SpeedyBee Mario 5 Pro DC Build for My 500 Subs!

[@juanyi9818]

Hello, im building the same frame now and ur video is definitely come in handy for me. Im planning to place the GPS at front, either gopro mount area or front arm. Just wonder will ur gps signal got blocked by the battery pack when its flying forwad (which the quad tilt 30~40deg)?

[@fpvinprogress]

Hi mate, I had a few flight test and can say that the gps signal is rock solid, no interference at all even when flying forward

[@DinShardi]

nice build

[@fpvinprogress]

Thanks a lot mate👍

[@samidemir2786]

Hello, is there a link to the 3D print printing of the GPS mount on the front?

[@fpvinprogress]

Yes in the video description of the video, you will find the link

[@RCkomar]

Hi, what is the capacity of your battery pack? How long you can flight on it?

[@fpvinprogress]

I’ve used up to 1850mah and got around 9/10mins flight time cruising around

[@RCkomar]

@@fpvinprogress Oh man… is that 6s istn it? How many C? I am building my first Mario and I thought that 1300 mAh 6s 100C is enough… Maybe I should change plans about battery 😅hahah

[@fpvinprogress]

@@RCkomar you can also fly it with the 1300mah battery, I also do since I have got 4 of the 1300 and only 1 of 1850. Obviously using the 1300mah get less flight time but since the drone is less heavy it flies better

[@akashdeeplakra3583]

Congrats 🎉 now do a giveaway please 😅😅

[@fpvinprogress]

Thanks🙏

[@betaodrone]

Hello friend, can you tell me how I can configure the speedyBee Mário LEDs in betaflight

[@fpvinprogress]

Of course my friend. So go in betaflight leds tab and click on WIRE ORDERING MODE. Then in the grid, click the boxes one at the time making two lines of 4 boxes each. Then by holding ctrl key on your keyboard, select all boxes you have activated. Once done on the right side of the grid you can select the functions. I usually select Arm state as function, then at the bottom where special colour is, you will see disarmed and armed buttons, here you can assign a colour for when the drone is disarmed and another colour when the drone is armed. Then you can add as color modifier the LARSON SCANNER, so you can have the colour moving rather than stationary. Once you are done click on save. Now I use the speedybee f405 v4 as flight controller and the colour of the LEDs are controlled by speedybee led mode, if I want to switch over betaflight LEDs then I just need to press and hold the boot button on fc, after power up the drone. Hopefully it helps you bro. If for some reason you can’t make it, let me know and I’ll make a video for it

[@betaodrone]

@@fpvinprogress Thank you brother write to me on your channel your videos are very special

[@fpvinprogress]

Thanks brotha, let me know how you go with that and thanks for supporting my channel 🙏

[@betaodrone]

​@@fpvinprogressfriend, if I don't want to use the LEDs in the beta, I just solder them to the 5v and g and d already work

[@fpvinprogress]

It depends on what flight controller you have on board. What fc are you using on your mario 5?