I Needed A Larger MACHINE....But What Brand??

Check out Weigh-Safe products. They have a wide variety of towing products that will fit your needs.
Use this link to save 15% : www.weigh-safe...
**Be sure to check out BobcatofDaviessCounty.com and make sure to mention Spicer Designs for some possible savings.
Bobcat Of Davies County
16 S 316 E
Washington, IN 47501
[phone]
After owning two smaller Chinese excavators I realized the value of having one on the property. I was in need of something just a little bit larger so I decided to purchase the Bobcat e35 r2 series. What a difference the Bobat is vs the other. Very smooth, fit and finish is perfect, and I have a dealer with full time mechanic if needed only 30 minutes away. I will have all kinds of content using this machine around the property. There will be more of these videos to come, so make sure you subscribe so you can follow along. Thanks for watching!
Check out ‪@OneEyeCustoms‬ for more Bobcat content..
********Amazon Affiliate links**************
Weigh-Safe Hitch for half ton truck: amzn.to/3MYFfSQ

[@SpicerDesignsLLC]

Try giving www.bobcatofdaviesscounty.com/ a call and see what they can do for you. Be sure to mention Spicer Designs.

[@tyronestucker8980]

I have the same machine. Super strong machine.

[@HarleyRiderMC]

Nice “MACHINE!” Congratulations, Kyle.

[@SpicerDesignsLLC]

@@HarleyRiderMC thank you! Im loving it

[@survivalguyfyi5718]

That is one fine machine!!! Yeah I was getting ready to order the KYMRON XH42 until I realized I have a SANY dealer 20 minutes down the road vs 8hrs to Oklahoma. Getting ready to order a SANY SY35U, so comparable to yours only much cheaper. I’d love Bobcat but I gotta keep my wife from leaving me. So it’s 8,500 pounds and will come in at $54,000 with an Agricultural loan. I can get it a few thousand cheaper under a business loan but the interest rate would be more. 5 year/5,000 hr warranty and they’ll drive 300 miles to fix your machine on site at no charge, no trip fee. Nothing. So can’t beat that. It definitely has a better interface than the Kymron machine, has a switch on the blade joy stick for the thumb like yours and the interface allows you to adjust flow settings for different attachments, and you can change from ISO to SAE. Also had a much beefier thumb that pivots at the bucket and not up on the stick. So those were all features the KYMRON didn’t have and I think worth the extra $166 a month. Especially if something breaks. Now I haven’t applied for the loan so this is all estimates. If the SANY doesn’t go through, the KYMRON XH42 will be the next choice. I’ll defiantly be beefing up the thumb if I go that route. Anyways. Beautiful machine. I wish a Bobcat was in my budget. Maybe down the road if I make some $$$ with this thing.

[@SpicerDesignsLLC]

The Sanys are nice. I only paid another thousand more than your quote for the sany. The rebates they were offering were great. My other KZbin buddy bought an e35 too. He quoted a Sany and ended up getting the e35 for the same price with all the rebates. Mine was 56k

[@survivalguyfyi5718]

@@SpicerDesignsLLC oh man!!! Well I’ll definitely check out my local Bobcat than. I priced a Kubota with similar specs and it was like 71k option with a 2 way blade. Man Kubota went and got expensive!

[@survivalguyfyi5718]

@@SpicerDesignsLLC Man. Things must be more in San Antonio. My quote for your exact machine was $68,980 before taxes. Every machine I look up, regardless of brand seems to come in about 10k - 12k more than other areas of the country. Looks like if I buy a machine, I might just have to take a long road trip across country.

[@SpicerDesignsLLC]

@survivalguyfyi5718 ya no kidding. Thats crazy. Come to Indiana. They will give you a discount if you mention me. Might be worth just getting a price from them.

[@patrickkenny2077]

I really hope you go into the weeds more about what the smaller excavators couldn't do for you and what led you to decide on this. Thanks!

[@SpicerDesignsLLC]

@@patrickkenny2077 yes i will be in the next excavator video. Its been a very noticeable change since ive had the Bobcat.

[@chrisbridger3420]

Congrats on the New MACHINE

[@mlukegrady]

I have an E35 I bought a couple of years ago. It’s a nice machine. Very smooth and efficient. The AC is very nice where I live. I also love the quick exchange bucket and the Kubota diesel! My local bobcat dealer has been great to work with.

[@SpicerDesignsLLC]

Thats good to know. I think its going to be a good fit for my needs. Dealer was great too. Thanks for the feedback.

[@lewerim]

You've changed man. I know I've missed the last couple videos, but... Granted the machine count was on point, but you didn't fall down ONCE in an almost 20 min video... 😂 Cool tool...

[@SpicerDesignsLLC]

Hah’ i know! Ive cut back a little but im sure it will still happen.

[@lewerim]

@@SpicerDesignsLLC I guess we should be supportive. I mean, learning to walk is a great skill to master. 😉

[@RBallarddesigns]

Cool machine! For towing I put Sumo Springs on mine. They are great if you don’t have anything

[@annamschnetzer4036]

Referred by The Kelley's Country Life. I've subscribed and I rang the bell! I just realized, I am a member of his channel, so I saw his video early!

[@SpicerDesignsLLC]

Glad to have you. I saw his video pop up but i wasnt able to watch it. Im looking forward to it though. Been talking with Andrew a lot lately. Great guy.

[@OneEyeCustoms]

Congratulations, pretty sure you will enjoy this one!

[@SpicerDesignsLLC]

Im already loving it.

[@johnyakoobian2450]

Awesome congratulations on the new baby girl.i rented one a few years ago definitely strong for its size

[@SpicerDesignsLLC]

Thanks! Ya it definitely has some power

[@PatrickMccallum-zn4fs]

Beautiful Machine location of dealer is so important for service and parts accessibility I am still looking a new dealer opened up near me sells a Australian machine UHI competitive prices I need to investigate anyway best of luck with your new Machine

[@SpicerDesignsLLC]

Thanks Patrick! I agree. I think with the larger machines the dealer support is important.

[@lotsofthc]

really nice you bought yourself a white kubota

[@ajpsawmill4314]

Its always a great day when you get a new machine

[@dustinpitts2741]

I wish you all the luck in the world with the new machine;;;;;;;;;

[@44busted]

Pretty damn awesome Kyle! Wise choice. That will knock out those projects. Good luck!

[@SpicerDesignsLLC]

Thanks Roy! Its a pretty awesome machine

[@DieselRamcharger]

rhinox buckets are really nice. never expected to see one on a brand new machine. i ordered mine direct from the UK.

[@SpicerDesignsLLC]

It is nice but there is about a half inch of slop in the connection area. Bobcat ordered me a bobcat bucket to replace it. They sell Rhinox there too though. I forgot that one.

[@DieselRamcharger]

@@SpicerDesignsLLC oh lame. mine are direct pin not the quick exchange type. my machines a bit older so def less fancy options. really jealous you have a thumb on yours.

[@bradyglass69]

Super sweet excavator! I have the Kymron 26D like yours and was interested in the joystick modification you were looking into where the side swing and thumb could be controlled. If you're no longer doing that project and you'd like to sell the joysticks let me know, I'd love to change mine like you were going to do. I will probably shoot you an email about this here in the next day or so. Again, congrats on the new machine, it looks like you're in love and that makes everyone happy :)

[@SpicerDesignsLLC]

Thanks buddy! I really like it. I just needed something bigger. And yes, email me and we can figure something out with the joysticks.

[@tman7392]

That’s freaking awesome. Super cool machine and it’s awesome that you got the Kubota engine. I have the bobcat E 26 that I recently purchased. Was very close to purchasing a Kimron or Groundhog especially after watching your videos. I have no regrets purchasing the E 26 it has been a fantastic machine wouldn’t have minded the 35 but the 26 seems to fit the bill about perfect for me. Looking forward to seeing your new videos on it. Might want to consider getting those windows tinted on the cab. Just tinted mine it’s a nice upgrade. 👍👍👍 be safe and enjoy.

[@SpicerDesignsLLC]

The e26 looks like a great machine too. I was thinking about tinting it. Ac works good but on a hot day the tint would help

[@PatriotUpNorth]

Love the new MACHINE! Congrats Kyle! Nice!

[@clintonyudt8326]

Hello Kyle. Looks like you got one great machine. Can't wait until you start using it for your projects. Take care. Clint

[@SpicerDesignsLLC]

Thanks Clinton!

[@Rhinox-Group]

A great machine choice! Awesome video, thanks for the mention. We look forward to seeing you put it to use! If you have any other bucket or attachment requirements, get in touch with us or get in touch with your dealer and we can work with them too!

[@SpicerDesignsLLC]

@@Rhinox-Group awesome thanks. I do have a question for you if you dont mind emailing me. Email is in the description.

[@Rhinox-Group]

@@SpicerDesignsLLC Not a problem. This has been passed onto our sales guys, they should be in touch shortly. Thanks again!

[@JupiterMoJo]

Congratz! Now just need to get it dirty... I wonder if any of the consumables/parts are interchangeable with your Kioti since technically it's been the same company for a while. 🍻

[@SpicerDesignsLLC]

I think thats just the compact tractors. I guess Bobcat is owned by Doosan now which i didnt know.

[@johnspoon923]

Congrats man! Awesome purchase. Can’t wait to see what you do with it.

[@SpicerDesignsLLC]

Thanks John! Hope you and the family are doing well

[@upinsmokefirewood]

I was literallyl pricing out an E26 when I switched over to watch this! Awesome machine!

[@SpicerDesignsLLC]

Hah! It was a sign Steve.

[@davidschultz9980]

Nice. I’m using the Kubota unit (very comparable to the Bobcat you purchased) right now on my shop project. I believe you will miss having a blade that articulates. It is extremely useful. It is amazing what these mini’s can do!!! Keep the videos coming.

[@jasongrinnell1986]

Congratulations on the new MACHINE. Looking forward to seeing how good it works for you?

[@SpicerDesignsLLC]

Thanks buddy!

[@jimberg7046]

Nice MACHINE!

[@wynott5128]

Nice. I actually rented that same machine last weekend. Not the cab model But as a new operator was nice to work with.

[@SpicerDesignsLLC]

They are extremely smooth.

[@UncleMattysGarage]

That’s a great size machine. Congrats!

[@SpicerDesignsLLC]

@@UncleMattysGarage thanks! It will be perfect for what i need.

[@OBD01]

Congratulations! Nice machine. Bobcat makes quality equipment

[@ChadCyr]

Pretty damn sweet upgrade. I'm anxious to see what this MACHINE can tackle where your larger Kymron falls short.

[@SpicerDesignsLLC]

Its already changed the game. Its pretty noticeable as far as reach. Ill have a comparison video coming soon.

[@dcmotive]

Triple or quadruple Machine cameo shots really show the excitement, ha ha. The TORQUE Airbags on my Silverado are working great for heavier loads. Same as the Firestones, beefy. Im making up a digital pressure controller for it now. May make a few extras while Im at it.

[@SpicerDesignsLLC]

Good idea! Im hoping to upgrade to a 3/4 ton this year so i can make some money with this machine

[@Dan.A.]

Congratulations Kyle. Obviously you're happy with your new machine since it's brand spanking new, but I am confident you will get years of smiles with that thing. Whatcha gonna do with the Kymrons now?

[@SpicerDesignsLLC]

Ill be addressing why i purchased the Bobcat vs Kymron in the next excavator video. Ive been very happy with the Kymrons but i will be selling them both. The small one may be sold already.

[@Summitoutdoorproductions]

You picked a great machine there bud. Powerhouse. Will do everything you ask it. Have a E32 basically same except not as wide track spacing. Enjoy and congrats. Bobcat is awesome!!! Dave

[@SpicerDesignsLLC]

@@Summitoutdoorproductions thanks! Glad to hear you’ve had a good experience with yours.

[@scotter_dotter]

Some where Rick Flair just wooo’d!

[@hughwilson4911]

Nice one Kyle, proper machine. We got an E10 a couple of weeks ago (used one) and the first thing I noticed was how smooth the controls were. I was going to mention it when you commented on the Kymron being jerky a couple of videos ago but I didn't want to piss on your chips too much. The Bobcats are just so well made and a pleasure to work with. Keep it up and thanks for the entertainment 😊.

[@SpicerDesignsLLC]

Yes i agree. Super smooth controls. Really liking the machine. They had an e10 in the show room. Looked very nice.

[@hughwilson4911]

I think it's the smallest one they do but it suits us fine for getting into confined spaces when we're digging founds for extensions and sheds. And I can tow it behind my jeep easily enough 😉.

[@remital6834]

I think your gonna love that mini ex. That was a cool shot of the ride on the bucket 18:25

[@SpicerDesignsLLC]

Thanks! That was actually pretty fun. Girls were crackin up.

[@tractorrookie]

Ouch! Awesome! Congratulations. I love my e26, I know the new ones are very spendy. You are going to love it!

[@berkoskilandscaping4247]

Second button in is probably auto idle. Great feature if that’s what it is.

[@SpicerDesignsLLC]

You are correct. Yes i do like that feature.

[@dkbfarms7827]

Nice... Machine cant wait to see you fall out of it, trip over the blade, get really confused on how to refuel it. You got this big guy haha congrats!

[@SpicerDesignsLLC]

@@dkbfarms7827 hah! I can see all those things happening.

[@DieselRamcharger]

theres a horn on the left stick, its hidden under the rubber cover just feel around for it youll find it.

[@SpicerDesignsLLC]

Ya its the trigger on the left stick.

[@DieselRamcharger]

@@SpicerDesignsLLC oh nice. mines a button under the rubber you cant see it you just gotta know its there. took me forever to realize it had one.

[@curtbernard755]

Now that’s a nice MACHINE if I’ve ever seen one.

[@kiotimike]

Not messing around now kyle. That's a nice machine!

[@SpicerDesignsLLC]

Nope. I gotta get this stuff done. Sick of my yard being torn apart. Im loving the new machine. Huge difference.

[@markrich6878]

You are a ninja with those camera angles! Congratulations on your new purchase, buddy!

[@SpicerDesignsLLC]

Thanks Mark!

[@markrich6878]

@@SpicerDesignsLLC ❤️

[@nealinator]

Nice new machine! I’m curious how much larger it is than your larger Kimron.

[@SpicerDesignsLLC]

Im going to do a video comparing both of them. That should be another week or so.

[@joelruder2857]

Please, for the love of god, grease the machine every 8 hours or sooner. I work at a very large bobcat dealer. Guy’s get very busy at the work at hand and neglect the machine over time then complain why it takes to long in shop when pins seize up or wear out, sloppy bores. It’s a cheap maintenance item for an expensive machine. E35 is a great machine.

[@SpicerDesignsLLC]

@@joelruder2857 i dont hold back on the grease. The mechanic told me to put some wd40 on the xchange pins too to keeps the seals from drying out.

[@JohnSmith-tv5ep]

Kyle, noice x-key Bud! But I think you need to read those safety stickers? 😂

[@SpicerDesignsLLC]

@@JohnSmith-tv5ep im going to put a machine sticker over them

[@JohnSmith-tv5ep]

@@SpicerDesignsLLC Lol, don't blame ya! I could never figure out what those universal icon stick figures mean anyway!🤔

[@KenMrKLC]

Nice! Per your recommendation I went down to buy a skid steer… got to the paperwork process and I mentioned Spicer design … someone punched me in the back of the head and I woke up in the hospital. I guess I will have to hand dig my next project.

[@SpicerDesignsLLC]

Hah! Ya thats how i usually get treated too. Mostly in my own house.

[@klcameron709]

Bobcat is a great machine. I like your purchase.

[@matthiasaronjonsson3066]

Very nice MACHINE! Congrats!

[@SpicerDesignsLLC]

@@matthiasaronjonsson3066 thank you! Im loving it.

[@aarondickenson7146]

Beauty machine 👍

[@765Guys]

Very nice unit, I’ll be curious to hear why you went with bobcat after first hand owning and saving tons of money on Chinese minis. Your videos almost had me convinced to buy a kymron but for resale value, quality and parts availability I chose bobcat.

[@SpicerDesignsLLC]

Ya that was a big part of it. I will get into more detail on the next excavator video.

[@biggieb400]

Nice machine. Anxious to hear advantages over the large Kymron.

[@SpicerDesignsLLC]

Yes that will be coming soon. After 5 hours on the new machine its pretty noticeable.

[@biggieb400]

Sounds like a good upgrade!

[@austinavery4772]

It looks way easier to tow than my e60... But love the 60 long arm counter wieght .. Stable and strong.

[@SpicerDesignsLLC]

@@austinavery4772 ya that e60 is a monster. Definitely not towing that with my half ton.

[@austinavery4772]

@@SpicerDesignsLLC i gotta tow it with dump truck. Its 23k with trailer.

[@Outdoorsy368]

M A C H I N E ! That one is cooool, congrats on the new toy

[@SpicerDesignsLLC]

Thank you! Its pretty awesome

[@TKCL]

Congratulations Kyle, that's one sweet machine! Man I sure could use one of those!

[@SpicerDesignsLLC]

Hah! Thanks buddy. You could totally use something like this.

[@TKCL]

​@@SpicerDesignsLLCI sure could, been wanting a mini for years.

[@DudeRanchDIY]

Congrats on the new machine Kyle!

[@SpicerDesignsLLC]

@@DudeRanchDIY thanks buddy!

[@StahlFabrications]

Upgraditus is real. 🙂 I did this with my tractor, upgraded after a year. Love buying a new MACHINE! Enjoy brother!

[@SpicerDesignsLLC]

Yes very true! Doug from One Eye Customs called it when i bought the first one.

[@StahlFabrications]

@@SpicerDesignsLLC I suspected you'd be upgrading too after you purchased the others. Think my new motto is to figure out what I think I need, and go up a model.

[@markbrockelman316]

Awesome purchase. Have fun.

[@r-dub18]

Be sure to torque the sprocket bolts every so often, ive seen them get loose and shear off

[@SpicerDesignsLLC]

Thanks for the tip

[@VanguardSys]

been there done that - now i always try to get the biggest machine i cannot afford - we always need "more power - arh arh arh"

[@user-ld5tv1xb3h]

Great job.

[@adxzv5352]

Congrats brother, you should get it tinted

[@danholmblad9925]

You made a good choice. I do prefer John deer. But I understand what you did. I would keep the small one get ride of the median one. Great video keep up the awesome work. God bless.

[@SpicerDesignsLLC]

Thanks Dan. I think once you get to the larger machines name brand is better in the long run.

[@cliffgeter1105]

Nice Toy!!! and the best music tracks on KZbin!!!...

[@SpicerDesignsLLC]

Thank you! It can be a challenge picking music.

[@rantiksadventure1920]

I love bobcat. You’ve earned it.

[@SpicerDesignsLLC]

Thank you!

[@Mr.S7R4WM4N]

One Clean Looking “Machine!”

[@millythecat7211]

originally thought it was gonna be a CAT 304, but when i saw the Bobcat logo and vehicles i started thinking I guessed it was gonna be an E35, must be popular machines cause i see the 2 everywhere

[@stevenbecker9302]

I bought the same one last December. It’s only got about 40 hours on as of today. The E35 meets all my expectations so far and is surprisingly powerful for a machine in this weight class.Along with the 18 inch trenching bucket I also bought the 36 inch grading/ ditching bucket. The 36 inch bucket is really nice for cleaning water way ditches. Should have bought one of these 20 years ago!!

[@SpicerDesignsLLC]

@@stevenbecker9302 thats good to hear. I can tell already this machine is going to fit all my needs. Im itching to get back in it.

[@buffalostate1]

How much was it ?

[@OldIronAcres]

Sweet pickup... my dream machine! Best, -- J.Andre. / Old Iron Acres

[@golfbravowhiskey8669]

We have right at 25 of those weight class minis with our company. The Korean bobcats are fairly nice machines but we have had some structural issues with the booms. We stopped purchasing them about two years ago just to many failures and downtime The caterpillars were way out of cost range and you just can't hardly afford to own one outside of warranty. So that left us was just the Kabota KX 57 along with about five of the bigger kx 80's and the Hyundai hx60 Most of our Hyundai Fleet is getting towards the end of their life with our company we try to turn them up when they get above 2500 hours they are excellent machines except seat comfort and not having cupholders etc inside is the only holdback The Kubota are very well thawed out as far as cab comfort and the heating and air here in Texas or you need that air conditioner works great, the bobcat not so much All of the hands that grab a mini always run and get the Kabota in the yard in the morning leaving out early.

[@rockyevans5171]

You went cheap o. I want to see jiggle. I damn near died laughing. Your wife has a good sense of humor.

[@SpicerDesignsLLC]

Ya she has to, to put up with me.

[@bobbymcbulge18]

Nice MACHINE, I’m jealous

[@Z-Bart]

My buddy has a Bobcat excavator. He's let me run it a few times. Nice machine!

[@SpicerDesignsLLC]

@@Z-Bart they are very nice machines. Super smooth

[@ScottyLo]

Good luck with your new machine. I rented the same machine a couple years ago from Home Depot. It was a great machine for me. I dug very large boulders some 3’ in diameter and various other sizes. It did an amazing job. I had it for a week and I had a blast. Adding fuel to it with a plastic diesel can was not easy though. Great machine

[@slherzog]

Now that is goals!

[@michaelmisiolek3054]

Thanks for the info

[@Tim4111]

Now you have to fabricate a grading adapter for the bucket

[@SpicerDesignsLLC]

I do. That thing works great on the Kymron.

[@Berensmetalworks]

Bigger machine right meow!

[@TorturedPeace]

The other nice thing about Bobcat; they have the parts! Something breaks, you can get it…

[@ProtonOne11]

If you can afford it, that is. Bobcat spare parts can get crazy expensive, even for relatively simple things. Something to consider especially when you get used equippment that need some love to stay in service.

[@premiumyt8625]

Genial saludos cordiales desde Patagonia Chile

[@bud1412]

Happy for you, really nice rig, did you sell the other?

[@SpicerDesignsLLC]

Thanks! One may be sold. I have an upgrade i want to do to the larger Kymron before i sell it.

[@jasonholloway998]

Congratulations on a real American machine! MACHINE! Don’t trip getting out!

[@yayinternets]

Bobcat is owned by Doosan in South Korea. Just don't think they would really be considered American any longer. I'd assume their excavators are probably rebranded Doosans as well. Nothing wrong with it, South Korea makes good products. Just saying it really isn’t an American company any longer.

[@jasonholloway998]

@@yayinternets meaning made here by Americans not imported

[@yayinternets]

@@jasonholloway998 Oh nice, I see what you’re saying now, thanks for the lesson. I was learning more about it from your comment, and it looks like they are literally the only compact excavator manufactured in the US.

[@barryrehnert1768]

MACHINE!

[@coltongarber8087]

ik backup alarms can be annoying but they're on construction and farm equipment for the safety of those who are working around you and i don't know for sure but i think it's a law to have them on at all times and if you disconnect it and someone doesn't. Know you're backing up well we know a human life can not be replaced 😢

[@balamala2647]

Awesome purchase Kyle but if Kymron had a dealership close to your house too, would you go with another Kymron machine or no?

[@SpicerDesignsLLC]

@@balamala2647 thanks! I will address the reasoning in the next video but i will say that i would not. Nothing against Kymron but my personal preference when purchasing a larger machine was to go with name brand. I did consider the xh42.

[@Marine-wj4jv]

Are you considering moving up to a HD 2500 truck? I ran into a situation this week where I needed a Ram 2500 to tow a forklift. My 1500 could not do the job. Sometimes bigger is better.

[@SpicerDesignsLLC]

I am. Ive had something in the works for a while. Still waiting, but id like to be able to haul this around and make some side money with it.

[@IndyFarmLife]

Happy for you buddy! That's a nice machine and a big day! Since you were at max capacity, I won't hold it against you that you didn't snag me a Hopper ha. So what are your plans with the smaller machines? I'm in just the opposite boat, I need something smaller. The 580k is too big for household projects. Looking forward to our reunion soon!

[@SpicerDesignsLLC]

Thanks man! The smaller one is likely sold. I have one upgrade to make to the larger machine before i sell it.

[@IndyFarmLife]

@@SpicerDesignsLLC Nice! I won't make any purchase commitments in YT comments, but let me know before you do! Ha

[@SpicerDesignsLLC]

Hah! Will do

[@hudsonvalleyhealth9758]

please Lord bring some more money my way so I can get one!!

[@joemurray9131]

Nice Machine!

[@SpicerDesignsLLC]

Thanks! I absolutely love it

[@danramos281]

Awesome machine!!!

[@yota87truck]

How much? We paid ~$50k for our nearly identical 2021.

[@SpicerDesignsLLC]

Not much more than that. Ill give all that info in the next excavator video.

[@joelyle4187]

Nice machine when are you upgrading that truck to 3/4 ton I have a hitachi 26u and my 1/2 ton with the with the little diesel in it is pretty much maxed out

[@SpicerDesignsLLC]

Ya the half ton doesnt cut it. I do have something in the works. Id like to be able to make some money with this machine. Need to haul it safely.

[@jasonholloway998]

Now you can dig a hole for the other two.

[@Berensmetalworks]

Very cool new machine! Does the machine beep when you track in both directions?

[@SpicerDesignsLLC]

It does. But i wont for much longer. At least when im at home.

[@Berensmetalworks]

@@SpicerDesignsLLC maybe it's that swith in the cab by the cup holder manual area?

[@SpicerDesignsLLC]

It is. It will shut it off until you stop. Then it will beep when you move again. Have to keep pressing it. Ill make some changes on that soon.

[@stich1960]

The thing I didn't realize when buying my cheap Chinese ex is that they are not comparable ton to ton. My 3 ton can be crazy outworked compared to some I have seen on yt

[@SpicerDesignsLLC]

Mhh thats pretty interesting. Do you have an example?

[@stich1960]

@@SpicerDesignsLLC don't know what the video was but they were using a 3 ton bobcat and I realized the capability specifically reach and control are night and day different than my crummy Chinese ex

[@SpicerDesignsLLC]

Ya i can say first hand the reach and smoothness of the controls are on a different level than my chinese machine. If you can be smooth in the chinese machine you will be an expert in the Bobcat.

[@coltongarber8087]

The you loaded it and said that you wouldn't have enough room if it was facing the other way so you loaded the Excavator with the stick arm and bucket facing towards the front of the trailer and the back of your truck instead of towards the back of the trailer where the ramps are makes sense

[@JCWren]

Machine!