The PRICE is right (Sub $40)! But is the design? SpeedyBee Mario 5 DC Frame Assembly and Review

Another budget frame contender has entered the ring at around $35! Overall, it's probably not a bad option for the money. I'll show you how to assemble the SpeedyBee Mario 5 (advanced version) DC (dead cat) 5" FPV drone frame, and share my thoughts along the way.
Check it out here: www.speedybee.com/speedybee-m...
Full disclosure: SpeedyBee sent me this frame for the review at no cost and I'm keeping it. They did not direct my speech in any way, and my opinions are my own.
P.S. How did the audio sound on this video? Let me know. To me, there were a lot of fluctuations with the audio levels. I will be figuring out a better setup. Thanks.
00:00 BLUF
1:11 Bottom Plate and arms
6:32 Rear accessories
8:17 Head assembly
11:59 Joining head and body
16:18 Accessories, options, features
19:10 GoPro mount issue
20:53 the capacitor hole
23:40 Battery strap issue
24:54 Weight
----------------
🧠 FREE RESOURCES, 3D Printable Designs, and more for FPV Drones, RC Aircraft & 3D Printing at rcwithadam.com/
Want to support RCwithAdam? ↴
KO-FI: ko-fi.com/rcwithadam
OR
PATREON: / rcwithadam
Thanks!
-------
Mandatory Affiliate Disclaimer:
Any links in this description may be affiliate links, which means I make a very small commission (at no additional cost to you) when you make a purchase through that link.
*DISCLAIMER: Remember to always use caution and your best judgement when building and flying RC aircraft, and when working with 3D printers, electronics, or electrical devices. Be mindful of the laws, regulations, and best practices for your particular location. Be a good neighbor, and HAVE FUN!*
-----------
About RCwithAdam: Adam's goal is to HELP YOU build your skills and eliminate frustration and confusion through creative, educational, and encouraging videos featuring Radio Control airplanes, FPV drones, electronics, and 3D printing!
#RCwithAdam

[@nugrostv4600]

I plan to built this mario DC also ... thanks for sharing

[@RCwithAdam1]

Glad I could help

[@RCwithAdam1]

How did the audio sound on this video? Let me know. To me, there were a lot of fluctuations with the audio levels. I will be figuring out a better setup. Thanks.

[@mikehar2210]

It's designed for top mount battery.

[@Binkoro]

Good assembly video! Will have to figure out how the receiver is mounted onto the frame so that the LEDs can be viewed from the bottom cutout in the back.

[@BobCollins42]

What electric screwdriver are you using? Do you recommend it?

[@RCwithAdam1]

It is the Wowstick. I don't recommend it. It has very bad ergonomics and is not powerful enough for me.

[@originafreerangechicken]

@@RCwithAdam1 I have the same driver and concur with your statement.