VW T4 FULL POWERFLEX INSTALL

Рет қаралды 2,015

SpeedingTube

Күн бұрын

Пікірлер: 32

@twin40dave 7 ай бұрын

Nice work Tom , great to see Autostyl in there, 😊too

@SpeedingTube 7 ай бұрын

Thanks Dave 😎👍

@T4TipsGuides 7 ай бұрын

Sounds like the van is never going to stop evolving, and why not. You'll be keeping us entertained for years to come. Eventually Leo will take over and it will just keep going. 😂 You made getting those bushes out look easy. I've seen others really struggle getting the sleeve out. Good to see Autostyl have come up with a weld in solution for those mounting brackets. I see they also fabricate the reinforcement plates for where the upper part of the rear shocks mount. Mine has gone on the offside, so good to know there is a ready fix.

@SpeedingTube 7 ай бұрын

Yeah, it’s a fun platform to keep pushing as it’s all new/custom and different with each challenge. Leo wants an Impreza or Supra, so in 5 years we’ll start looking for a “project” car that he can fix up. I’m so lucky to have Autostyl just down the road, great place to help out and in return learn skills. Plus Ant is a top chap with good banter.

@jamieboness6363 7 ай бұрын

I did all of mine on the front 👍 just saving the pennies for the rears

@SpeedingTube 7 ай бұрын

It’s going to be interesting to drive again now with everything done. Hoping I can get the rears facing forwards and add a bit of camber. It’s going to be fun getting it set up

@llisntcoolj2375 7 ай бұрын

When they say t4s are money pits👀🤣🤣 class as always

@SpeedingTube 7 ай бұрын

For any better halves watching, all T4 bits cost just £10 & it’s 2 for 1 😊😂

@Chester1975 7 ай бұрын

That’s gonna be a belter of a van 😎🤙

@SpeedingTube 7 ай бұрын

Thanks 😎👍

@adamtibbetts7257 7 ай бұрын

Looks awesome mate. Great work. can't wait to see her back on the road!

@CraigRose953 7 ай бұрын

Great video Tom, Can't wait to see it back on the road 💨

@SpeedingTube 7 ай бұрын

Thanks Craig! Look forward to seeing yours out too! 😎👍

@T4TipsGuides 6 ай бұрын

Did you use brush on Hammerite to paint the control arms as well, or something else? I'm making a start on my lower arms today. Had the poly bushes for a couple of years. Just picked up a blowtorch and some gas and ordered a cheap reciprocating saw from eBay. I wasn't looking forward to this job as I don't have a press, but you have inspired me. Hopefully, it is as straightforward as you made it look. 🤞

@SpeedingTube 6 ай бұрын

Yes, melt them out, wire brush/blast, then paint or spray Hammerite on, then just put the new ones in! Let me know how you got on mate 😎👍

@T4TipsGuides 6 ай бұрын

@SpeedingTube Thanks. All done! I now see one pair of sleeves are already in two halves, quick tap with a hammer and screwdriver, and they are out. The other pair I followed your example. The reciprocating saw hasn't arrived, so I used a large hacksaw to cut through and release the pressure. Just need to drop them in at the sandblasting place up the road. These are the original VW arms. They were taken off about 4 years ago. The replacements have only done 10k miles. The N/S/F lower rear bush has split. Sounds terrible. It was always my intention to polybush the van so I''ve got the full kit ready to go on, along with new discs, pads, calipers, backing plates, brake hoses, steering knuckles, wheel bearings, hubs, shock absorbers. I've been hoarding 😂 I'd love to drop the subframe, but not an option right now. Thanks again for this video. I was dreading removing those bushes and sleeves. Thanks to this video, it only took about an hour. 👍

@SpeedingTube 6 ай бұрын

@@T4TipsGuides Awesome, glad the video helped mate 👍

@andrewmoxey5673 7 ай бұрын

Hi, I've been watching your videos, and im at the stage where we need a new engine. Do you sell the fitting kit for the 1.8 20v, as shown in your decimal tenths video ?

@SpeedingTube 7 ай бұрын

Yes, as mentioned in this video we’re finalising a few little bits. My kit is aimed at performance based users so will come with a custom baffled sump. That’s the final piece of the puzzle we’re working on right now 😎👍

@andrewmoxey5673 7 ай бұрын

@@SpeedingTube Thanks so what will be available in the kit .... all the mounting plates and stuff.

@SpeedingTube 7 ай бұрын

@@andrewmoxey5673Yes, complete solution. Even the clutch line. Baffled sump etc. I’ll be launching a group buy later this year.

@andrewmoxey5673 7 ай бұрын

Brilliant, how would i find out about the launch date?

@SpeedingTube 7 ай бұрын

@@andrewmoxey5673 It will all be launched on here. A group buy is the best way as it will keep costs down for everyone and I’ll set up a members group for everyone to assist/setup etc.