SpeedyBee F405 Wing Mini Easy Fly

[@CapnBry]

Excited to see the wing FC category still getting love. Seems like everything I use in the full size plus a camera switcher in a smaller package and lower price. Nice

[@scottyh72]

Only 5v BEC for vtx. Otherwise vbat. Camera switcher only works for analog.

[@CapnBry]

@@scottyh72 😆 oh you've seen a lot of other FCs with digital camera switchers? Also won't most digital VTXes take 6S voltage? Is a dedicated vtx step down even needed on a low noise fixed wing?

[@scottyh72]

@CapnBry cool your jets Cap'n. Just providing info.

[@AerialWaviator]

Nice unboxing review. It's great that SpeedyBee App already supports INAV 7.x at launch. The connectors on this mini-FC is a great idea, as it saves frustration of soldering wires to micro-pads.

[@RubyS.1]

I bought one accidentally thinking it was the larger version. Was pleasantly surprised actually a better setup

[@RubyS.1]

@user-otzlixr defiance rc

[@amarkentwell2866]

Great little board. A real shame its missing the User1 HD VTX power switch. Why do most of these manufacturers choose to omit this feature and add the User2 camera switcher for analogue?? Who uses that anymore now days.

[@typxxilps]

I like the whole idea of the packaging and what you get out of the box, even such coloured papers. I had bought 4 of these F405 wing last year when the rumors came up that china would limit the sale of drone parts back then. But I got all of them which meant in total 20 for the holiday camp with the kids which loved them a lot. Not sure if I would need a mini for my wings which usually offer quite a lot of space. But I guess I will get one just to play around and compare them. But we have only used these with iNav, never got in touch with ardupilot so far. Nice documentation too.

[@dronepilot260rc]

Reminds me of the Sparrow 3 OSD but much more advanced and for the same cost 🎉 Speedybee is going to overtake matek if they haven’t already

[@catmanfpv9213]

Oh man, i just bought the bigger one yesterday and maiden today. Looks like I should build another one with this one.

[@Livinglifeat60]

As soon as they are available I will order one.

[@AndrewNewton]

Release time is 18:00 GMT+8

[@EnglishTurbines]

Speedy Bee have done it again...What a packed little package....I was hoping that the base "Mounting board" would have screw holes so we can screw the FC to the plane, alas, no....Double sided tape is for heathans....🤔😳🇬🇧

[@narr0wm1nd49]

The matek f405 wmn has camera switching. This looks to be a direct competitor. The biggest difference being the wireless support for configuring and plugs instead of through hole solder.

[@TMacDo243]

Matek is trash. I got a bad board and when I tried to submit a warranty they ran me in circles and eventually told me to switch out my receiver and servos... I tested them prior... it was ridiculous. Will never buy a matek ever again.

[@j3fron]

Definetly gonna buy 1

[@kevalinopicks5555]

Ordered mine! 😀

[@bdyoliver7751]

@AndrewNewton I can take that for zohd talon gt rebel? Thanks dude

[@HermyH66]

I think analog rssi is still valid for everyone using FrSky R9 systems. Nice little board btw., AtomRC has something similar.

[@kjsj2304]

Hi Andrew You are great in explaining the specs of the products and the pinouts , connection with the App was awesome. Requesting you to make a INAV fixed wing video using this FC . Can this be used to make a VTOL wing with quad motors for VTOL and a dedicated motor for the wing and if possible kindly make a video of schematic settings for VTOL as you have explained in later part of this video . Regards

[@AndrewNewton]

INAV setup on a Penguin coming soon. But VTOL is beyond my knowledge sorry.

[@theinnocent714]

Hi, is there enough power for the 03 air unit via hd system plugin without bridging anything? Currently rebuilding a small wing that had analog n the old f411 se board. Ran across this video n saw the voltage bridging which i didnt realize was available, mayb i shouldve read the whole manual instead of just looking at wiring diagram😊

[@AndrewNewton]

VTx power is Vv which is your battery voltage so there is plenty of power. There is no BEC for the VTx on the SB F405 Wing Mini

[@TheCatFather01]

So cool

[@emmanuelsab1095]

Andrew, can you tell me if we can connect a led bar + buzzer on this FC, i m not sure we can do it. best regards

[@AndrewNewton]

Not sure sorry. These guys might know facebook.com/groups/INAVFixedWing

[@wezob4569]

Good day Mr Newton. With respect to the speedybee f405 wing mini, I have a VTX which can take battery voltage 7-20v But a camera which only takes 5-12v. I'm confused as to whether or not my camera is compatible or whether any pads need to be soldered. Your advice and assistance would be appreciated.

[@AndrewNewton]

Ah yes, that's tricky. Connect the camera voltage wire to any 5V pin

[@alexherrera3918]

Is the a simpler flight controller and not very expensive for an airplane application with just 4 channels, i just want wind mitigation and autolevel. thanks

[@AndrewNewton]

Can do that if you just ignore the GPS stuff. Might be a good video subject.

[@alexherrera3918]

@@AndrewNewton oK thanks. I have a Radiomaste boxer with 4in1 internal module. Fly just small 800mm foam planes , line of sight and not FPV. So far i have used Radiolink Byme A and required a Sbus receiver, works but angles can not be adjusted. And support or information is not much , so answer any questions. I have also used a second hand Spektrum AR631, expensive $60-70. I can be programes with the radio without the need of a PC. I have also purchsed a Lemon stabilizer, it is also capable of flight pack voltage/current telemetry but it does not do autolevel. I am looking forward for your next video. Thanks again

[@gbraadnl]

I am confused about the Flight Controller information on the Ardupilot website; they say the RC input for the autopilot on RX2 will connect to a timer instead of a UART, which should mean PPM is supported... right? Also, would this support Ardurover? The previously available Wing is... so I hope so...

[@AndrewNewton]

According to the manual SBUS / PPM can be used on RX2. No reason why rover wouldn't be supported.

[@cbfsoar15]

will fbus work on this board , i tried no luck

[@AndrewNewton]

Unfortunately F405 boards usually don't support FBUS

[@cbfsoar15]

@@AndrewNewton thank You

[@moriwaky]

still not on their website! you are fastest than they producing the boards Andrew!

[@AndrewNewton]

SB said it will go live Feb 12th GMT+8 18:00 GMT+8, but they said my review could go up at any time.

[@CrowDownEast]

Link is a 404. Video out before release??

[@AndrewNewton]

SB said it will go live Feb 12th GMT+8 18:00 GMT+8, but they said my review could go up at any time.

[@EleanorPeterson]

Good grief. "I remember when this hobby was all fields, you know..." 🤭

[@jas-FPV]

Someone jumped the gun ? 😊

[@AndrewNewton]

SB said it will go live Feb 12th GMT+8 18:00 GMT+8, but they said my review could go up at any time.

[@TMacDo243]

You completely skipped over the most important part... the wiring of VTXs!! Would have been nice if it was a video similar to your regular speedybee f405 wing video... :(

[@AndrewNewton]

Great feedback in your other comment thanks. I can see why using the solder pads instead of the sockets would be confusing. Looks like the Analog and Digital FPV pads are not in logical positions. Just know that the Digital VTx needs a UART connection for the OSD, and Tx connects to Rx etc. UART5 T5 and R5 would be the usual choice. Vv and G for power. Then you would choose MSP DisplayPort for UART5 in INAV.

[@TMacDo243]

@AndrewNewton lol it was the msp display port toggle switch I forgot... but yes, I your it helps. Some of us need it very dumbed down. Ahaha!! Anyways, thanks again for your response and all your great videos. You're awesome!

[@lasersbee]

Heads Up Andrew... You link to the 405 Wing shows "404 Error"

[@AndrewNewton]

SB said it will go live Feb 12th GMT+8 18:00 GMT+8, but they said my review could go up at any time.