SPEEDFIGHT MOPED CARB VARIATOR & FINISH UP PART 5 MARK SAVAGE

[@charlieoscar09]

Another top series of videos Mark.. Looking forward to the Jog ones starting...Thanks for taking the time to do this for us.

[@marksavage]

Glad you like them!

[@stephencresswell4760]

Another great vid. Can’t wait to get stuck into my Yamaha Neos again.

[@TheEasyeyes]

Very good,now my Speedfight rides again. Thanks Mark

[@marksavage]

Thats great bud , take care

[@richardshomemechanics5566]

Nice video mark very well explained I’ve just recently worked on some Peugeot scooters as per my videos unfortunately mr bodger had been there before me so I had to make good and put the scooters back to standard they now start on the button and even though mph has dropped they quite happily sit at 35-40 mph one was a 2T and one was a 4T also I live your humour on your videos keep up the good work 👍

[@marksavage]

Thanks bud and for watching

[@leontomkins3414]

Thanks to your videos my speedfight got through an mot after being sat for 7 years

[@marksavage]

that's great news bud, well done and thanks for watching

[@Bigwormox4]

Hi mark great video, the moped has come out very nice 👍 hope your all good fella 🤩

[@marksavage]

good to hear yours is all fine bud and yes we are all ok, stay safe bud

[@barneykennett9282]

Great video Mark, enjoyed the rants...😀👍

[@marksavage]

Thanks bud , take care

[@4x4quadbike]

Well done man... enjoyed the series...looking forward's to next one😀

[@marksavage]

Thanks bud and for watching Theres a few more coming

[@WildOn2sVlog]

Great series. Great job man.

[@marksavage]

Glad you enjoy it!, stay safe

[@2wm699]

good to see you mark can't wait to see the roxy

[@marksavage]

Thanks bud ,take care

[@Al3xisAE]

Awesome, good job saving another speedfight ✊🏻🛵

[@marksavage]

Thanks bud , take care

[@Hendaz89]

@@marksavage I have a speedfight 3 125cc my revs seem to be very low and cuts out when at traffic lights or junctions have you any ideas thanks in advance and keep up the awesome videos

[@jorda1k]

Super video Mark

[@marksavage]

Thanks bud , take care

[@lightmb8584]

Hello Mark, great video. I have a question, what are you referring when you took down the choke what can adjust?

[@marksavage]

when you take out the auto choke, if its not starting the best it can sometimes be the auto choke and this can be adjusted by screwing in or un screwing the lower part which will give you more or less choke and help towards the starting most of the time you would not have to play with it stay safe

[@mrchilled85]

nice one mate looks a lot better then it did at the start of part 1 :) when we getting the aerox on the go :D

[@marksavage]

The video will be out next Friday bud plus i had to do an update but this will be out after the V clic videos So 4 more in total to watch every friday As for the speedfight yes bud much better

[@varshkex]

What carburettor adjustment did you have at that time

[@marksavage]

Follow my carb videos bud Start from 3 half

[@varshkex]

@@marksavage ok ty

[@varshkex]

@@marksavage but is it 3 half turns of ilde or air screw?

[@marksavage]

@@varshkex follow video bud Idle just in Air mix

[@varshkex]

@@marksavage so 3half turns for air mix and 3half turns for idle screw?

[@dord1954]

Great job 👍

[@marksavage]

Thank you! Cheers!

[@p47thunderbolt68]

Just bought a used 49cc .Guy was fed up with it . He didn't realize letting it sit outside for the winter does to these things .I cleaned the fuel tank replaced carburetor. Runs like new . only had 1400 miles . Marc I know you hate cone type air filters . My problem is I've installed a 2 piece pipe and muffler exaust. Using factory airbox it misses a little .Running without filter it's much better . I'm I going to have to go with cone. Its doing about 74 KMH . Also replaced the variator weights .

[@marksavage]

Yes I do but sometimes you have to bud Have you tuned the carb , little more air might help ? But as long as you can keep it dry it will be fine

[@maxtienhooven3706]

Hi Mark, really enjoyed this series. I was wondering if you could give me some advice for the problem i have with my speedfight 2 (Air cooled). The problem Im having is that it loses power after driving for 1 minute or so, it just keeps going slower until it stops.

[@marksavage]

Hi bud well it could be q few things Plug breaking down ! Change Fuel filters! Change Carb needs a clean Float sticking ! Clean Blocked jets , clean Tuning which might help Or ! Stator coil going to earth , clean or change

[@maxtienhooven3706]

Hi Mark, thanks a lot for your response! I was hoping you could give me some tips on how to make my float not stick? mark savage

[@raivisvjaksa4686]

Hi Mark. I have a problem that when I drive my speedfight 2. And there where is the air filter for the carburetor. And on the bottom of the air filter box is like a small hole so when I'm driving. And a bit time later there's like the mix that's a bit dripping from the carburetor. I think that's because a bit gets in the like pipe that's in the air filter. Is that bad or what?

[@linihughes5106]

Hi Mark love the videos u do and I've learned a lot but I've a little problem with my Speedfight 2. When I start the bike up I let it tick over and once my auto choke goes off I set off but at first it's spluter then revs up and goes and when I'm sat at the train crossings it's ticking over nice but when I go to set off it starts splutering again the it's ok. The carb is a 12mm gurtner carb with a 60 main jet the needle is in the middle. I've fitted 6gram rollers along with a malossi double red sponge in my standard air box and a giannelli exhaust would u say I need a smaller or bigger main jet ?

[@marksavage]

This can be you fuel lines hard or not tight , pilot jet dirty , reeds causing this lag Even a faulty plug Take it you have tuned like in my video bud Take care

[@linihughes5106]

Hi Mark thanks for the reply and yes I've turned it like u said in your video. It as a new vacuum fuel tap New vacuum pipe New fuel pipe New spark plug-BR7HS Carb was stripped and cleaned like in your video New 6gram rollers New giannelli exhaust Lightend clutch bell New standard clutch but as red springs Standard clutch contra spring

[@marksavage]

@@linihughes5106 and it still doing it after all that I'd still say fueling Maybe try a 58 jet Or take off the link pipe ! It must be driving you mad ! Next have a look at the reeds

[@linihughes5106]

To be honest yes it is and I've removed the link pipe as u said u throw em away so I followed your advice and got rid I'll try some new reeds first if still no go I'll down jet to a 58 and let u no tomorrow if ok

[@marksavage]

Try it back with the link pipe bud I've had it like in my newest sp2 video !

[@motorbikeryda883]

Hi mark just wondered if you could help me out my speed fight 2 really struggles to go past 30 it’s got 6 gram rollers Leo vince tt exhaust and upjetted to a 68 it’s got a malossi sponge in the airbox and it’s got new carbon fibre reeds

[@ScozzieMan]

Hi Mark, Great Videos. Can you tell me what is the standard Carb for the speedfight 100cc 2006, as I suspect that the 1 I have is incorrect, I found out that the person who had it before me upgraded the piston to 125 but I have put it back to 100. Thanks in Advance...

[@marksavage]

to be honest bud if you have not got one you are not going to get one as they are very rare, your only going to find partner part ones on e bay which will take a lot of setting up if it runs ok at all, try text moped breakers or seller selling speedfight parts to see if they have one remember 50cc ones dont fit !!

[@ScozzieMan]

@@marksavage what size should it be mm wise so I know what to ask for and thanks. I can relate to your frustration at times, the more I dig the more I find things wrong... like the wrong kick start pedal grrrrrr

[@luk1z915]

Hi mark, great video as always 😀. And amm i have a little problem with my speedfight, so sometimes when i drive for less than a mile with almost full throttle it starts bogging, loses power, but when i release the throttle for 2-4 seconds it goes perfectly again.

[@marksavage]

This can be a few things Jet size Float problems Fuel lines Air mix Last service Plug, air filter

[@luk1z915]

@@marksavage okey i'll check that, and one more thing, is it worth to get a 17,5mm carb and a sport variator like malossi multivar?

[@marksavage]

Variator can help , carb ! If it starts and runs id leave it

[@4x4quadbike]

Hi mark.... do you recommend using polini grease or anything on the variator rollers. I just put new variator in scooter but 8 did use grease... wat do I think... thanks in advance 😀

[@marksavage]

As in all of my variator videos and there's loads lol Never use anything Just new dry roller and clean everything with clean cloths Make sure the variator is clean and the inner part too

[@t1dd355]

Great video, have you got any social media platforms I can contact you on about my speedfight 2?

[@marksavage]

sorry bud no but theres over 100 speedfight videos on my channel cover everything and will help type in mark savage speedfight and they will all come up some a bit old but helpful if you need anything after that just ask and ill try and help

[@breezyworld]

Hello do have a links for speedfight 3 125cc clutch and front fork

[@mopedboys6669]

Love what your doing mate will u put 6 grams on a 100cc

[@marksavage]

no they are heavier 8g to 10g I think , have you weighed your roller in there now? always worth doing but they do have to have more weight thanks bud and stat safe

[@mopedboys6669]

mark savage no I haven’t mate but will do when I get Round to changing them

[@TM-rx6qk]

Hello. Do you know if there is any restrictions in a speedfight 2 exhaust that i could remove to save on buying a aftermarket one?

[@marksavage]

no bud its a sports exhaust and that the only way, they are cheap and they make a big difference you dont always need an upjet either

[@wrightys1]

Hi Mark. Peugeot tweet 50cc 4 stroke. Is it a simple washer that restricts it to 28mph. Anthony

[@marksavage]

It's a 4t so no bud a lot of these really will only go 30mph However Clean variator , new rollers Small upjet and tune Take out and carb restrictors And if you can get a sports exhaust This will all help to get more out of it

[@wrightys1]

Thanks Mark for the quick reply. Valuable information. Thanks again.@@marksavage

[@motorbikeryda883]

Hi mark just a quick question do you know if the original cdi boxes on the speed fight 2 immobilesed version are restricted

[@marksavage]

No bud mk3 was the start

[@pedshed5132]

Hi mark, got another speedfight question I was out driving my scooter pretty hard and going down a hill i felt a bang. From then on, my scooter cannot reach over 20mph. The bike still starts fine, and revs happily on its stand and from immediate pull away, but whenever I plant the throttle it slows right down to tick over and will not accelerate. I’ve checked my variator, and my gearbox seems undamaged, so is it likely that my clutch has slipped and needs replacing?

[@marksavage]

odd but would be going over it defo , could of been a back fire guessing lol start over so variator off check roller clean and change clutch hand test as in my videos clean carb service so plug and air filter ] see how you get on

[@pedshed5132]

@@marksavage I can notice some slight score marks on my clutch bell and some bluing on the metal. My driven pulley is also definitely out of round. Could this be causing the problem? What concerns me is that if my clutch was slipping, why would my engine bog down when I open the throttle? Its become pretty difficult to start, the tick over is high and the rpms take a while to settle down when I lift off the gas. Blown crank seal perhaps?

[@pedshed5132]

If I had a bad crank seal, wouldn’t this also explain a backfire due to an extra lean condition?

[@frankiefone6259]

Hi mark got a question what colour is the immobiliser wire on the cdi unit and can u cut it as its preventing me from starting my bike

[@marksavage]

The cdi units with immob also have a key detection so its not a wire you can cut thing Bud , if no spark its a new cdi and key or if you can get one a bypass unit

[@frankiefone6259]

Alright thanks mark just ordered a bypass unit

[@motorbikeryda883]

Hi mark just wondered if you could point me in the right direction with my speed fight 2 was on the stand running mint I cut it out came back to start it and it wouldn’t start I eventually got it started but it would only idle wouldn’t Rev at all it’s had new carb fresh fuel new spark plug the carb has a 62 jet in it the bike has left me really stumped I can’t find what’s causing the problem

[@marksavage]

they do this and as in my videos all 80 of them on speedfights it can drive you mad !! its got to be from the start spark nice and blue wet hand test wet plug it could be from piston failure and yes they can just go like that reeds , carb cdi etc try the basics and see how you get on

[@motorbikeryda883]

mark savage cheers for the reply mark managed to get it back running the spark plug cap wasn’t on properly but now it’s gone back to not reving I think it’s an electrical issue but I’m just not sure what electrical issue it could be everything mechanical seems fine to me but it seems to me like it’s not getting enough spark at high rpms but this is where it stumps me because sometimes I can turn the bike on and it will be fine then it will just go back to how it is right now just only idling

[@motorbikeryda883]

mark savage update managed to find a loose wire causing the issue by any chance do you know how to wire up a 4 pin starter relay for my electric start to work

[@viktorchornyy243]

Hi Mark, i have a speedfight 2 with 8 Pim CDI dellorto, can u modificate this to put a rotor with normal CDI? LOVE you videos, but i don't undarstand english 😅

[@marksavage]

no you cant not without changing the loom too, they are not immob ones so you dont need to nor is it restricted watch my cdi video to see which one you have bud and English thank god for google translator and subtitles lol

[@viktorchornyy243]

@@marksavage thanks, and which versión is better? With 8 pin CDI or another

[@viktorchornyy243]

I have bought a complete electrical system from speedfight with other cdi

[@marksavage]

So how does it run bud I don't mess with the electrics More cvt and engine On the sp1 and 2 the cdi works unrestricted On the sp3 and 4 is when you have to play with them

[@callumrowley6915]

He mate I've got a peugot speedfight 50cc 2 stroke and it was running when I went to buy it and on the way home it cut out now it wont start it has fuel, air, spark and a bit of compression any ideas to get it running thanks mate

[@marksavage]

this happens a lot bud and the last owner knows it and sold it like it, have you contacted them as you do have buyers rights even private id bring it back but if not i have many videos on them type in speedfight mark savage they will come up or a have another channel where they are all on a play list but it could be piston but follow my videos with wet hand test , etc

[@pedshed5132]

hello mark, i saw a video on youtube of a piaggio zip being converted from air cooling to water cooling. would this be possible on a speedfight 2 if i wanted to improve cooling and power?

[@marksavage]

no this cant not be done on the speedfight engine due to the placement of the crank in the engine, LC are faster so maybe change the whole engine might be the way forward bud

[@pedshed5132]

@@marksavage hi mark me again I’ve come back to this idea of a liquid cooled swap and bearing in mind your advice I believe that it may be possible to use a liquid cooled cylinder on an air cooled case. I’ve studied my own cases and compared them to cases on a liquid cooled model that uses a mechanical oil pump - the dimensions and designations show they are identical. Surely, then, my case could function with a liquid cooled top end? I would like to say I really appreciate your free advice and that I trust your experience, having worked on these scoots for years. However, I just don’t see why this wouldn’t be possible.

[@marksavage]

@@pedshed5132 ok give it a go bud ,thats all i can say . replace the air fan with a water pump and connect a radiator , the blue plug is for the top that will show the water temp best of luck bud lets know how it goes

[@dwr-cchs7724]

Hi, I've found a Carb but it's not including the right-angled oil pipe attachment do you know where I could get one? Or maybe you have one?

[@marksavage]

I don't bud sorry but eBay or fb sales

[@dwr-cchs7724]

@@marksavage OK thank you for the help :)

[@motorbikeryda883]

Hi mark just got a quick question for you my speed fight 2 runs mint but it seems to be going through spark plugs a lot do you know the reason why it would be doing this or do you know a good brand of spark plug currently using a ngk

[@marksavage]

They are one of the best and a brand I use So what is it doing to them ?? Black , white colour Fouling then With what deposits Burning them out ?

[@motorbikeryda883]

mark savage every time it blows a plug it’s always black

[@marksavage]

@Jake Rides black is rich or burning if crap on it Poss stator coil , volt reg or ht coil / lead

[@motorbikeryda883]

mark savage managed to sort it it wasn’t getting enough air

[@Riddle6EOS]

Do you have the 100cc variant in the United kingdom? Would like to see one of those under the knife! 🛵

[@marksavage]

I had a few of them but they dont sell well and part are very hard to get hold of so I stay away unless they are cheap lol , thanks for watching

[@Riddle6EOS]

@@marksavage Any time! I love watching your moped videos! Good stuff! 🛵🛵

[@raivisvjaksa4686]

Hi mark, i have A question. How do i empty my gas tank on my speed fight 2 AC 2004? I know that you have to put the hose that goes to carburetor like in A can so the gas would go in there but theres no thing coming out of that hose. Do i have to blow air in to the other hose that goes like in intake manifold or how?

[@marksavage]

Fuel goes into the vacuum Then out in to the carb The goes to the manifold Sick to prime carb then on manifold

[@raivisvjaksa4686]

@@marksavage ok thanks. But i have another question. I recently Made my gas tank together with oil. Like i mix gas and oil by myself (pre mix). But i took out all the hoses from oil pump and unplugged it. But now theres A Red flashing like the oil lamp on the speedometer. Is it because i unplugged the oil pump? And what do i do to stop the Red oil lamp flashing?

[@marksavage]

@@raivisvjaksa4686 it is and if you are going to pre mix you will have to live with it or take the bulb out Easy to do like in my videos with taking the clock off

[@raivisvjaksa4686]

@@marksavage yeah i thought of that idea too. Thanks

[@raivisvjaksa4686]

Hi, Mark. Do you know how much diameter is needed for angel Eyes on speedfight 2 2004? Because i've heard that its 60 mm. But is it 60 mm for both headlights? And is it relly complicated to wire them?

[@marksavage]

The evo head light? They are just kitchen bulbs If so go led bulbs They are great but won't pass a UK mot

[@raivisvjaksa4686]

@@marksavage no i think the actual angel Eyes. Like the circle ones?

[@marksavage]

@@raivisvjaksa4686 oh right They must be new Just wire borh to the main beam

[@raivisvjaksa4686]

Hi Mark. I have speedfight 2 2004 AC. And is it normal that with full gas tank I can drive about 100km? And I have all original parts on.

[@marksavage]

It does come down to how you ride it and top speed!! If restricted to 30 mph then that's not the best but only small tanks and a lot better than a car !

[@ryancarrington6064]

Hi mark got a speedfight 100 will tick over any throttle and she cuts out, doesn’t have original carb can’t quite work out the model, can’t quiet work out how to get the jet needle out of the slide lol.. I’ve took carb bowl off and it’s running a 95 main jet couldn’t tell you what notch on jet needle the old guy I brought it off said oil pump issue so I blanked off the pipes to that and premix today whilst messing with carb bloody starter packed up haha, any suggestions mate?

[@ryancarrington6064]

Oh and an aftermarket air filter was like it when brought lol

[@marksavage]

@@ryancarrington6064 try and get a speedfight carb bud otherwise your in a world of trying to set up But if Chinese carb the air mix should be all the way in not 3 half Air filter wrong too . You'll never set it up right bud

[@ryancarrington6064]

@@marksavage do you have any parts squirrelled away?

[@ryancarrington6064]

wouldn’t mind putting standard air box back on

[@marksavage]

@@ryancarrington6064 I just looked lol Only 50cc bits bud as 100cc were hard to get hold of and that was 5 years ago I only did a few as they didn't sell very well to be honest The 50cc I couldn't get them fast enough! Maybe try some sellers or breaking and ask them

[@njoymusic6911]

Hi mark. Do you have a video on where you show how to fix brakes on speedfight? Because they are shitty! Is there a trick for speedfight? Thank you

[@marksavage]

Hi bud If you type in speedfight brakes mark savage , the front and rear brake videos come up plus one on sticking brakes There are over 100 speedfight videos on every thing that you need

[@njoymusic6911]

@@marksavage I have searched but I can't find any video where you bleed brakes on speedfight. I have only found one video with speedfight brakes but my speedfight is on disc. Can you put me a link ? Thank you for your time. And sorry for my bad English! God bless you.

[@paulwood7221]

Hi mark can I fit a 125 in a Peugeot speed fighter3 it is a 50cc in there at the minute thanks mate

[@marksavage]

The sp3 made both engines so yes bud I've done both sp2 50 to 100cc and on the sp3 but you have to change everything Clocks and cdi exhaust etc The cdi is the main part as this is the restrictor !

[@paulwood7221]

Thanks mate

[@paulwood7221]

mark savage do I need to change the Wiring loom to

[@tonysmith3]

Hi mark. I've got a oil leak. I think it's coming from the air filter box. Do you know what it could be?

[@marksavage]

All 2t can get oil come back into the air box Take off clean or replace the filter New plug A tune and use good quality 2t oil bud

[@tonysmith3]

@@marksavage thanks for your reply. I will do what you have suggested. What do you mean by A tune?

[@marksavage]

@@tonysmith3 as in my 2t carb tune videos It show you how to do it I have many videos on all mopeds on my channel bud

[@tonysmith3]

@@marksavage ok I will check them out bud

[@garrybooker5871]

Hi mark can you please help me I cannot find the indicator relay on a speed fighter 3 please help

[@marksavage]

Sure its in the clocks !! If not under seat at rear !

[@mikemiles3068]

Great video❗️no where could you find a service shop that would do this kind service❗️You have to do yourself if you want it done this good✅👍🛵

[@marksavage]

Very true bud Thanks and thanks for watching Take care

[@davesbikestouringandmuckin7759]

Hi Mark hope you can help, i have Peugeot Speedfight Ice 125cc 4 Stroke, it has all of a sudden started to bog down it does not want to rev over 4/5k rpm. It just started mid ride at a junction and i had crawl all the way home. Have stripped and cleaned carb, changed CDI, coil and fitted new plug, still the same, has anybody had the same problem and know a cure ?

[@marksavage]

In this poor wet weather the filter can clog up and will need changing Plug can get water on it Clean and dry off ht lead wd40 after Fuel lines become hard or split Check and change Oil ok ? Cdi and connectors all ok Wd40 them

[@robertholliday9133]

Hi mark I have a speedfighter that I've put a new engine in but there is a red/black wire on bike which I can't find on new engine and I'm not getting a spark I'm local in yarmouth and would appreciate your help and skills pls thanks rob

[@marksavage]

Thats a immob loom so you need an immob engine bud ! You can change the stator coil or the loom and cdi This is why you have no spark bud

[@robertholliday9133]

Thanks mark appreciate the info bud,gret videos helped me loads keep up the good work mate.

[@muratzecic8837]

What do I do when my moped puts too much oil in the fuel.

[@marksavage]

pre mix or pump?

[@muratzecic8837]

@@marksavage premix I put much oil in the fuel

[@muratzecic8837]

@@marksavage it slowly choked itself off I emptied all the fuel and put a better mix in it but it still doesn't start

[@marksavage]

@@muratzecic8837 oh id pre mix until it comes through but as it wasn't working you may have damaged the piston if it was running without 2t oil ! this is the common result for seized engines or damaged pistons

[@muratzecic8837]

@@marksavage thanks mate.

[@keithkendal257]

Spare parts for a 2016 Peugeot speed fighter 4 total sport

[@marksavage]

Just sold my one for parts £180 the whole ped!

[@paulbudford]

That's really strange how they modified the crank. I guess it must of been done in the bike. Otherwise you would just change the crank, if you split the cases. Another aerox, like them. 😁

[@marksavage]

yes this is what I thought, was it easier than changing the crank, I guess but a lo of messing however it worked !!

[@radzwolski8710]

Can u fix my speedfight2 100cc

[@marksavage]

I have over 75 speedfight videos on my channel but that really will help you get back on the road Most of the 50cc stuff is the same to the 100cc bud

[@radzwolski8710]

mark savage so the no ghance u could fix my bike i ll pay how much u need the bike dont want to start and It bugs out

[@marksavage]

@@radzwolski8710 sorry mate I don't do that Its just a hobby that I do to help others fix theres

[@radzwolski8710]

mark savage oh okay i ll have to watch ur videos and try do it my self thanks

[@zahe_one]

hey mate.. i wish i can send you a private message.. i need your help .. with a speedfight 2 .. i can`t find a proper person to repair mine .. is working.. but i want to make it work better then it runs now .. on the hill .. it goes under 30Mph.. and i hate that .. so many cars gather behind me ..