow this causes a permanent underpressure, which can result in filter sucking in air and start leaking

[@madhatterjones4781]

@@JurijsJutjajevs ok great thank you for the information

[@inessilva5936]

I saw Balazs using eheim tap in system maintenance to changed the water in your tank at home 🙂

[@JurijsJutjajevs]

Exactly, they are popular now

[@tomekmatysiak1313]

I was looking for such a solution to change the diameter of the tubing within the quick connector. It is a pity Eheim does not support the 12/16 to the 16/22. Unfortunately, the JBL solution is not yet available in stores. I hope it changes quickly. ;D

[@JurijsJutjajevs]

JBL solution is kinda brand new, it’s available through their website. You can check if they are shipping to your country

[@jdavids1332]

Can these connectors be used to control the outflow? My canister filter flow is too strong for my nano aquarium but I am using after market lily pipes that don’t have a control valve

[@JurijsJutjajevs]

Yea you can reduce the flow on the outflow side with these connectors. Never reduce flow on the inflow side

[@AthaxDesigns]

Does JBL sell 13mm sizes?

[@JurijsJutjajevs]

Yes they do, must be a link in the description

[@miroslavradev756]

ISTA Quick Release Double Tap connectors are another brand option as well

[@JurijsJutjajevs]

Are they plastic or metal?

[@dessindrawin5052]

Plastic

[@miroslavradev756]

@@JurijsJutjajevs Plastic. Are the JBL metal? The Eheim's are plastic I think.

[@vincesoya]

good ideal for this,thank you

[@ohthisguy]

My tank is a shallow, 8.8 gallon and what size filter do you recommend? It will be sitting on a stand instead of a desktop.

[@JurijsJutjajevs]

a small canister filter would be the best in imo. SuperJet Es-150, Eheim Classic 2211, Maybe Oase Filtosmart thermo100 if you need a build in heater

[@fishysnowman9082]

Nice Tip.

[@STORYDRIVESTUDIOS]

What’s up man, I will be getting two of them as I’m going to use the bio master which you know is 17mm and and I got 13mm glassware so they are smaller. I am hoping it will work out with flow and all. I’ll let you know!

[@JurijsJutjajevs]

And?

[@STORYDRIVESTUDIOS]

@@JurijsJutjajevs Still working getting everything together, all the filter and tubing is hooked up and ready to go.. need a few more parts for co2 then pick out my plants and i will be off..

[@STORYDRIVESTUDIOS]

Hey brother just an update. I have been using the changer from 22mm to 16mm and I have had no issues. It’s been working great and also makes cleaning my Lilly pipes so easy and smooth. Wish I could show you a pic of my Aquascape, it’s coming out great!

[@weeinspiration]

Where can you get the JBL double stopcock+quick coupling in USA?

[@JurijsJutjajevs]

I couldn’t find it in USA yet. Check the link in the description and if they ship directly to USA. If not, go to your LFS and request him to import for you.

[@1991watch]

Hey! I know you're the pro on these, I have them on my big filter, however I'm getting nano tank and want to control the flow rate. Think if I closed the taps a couple turns like the valve it would control flow rate? or would that cause issues with my canister filter. P.S. the canister does not have adjustable flow

[@JurijsJutjajevs]

You can adjust the flow on the outflow of your filter

[@1991watch]

@@JurijsJutjajevs ah its for my nano tank that's why haha so the small canister filters don't have flow adjustment so i'm looking for alternate solution, i'm think these quick release valves could do the trick?

[@JurijsJutjajevs]

Yes, use them to control flow on the outflow only, never on the inflow side as this will cause problems

[@1991watch]

@@JurijsJutjajevs amazing good to know, you solved the issue i was looking for! cheers!

[@khalehuu]

Is that Co2 diffuser placement the most prime spot for the spin flow lily pipe?

[@JurijsJutjajevs]

Best placement is right next to the spin pipe and slightly below the spin opening. It will suck in the Co2 bubbles into the spin and distribute them

[@khalehuu]

@@JurijsJutjajevs Thank you so much for the reply! Appreciate your time.

[@juristimma5366]

perfect idea Mate.....

[@aquariumjournal449]

Can these be purchased in the United States? Also great video, loved it!

[@JurijsJutjajevs]

Not yet. AND According to JBL support they couldn’t tell me an ETA. if you really want, order yours from JBL homepage or a european Webshop that ships to USA

[@dougtatz8904]

@@JurijsJutjajevs JBL only lists these for a wish list, can't as yet purchase them. Can you recommend a European website that does sell and ship to the U.S.

[@sugars205]

Are these ball valves?? Cos the look so... If that's the case, does anyone know the bore of the valve?? If your running 12, 16, 22mm ..etc.. tubing for a reason, this will most certainly have a restrictive effect??

[@x3thelast]

What size quick disconnect are you using for the 10mm spin pipe? I have the same filter. Thanks!

[@JurijsJutjajevs]

10mm pipe goes with 9/11 tubing ► 9/11 quick connector.

[@NelsonMarto]

thanks, good video

[@feldartillerie1620]

Is it also possible to adapt from 12/16 to 16/22 with the Eheim? I wanted to get a Biomaster 350 Thermo but my NeoFlow set is for 12/16 and would like to keep that. Since Oase only uses 16/22 I would have to switch to JBL connectors if Eheim doesn't work. Thx

[@JurijsJutjajevs]

Eheim works between 9/12 and 12/16, the JBL works between 12/16 and 16/22

[@feldartillerie1620]

@@JurijsJutjajevs Thx

[@jonahschwarzz]

Hi jurjs love your advice

[@JurijsJutjajevs]

thanks Jonah, what do you think about different size outflow?

[@jonahschwarzz]

@@JurijsJutjajevs I think it is an interesting concept but because I have only a 4 gallon 5n UNS and I will stock with CRS I have no need for such a strong flow. But when I eventually get a larger tank I want to boost the flow I will definitely use this trick. also, I know that you are very particular about your co2 systems but can you please do a video about sugar and yeast co2 system I know you have a lot to do and DIY is not your thing but please take a look at it. The king of DIY has a video about it.

[@Megatog615]

looking for something like this for 3/8" tubing(zoo med nano 10)

[@debjeetpandey2787]

We can't fined this in India, can you please help me out.

[@JurijsJutjajevs]

I couldn’t find it in the internet either. The product is brand new. You can talk to your local shop and ask them to import for you. Or check the link in the description - it will take you to JBL homepage and you have to check if they are shipping directly to customers from India

[@violiavimal4213]

Try the Qanvee Double Tap With Quick Coupling Aquarium Filter and see how it compares ;)

[@JurijsJutjajevs]

It looks very similar. Is there any difference?

[@violiavimal4213]

@@JurijsJutjajevs sorry i don't know but i like to find out ;) i most likely will purchase a pair there are 40 au each here in Australia

[@jspinosa50]

I use silicon grease on all O-rings, easy on easy off, and it prolongs the life of the O-rings.

[@JurijsJutjajevs]

Correct 👍

[@p.urrutia4563]

They're very handy! I just wish they weren't $40/pair Canada!

[@JurijsJutjajevs]

The new JBL ones are more affordable

[@danielmatias7175]

Where u get them for $40 a pair?

[@p.urrutia4563]

@@danielmatias7175 Haha. There's a store called Pisces Exotica Pet Emporium in Calgary, AB. It's also the ISTA brand which should be at least less than half the price!

[@richaxe3099]

This is a game changer Jurijs, thank you!

[@scapebeginner4540]

Great Video! But I think the music is a little bit to loud

[@adamblythe3169]

Hey, anyone help me out! I have a oase 600 thermo filter with a glass lily pipe and skimmer. Unfortunately for some reason the filter seem to powerful and is causing the skimmer to make nose on suction and sucking in bubble causing the filter to make noise. I’ve tried adjusting skimmer and removing air and keeping the pipe fully open at the bottom but no luck. I was thinking of a valve to reduce in take flow to the filter. Anyone know anything that would work or anything I can do to adjust flow on the 600 filter itself? Thanks 🙏

[@JurijsJutjajevs]

A valve on the outflow is a possible solution, never reduce flow on the Inflow as it will create vacuum in the filter. Another hack is to use a rubber band or a zip tie on the skimmer floater to prevent it being sucked down completely

[@justbaquatics2512]

Another great pro tip.... Keep tanking

[@user-cf3zh8tq9m]

I was more impressed by the beauty of the house....

[@JurijsJutjajevs]

Thanks mate „proud“

[@phuongkhanh8521]

Vietnam sub thank you.👍

[@optionmaster221]

YTB: "Turn off all from Jurijs Jutjajevs" Me: "click"

[@JurijsJutjajevs]

Thank you for your comment, really appreciate it

[@optionmaster221]

sorry but what do you expect when you get so specialized in plants and co2 and technical stuff. some of us come here cause YTB algorithm sniffs out our love for fish in aquariums and recommends your channel. naturally we are disappointed to find out it's not about that but about the underwater horticulture instead..

[@JurijsJutjajevs]

Thank you for the explanation. I’m sorry my content disappointed you

[@optionmaster221]

@@JurijsJutjajevs that is ok. I'm sure you are an expert in what you do. I was just being overly dramatic about it. sorry

[@MrVonguzoff]

I use this method

[@theunderwaternature]

Nice product but canister filter is still a dream for me

[@JurijsJutjajevs]

Have you ever considered to build one your self?

[@theunderwaternature]

@@JurijsJutjajevs yes i thought of building one but air tight vessel isn't available here and parts required of pvc pipes to build sealed canister isn't available too.

[@JurijsJutjajevs]

Ok int his case i don’t know what to recommend , sorry

[@theunderwaternature]

@@JurijsJutjajevs that's why i had onf flat one 60 cm hanging type, superjet es 300 v2 and co2art regulator as my 3 wishes. Since I already got the regulator i would like to change regulator with oase bio master 600 thermo. Even the products you have used or reviewed would work😜. So i can setup another real Clean looking high-tech tank.😄

[@edwiser]

Always use double tap connectors makes life easier.

[@DogStyleUA]

Аквы красивые)

[@gavinistheawesomest]

My ex threw all of my taps away, and I didn’t want to buy more, so I made my own from pvc pipes and fittings and made each one for about $3-$4 each

[@gillianduchardt3953]

Ich hab auch nichts besseres zu tun wie die Videos alle zu glubschen (um 1uhr und alle doppelt) 😂😂😅

[@JurijsJutjajevs]

Doppelt?

[@gillianduchardt3953]

@@JurijsJutjajevs ja dir videos alle nochmal zu schauen😂 genauso wie bei GarnelenTv da kann ich teilweise schon mitsprechen 😂 ich hab zu viel Langeweile 🥴

[@wiicando]

Bei 6.09 hängt ein Fisch an der Scheibe, was ist das für einer?

[@JurijsJutjajevs]

Rhinogobius guangxi

[@AquaGardenAquariums]

A little bit pricey I think...

[@JurijsJutjajevs]

they just got cheaper thanks JBL. in general you might be right, for a little bit of plastic its quite a lot of money

[@masterpeace7343]

I don't like the fact that you promote jbl one instead of eheim. Eheim connectors are on the market for so long and satisfied all aquarist around the world. Jbl just copy 'em. I have no problem with partners or sponsors but you can promote a product without criticize another. Friendly.

[@JurijsJutjajevs]

I’m using eheim connectors my self in the small desktop nano and other client aquarium. JBL connectors are new and because Eheim has been there before, doesn’t mean no one else can enter the market with a similar product. JBL not simply copied the connector from Eheim. The locking mechanism is different and you have a unique possibility to connect 13 to 17mm tubes which is not possible with Eheim connectors. On Eheim side this requires an adaptor. I haven said Eheim is bad, I actually like Eheim design over JBL, but JBL is more budget friendly. This is objective facts and my personal opinion. Now everyone can make his own opinion and decide what he wants

[@masterpeace7343]

@@JurijsJutjajevs you didn't say that you prefer eheim design in the video, you just say some negativ points on eheim one and promoted jbl one, that's it. Yeah it's a good thing for the connection and prices (even if you said "almost 2x more expensive... We are far from it... Anw) you right but saying that you can open the valve during the opening is a bit much.... a defect that you went to search far 😉

[@JurijsJutjajevs]

You are right, did say that in a different recording. I just rewatched the video and from my point of view it’s a fair comparison with slight focus on the JBL as it’s a new product and a budget friendly alternative. Eheim looks nicer and feels better when you hold with your hand and is also available in a larger range of different sizes. I should have added this to video, as I did in the description. If you have and use eheim valves, it’s all good. I didn’t want to promote JBL over eheim, simply introduce because they are new and show how and why I’m using mine.