Spitting And Sputtering Issue Solved

Amazon Affiliate Link To Gumout 800002230 Carb and Choke Cleaner, 16 oz:amzn.to/2JASxEr

[@bikelifekid4030]

Love the fact you'll make a video for anyone that has a problem with something

[@azzalil7532]

The other week 😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊

[@azzalil7532]

The other week 😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊

[@asilva_media]

yessir

[@ricnegrete1991]

That's a man who knows what he's saying. Thank you

[@jimconverse5343]

Thank you, Thomas. Clear and well explained. My Rancher stumbles , sputters when under load (pushing snow up a hill).

[@pizzaboy564]

Did you Clean yours like that? Did it work? Mines doing the same thing.

[@jaydookie9921]

This was probrably one of the best videos about small carbs thank you so much I dont think Anyone could have explained that any better video was straight to the point.. Ive been struggling with a small carb. First it was leaking out the over flow then it was backfiring thru the air intake now its bogging down with throttle doesnt die starts right up but bogs way down driving me crazy but im pretty sure after dozens of videos this is the video i needed to see. Will let you know thanks again

[@RomsonKuldiRex-fq1mo]

This is indeed a brilliant explanation ever to my Yamaha AG 200. By looking at this vedeo I've also checked and cleaned the main horse's nipple from the fuel tank to the cab which was being blocked by so many dirts. 2 Problems that were solved are engine dies when at low RPM or when at higher RPM, and hard starts again at about 3 minutes. ❤❤

[@msjsel]

Really liked this video. Thanks Thomas! I'm new to working on small motors and eager to learn. Learned alot. Thank you. This is the first of your videos. I've subscribed and will be checking more of your videos. I'm here because, guess what? My new to me, used ATV, is having carb issues. So again, thanks

[@MrRickyb1991]

im going to try this today. i have an old 1991 honda 300 fourtrax that seems to carbon plugs almost instantly. the bike idles great and can putt around in SL no problem, but as soon as your on the throttle to get through your gears, its as if the mid range power is completely gone it struggles to accelerate, and it starts to come back in to normal in the high end RPM. its causing jerky acceleration through gears and when finding your cruising speed. ive taken apart the carb and cleaned the jets, along with replaced the air and oil filters, plug and oil. somewhat fixes the problem but reverts back (my guess once the plug fouls) im starting to think the float may need to be adjusted now, thanks for the new lead!

[@JoseRodriguez-dr1jj]

It felt like a buddy was helping me understand carbs better. Thank you.

[@thomasbriansavingmoney]

Thank you for watching! Happy to hear!

[@justinnheathercika9192]

Thank you!!! I am a complete noob and just started getting into ATV’s last summer. I am currently on my pulling carb for the 7/8 time done yesterday. the same carburetor in and out with out luck This video may be my saving grace

[@kenwilson2314]

What kind of atv are you working on? And did you try this yet? Having problems with a 2004 predator 500 stalls at idle. I’m going to try and pull the carburetor this weekend.

[@frerecampbell9291]

Thanks for "very well explained" instructions for repairing an engine that only runs on 1/2 choke.

[@user-so5gy4jd1u]

Best explanation yet. 2 out of four are doing this. I'm on it. Thanks. The 99 honda 300, never a problem. The rubicon 472, both have this issue. Was puzzling. Will follow.

[@darryldoesit966]

i have the same issue with my recently purchased kawasaki brute force 750 atv. Seller told me it ran great and had the carb cleaned and re jetted by a local shop just before he put the bike in storage for the winter season. When i showed up to buy it, it spitted and sputtered like crazy and would not stay running. After i rode it around a little bit i raised the choke level up about 15% and it seemed to run fine then...the idle was great and no more sputtering or spitting. Seller was shocked and told me it ran perfectly before he stored it for the winter. I went ahead and bought it anyways knowing it was fixable no matter what and he gave me a killer price on it so I was still stoked to buy it. I so far am just riding it with the choke partially open and it runs fine so far that way at least.

[@andyMSH700]

colourtune plugs are handy as you can check the color of the flame which should be Bunsen blue after the choke is pulled in. there is a mixture screw under the carb usually which you can screw out a turn to get more fuel...might be worth a try. As long as the jets are the correct ones and the float heights are correct then with a clean carb the bike should run well.

[@ronaldjerrimmy4659]

Fantastic man I think you've just reminded me to clean the little holes on the jets I so got lazy and just changed the jets didn't bother to look in the little holes thanks for real man , peace

[@lelandbatiste9443]

Learned lots from this. Just got my first dirt bike, thanks tons!

[@comehick1421]

Be carefull but not too much ! 🤘😎

[@genecitarella3516]

You make a whole lotta sense bro! I'm having the same sputtering symptoms, only I have a Harley 2009 cvo fatbob with electronic fuel injection and what you just explained with the example with a carburetor is the same in nature, "Thanks big guy and be safe!

[@bryanevans4651]

im gonna that, maybe tonight cuz im so eager on getting my moped running good thank you.

[@DrMcampbellDC]

To the point and exactly what I needed. Thank you!

[@nicocooper9217]

Thanks man. Just bought my first carberated bike and want to learn as much as i can about it so i can wrench on it myself. It spits occasionally, its about 40 degrees out here in colorado, and it apears to only do it when choke is all the way in... so it may just need to be dyno tuned... apparently again... not sure if its tuned for this elevation. Assumed it was and that may be a mistake as i should have asked and the dealership may have shipped it up from elsewhere.

[@joshbethel5800]

Great content. I have a 82 cb650 cylinder 4 sputters and backfires. I forgot to remove and clean the idle jets. Did everything else.

[@lindarakowski7827]

Is not likely I personally will attempt this, but you are a great instructor! Clear, concise explanation. Thank you for the insight.

[@stevedriscoll2539]

Good video. I have been burned on that a few times where i didn't or couldn't get the emulsion tube out and the engine would still run poorly

[@Ryan-br3hq]

Good informative video. Brief and to-the-point. Thank you

[@jmaxim80]

i don't think i've ever seen a pair of old school man hands like this in about 20 years. cuddos to you sir you use the body god gave ya.

[@vishnusimba6136]

similar issue with my royal Enfield 350cc. Uses a 29mm carb, the bike tends to start dying when it's running with load at a constant throttle, say through the mid-range RPMs (2000- 3500 rpm), but post that 3500 rpm till the redline at 5500 it works fine when throttle position is constant there.

[@jasonfritz1963]

That’s crazy I was looking at buying a 2008Q link 700 front runner side-by-side with a sputtering issue in the first video. I find covers my ATVs issues I have a 400 Polaris and I’ve been struggling with the sputtering issue so now that took care of that problem.

[@jeffguia7371]

Straight to the point no nonsense talking.

[@adamchanez7470]

Best video out there explaining the float awesome job Man

[@scanadaze]

I could not figure it out. My new motorcycle only has 200 miles on it. Came with a carburetor I have to work to get the screws off the bowl. No biggie. Yet it puzzled my on what it was doing. Did not make sense. Now it does. So, I'm going to do exactly what you suggest. I will see. If works, you just saved me money and a big headache. Thanks for your help.

[@joechavez4494]

Good short. But very informative video. Straight to the point ☝️. Thanks.

[@geronimostruths1463]

Man runs perfect in every gear when you put it in reverse it don't have no power it just spits and sputters will not go backwards I also bought a brand spanking new carburetor and put it on it and it run perfect but like I said when you put it in reverse it just spits its better it won't go backwards unless you're on flat ground

[@stevensonmcneill2796]

This video helped me get my 4wheeler running like new thank you so much

[@vicland4641]

Thanks for the video it help me out and solved the problem I was have with my Yamaha atv.

[@rickstuksa5265]

Like the video and so correct, I have a polaris Razor that was cleaned and I took the entire thing apart. I started the engine and adjusted the air fuel screw along with the idle screw. The engine idles but will not accelerate without popping and spitting. I have adjusted the needle through every setting, please help

[@danielm6507]

That looks a whole lot like the Mikuni VM38 on my '77 PE250. Thanks for sharing

[@gypom795]

Hey man. Love your video my mate has 150cc pitbike. He had no air filter. I make him get air filter. Bike runs bad with air filter. We clean side of jets and all carb. Bike still runs OK when take off air filter. I have try to adjust air fuel mix screw but it is always lumpy in the top end and try’s stalling

[@RobbiRocks]

Great info here Tom, and Thank you for not having any annoying back ground music, Cheers

[@PhatChanceAthat]

Those are some working hands if I ever saw some. Keep up the good work.

[@rodrigogonzalez3620]

10 stars bro! Thanks man!

[@paddyshaw1119]

I’m having issues with a 1998 vn 800 classic. After about 25 miles at highway speeds It’s back fires and dies as of its run out of fuel. I’ve researched this issue and these bikes are known to have issues with the petcock and more specifically the “fuel screen” that sits atop the petcock in the fuel tank, as this is the only filter on the bike. I’ve ordered a replacement petcock because it was the only way to get a new fuel screen. I’m going to replace said parts, as well as add on an inline fuel filter between the petcock and carb, probably only on the “main” fuel line. I’m also going to replace the fuel lines and pull the carb apart so that I may free the jets/floats/needles of any build up, as I know they have not been taken apart in some years. My question to you would be, what else if anything should I look out for and what else may need repair om order to perform properly ?

[@gregmonz697]

Great video , going to try it on my granddaughters youth snowmobile . One question though . How tight do you make those screws when you put them back in ?? Thanks again Greg

[@hubertbryant5587]

Ive got a generac 3100 pressure washers runs great carb cover off . put the cover on spitts and shutters,

[@dblr616]

On my o7 Yamaha golf cart I pulled the carb to clean it... just regular maintenance now it won’t run without the choke on ive sprayed around the carb for vacuum leaks and it don’t have any the only thing I could not get out was the emulsion tube under or I guess above the main jet

[@brianhimick868]

Great video. I succeeded in rebuilding both carbs on my 1997 Polaris 500 snowmobile thanks to this video. Reassembled carbs on machine and fired it up. The mag cylinder is not drawing in the fuel, thus the mag cylinder is not firing. Suggestions?

[@mypaldave]

Great job! You made it very understandable

[@neildrummond5711]

I have a taotao 125cc Dirtbike. The carb it doesn’t run great with unless it’s in higher rpm. Whenever it is idling I have to feather the throttle to build the rpm before going. If I just hit the throttle from idle it bogs down and dies. It’s super annoying to ride because of this. Also the piston was on wrong with the intake and exhaust sides flipped since I fixed that it does run better but still is the same bogging problem. I’ve adjusted the carb so many times but to adjust the air fuel screw I have to take it off and it’s annoying taking off over and over

[@kyleyeomans4261]

ur such a genuine guy. i love it. keep doing u

[@EnvyTheRealest]

I have to give mine half throttle to start. The auto choke works fine, so I guessing its the slide. I have no filter on it,the filter I had on it got destroy by the carburetor when I buy the carb new, haven't put back one yet

[@mikewilson452]

After changing carburetor and air cleaner filter on my 1996 Polaris sportsman 500, I have a cold natured carburetor but runs great after about three minutes of warm up but every time I go in reverse it conks out. every single time no matter how slowly or how fast you reverse it comes out works great in forward makes no sense. What could be the problem? Mike Griffin Georgia

[@CarlosGonzales-xk5jk]

I've done all that can you let me know we're my mixture needle needs to be? The carb needle fell and I put the e clip on but can't find the right mixture with the neddle

[@eeyyaakk6801]

hello friend, what's the first thing to check if fuel economy is not what it used to be? can you enumerate the things I should check starting from the simplest? thank you very much

[@vickiholman9436]

Does apply to trucks too, I have no issues until it changes gears and once it passes it's fine?

[@yootoobed]

Great video - kicked it - straight to the point. Any thoughts on why fine gas vapor is blowing out through the air filter area on a Kohler Command Pro CV25 ? I pulled off air filter today and noticed a nice pressurized flow of gas vapor flying out of carburetor up through air filter area.

[@TylerTheBassCreator]

That's what happens with no air filter...

[@joaomelo61]

Did that in a PHBG 21mm.. still spits. I noticed that by adjusting the air mix screw it made it a little better, but still spits at WOT. Tried many different settings turning the screws 1/4 at a time but still cant get it right.. i had to lean it a bit moving the needle ring up as the engine was constantly flooding. Thats when the spitting started... should i get the needle ring back in the middle and change to smaller jets?? Main jet 92 idle get 50 Gilera runner 70cc. thanks in advance

[@frankdillon6127]

thanks i cleaned the pilot jet and it was clogged now the bike runs perfect. the carb is a new mikuni vm-32 the jet side holes were clear, but the very tiny center hole was clogged.

[@sunkim6426]

Hi Thomas, I have some questions I'd like an answer for. I have 1995 summit 670 with vm40 mikuni carb, everything is squeaky clean almost spotless in there everything new except for needle jet and needle. (needle valve, seat, main jet pilot jet, gaskets) and had it set up to factory such as round slide opening air screw and idle screw float arm adjusted to 19.6mm bottom of the arm to face of carb where gasket sits. carb was keep flooding I tried to have float arm to 20.5mm didn'tdo it. flipped the arm set it to the height still flooding. I took the slide out and excessive amount of fuel was coming out from main jet( throat I think), thru jet needle tube. I blocked the jet with needle and tried again and breather hole and such was puking out fuel. why would it be keep flooding? and its happening to both of carb and I dont know if floats will go out at same time

[@greenhatgaming6336]

I have an issue. i got a 1978 kz650b, it has a 4-1 pipe which is basically straight pipe since it was drilled out before i got it and since rusted, it ran really weak so we bought k and n pod filters aswell as upping the jet and pilot jet sizes to even out the mixture. the #1 cylinder and only that one will backfire out the carb every few seconds at random, the carbs have been cleaned twice, pilot and main jet are new and it ran consistently (however weak) before and i cant find a solid answer anywhere. in addition to that ive also been told that when it was parked (35 ish or more years ago) it ran fine however the original carbs were misplaced so new ones were bought, they fit and worked before the jet upgrade but i have no clue whats wrong. please any advice would be helpfull.

[@guillermomillan254]

Hi . Thomas thank you for the info, i have an issue with 2006 ktm 50sx with stock carb and jet Dellorto carb brand. cleaned carb. as you said. 4,x. it boggs down at full throttle bike on stand. 60/1 fuel ratio. im in california 40 miinutes inland from beack. so u get idea on elevation. i appreciate ur help

[@thenegilskis199]

Hey just a quick question it's pertaining to a honda cruiser cycle. But with the carbs. I rebuilt em changed jets and but didn't change air/mix screws all same number jets just didn't want to clean em. Call me lazy anyway. I get hesitation at the top of all my gears and can't get over 55. Only have about 1/4 maybe less throttle pull in gear with load. Full rev in neutral. Don't really think any pop coming down if I member right. What's my area to reset? Side note. Parts are cheapest off Amazon. Bout the only things I really needed out of it were the two Lil round diaphragms and two o rings for my mixture screws. Should I pull amazon parts and clean oem 30yr jets and put them back in w new Orings and gaskits that I just got? Or do you think since probs at top of every gear and my whole final gear it's my coils and wires?

[@Canofme22]

What would the problem be u think on a quad bike when it’s bogs down after u leave it idle for a little bit or doing slow speed and the cooling fan kick in when it’s at temperature only plays up when it’s get warm

[@jeremydahl5030]

I have a skidoo that dumps fuel out the side tubes on the one side but how do you take the plastic pieces out of the side i broke one of the hose fittings off its all plastic one on each side

[@MrJcacon]

I've got a 1962 Ford 3000 tractor with a Holley R3655A carb. I have removed it and am in the process of cleaning and installing a kit. However I can not get the plunger to come out of the little tower it is in. I've had it soaking in carb cleaner for days and it will not pull out. Do you have any tricks for that before I attempt to drill it out?

[@gerdunne1708]

Iva a Kawasaki KLF 300 that won’t start !! It was originally just getting slower and slower to start, so I stripped carb and replaced all needles and jets etc , I found someone before me at left in too many rubber rings and washer on pilot air screw jet , but now after re-assemble it won’t fire at all ?? Just seems to back fire through carb a little bit , I’ve good fuel and I have spark , I’ve tried spraying into carb while cranking to see but still no fire ????

[@cbnx82703]

Question for, Im helping a friend with a polaris 500 predator carburetor issue, the initial complaint was only start and run on choke, would not accelerate but stumble flat out upon trying to increase rpm. He brought the carburetor to me, I opened it up found a plugged main jet and slightly plugged pilot jet / emulsion tube, all clean now and reinstalled, now it will start on choke and idle off of choke but as soon as you try to accelerate it stumbles flat , the diaphragm slide does move up but kind of bounces as it stumbles to rev up... What is going on here, no vacuum leaks on the intake boot either...

[@braleyshardwoodcustoms8584]

Mcleaned my bowl and floats droped out of their place , apparently I replaced them wrong because now soon as I turn the gas on and get ready for kickstart I'll notice gas is flowing freely off onto the ground from a side valve of the kehein carb . Need some pointers as to exactly what's causing my issue

[@joeestes8114]

Awesome video! Iam having problems with my yamaha wolverine and it's spitting and sputtering like it's starving for fuel, i bought this bike brand new and this is the first problem I've ever had with it.

[@deannaoxendine1202]

I have a wolverine doing the same thing

[@joeestes8114]

@@deannaoxendine1202 change your spark plug

[@steamwillrise]

I'm getting a sputtering at low revs, low speeds. Usually at minimal throttle use. Full throttle and regular riding is fine. Model is a VZ800 (M800) 2011 Suzuki Intruder. M50 in the states. Here's the thing....fuel injected rather than carbs

[@chrismaiolino800]

Brian sweet video . Help out a lot . . But Brian . I have a 2004 msx 110 Polaris sea doo .. my My throttle is sticking , and it’s half cable and half electric. . And as soon as u open it up it stays open . . Also I have a engine light flashing . Is their a way to find out what sensor doesn’t work . U know like in Honda civics u place a paper clip and u turn on the ignition and the engine light flashes the code . Dose the sea do have the same idea . .

[@ericmontanez7276]

I took apart my carburetor yesterday and when putting it back together I found a gold screw and didn’t know where it belonged 🤦‍♂️ now I know 😂. Gotta take back apart

[@michaelpassionsgarage356]

So, on one of my floats, the arm broke off, the one that the bar goes through to hold the float in place, any ideas? or can I run it like that hanging a bit? im also running on 1 cylinder, could this be it? or do I need to do a better job of cleaning the carb? one more question, what's the easiest way to check to see if im getting fuel into the head from the carb? do I just open the hole and rev the engine to see if it's spraying? I have strong spark

[@woodsrunner7102]

Got a 2006 883 sportster. Would cut out on low speed crack pop ....everything they are known for. CV carb. I assumed pilot was too lean from factory (42) so I went thru process after complete cleaning of carb, replacing accelerator pump diaphragm and orings, gasket, of trying multiple new bigger pilots. 45, 46, 48. No change. I got a new 42 pilot, put it in. Problem now is upon throttling, it bogs n dies. If I stay off throttle itll idle all day, but soon as throttle is given, it bogs. Tried adjusting air mix, 2.5 turns out from lightly seated and 1/8th turn in from there. Gradually closing but No change. Bike has drag pipes. No baffles ran before that way just would cut out under 3000 rpms so I set out to fix problem, lol , now I can't use throttle at all it dies. I've adjusted idle as well with no luck. Black sooty smoke out pipes upon throttling, or it spits from carb airbox side of throat. Plugs fouling bad. Changed plugs, put bike back stock, 42 pilot, 175 main...float been adjusted by spec...idk what else to try. Starts without choke ez. Soon as you throttle it it cuts out bogs n dies...all this just to try to stop the low speed popping n cracking...😎. Guess I should have left it alone but I was trying to improve it. With a bigger pilot. But that failed. I believe its overly rich...from the black smoke out pipes...and fouling of plugs. About the only thing I haven't tried is shimming the needle, which I understand only richins mix so I have not done that...any ideas? Bike only has 22000 miles on it. Screaming eagle stage 1 breather....drag pipes, everything, [e-mail]. appreciate any ideas. Float valve is working, accelerator pump works, no tears or pin holes in slide diaphragm....all channels blown out with light psi compressed air after complete rebuild and clean....rebuilt completely totally dry n clean....I'm lost...help? I do my own wrenching, dealerships take you to the bank even when it's a 20$ deal they take you for 300$ this has to be something simple....emulsion tube is stock, emulsion tube jet is installed correctly. ...idk...thx for suggestions...my email is above.

[@MatthewKiernan_cool_stuff78]

I have a 1976 Sachs engine, Sparta buddy moped, 49cc. I pulled the old carb apart and the slide was ready to breath in half. I got a new keign carb and installed it. The moped starts fine, pulls hard, but breaks up at full throttle? Any suggestions... Thank you.

[@dgratt02]

How do you diagnosis Hanging idle on deceleration on a 400cc 2stroke ?

[@kennylavay8492]

that is what i like straight to the point no bull shit .

[@vuch9208]

Thanks for the video. I have a mercruiser 3.0 litre. I was having some bogging issues under load. I changed the fuel filter at the base of the engine, the filter just inside the carb where the fuel line attaches. Cleaned out the clear tube running from the carb back down to the fuel filter at the base of the engine. I put in new spark plugs gapped to .030. Now the boat is running better, the idle is still a little rough but the main issue is after I've been at full throttle for a few minutes I begin to hear a popping sound. I back the throttle down and the popping goes away but then at no wake speed I hear a ticking sound. I've run three cans of Seafoam through 15 gallons of gas so far. After shutting down the engine for a half hour or more the boat seems to work fine until full throttle results in popping again. Thanks for your thoughts!

[@jessesmith1181]

Just a suggestion but try adjusting the valves. Even if that's not the problem it is always nice to rule valve adjustment out. The ticking could be a loose rocker arm and this will usually cause a hard starting issue or long crank times before starting.

[@vuch9208]

@@jessesmith1181 Thanks for the idea. I am new to working on my boat this season. The boat usually starts right up. Are the things you've suggested something to do after taking the boat out after the season is over? I keep the boat on a Shore Station lift with a canopy. My only concern is that I wouldn't have the boat put back together before 9/15 when I plan to take her out for the season. Will I do damage to the boat if I continue to run her conservatively until the end of the season? Thanks!

[@jessesmith1181]

Not sure about damage, it really depends on how far out of adjustment the valves are but if you are hearing them tapping or ticking one of them could be pretty far out. There is a 15 minute ish video on you tube just for the mercruiser 3.0valve adjustment. So you know exactly what you are in for labor wise

[@jessesmith1181]

The popping you are describing is it a backfire through the carburetor or out the exhaust possibly? Trying to figure out what u mean when u say popping at full throttle

[@vuch9208]

@@jessesmith1181 The ticking becomes un-audible after about 3-5 minutes while running at no wake. However the cycle repeats itself (popping then ticking) if I go to wot after the ticking stops.

[@cjmatchett115]

My banshee has been making a coughing sound out of the right cylinder for a week or two. I’ve cleaned the carbs and air filter and it’s still happening. I need to replace the reeds but not sure if it could be too or bottom end. Any help would be awesome.

[@nickayivor8432]

SUBSTANTIAL Sir Thomas Brian Thanks 👍 as always enjoy Sir Thomas Brian From Nick Ayivor from London England UK 🇬🇧

[@sheldonm101]

Having a similar issue. 82 Kawasaki csr 305. Starts right up, idles great, revs great. Go to take it down the road, not rideable. Bogs down and has no power unless wide open sometimes.. any help appreciated!!

[@michaelcasciere7149]

Great video. Do you have a video on timing? 1998 polaris explorer 300?

[@js1936mac]

Thank you you're a good teacher❤❤❤

[@iowaorganicfarmer8128]

Bogging while full throttle help, Polaris sp 400

[@karlmarcel4932]

Thanks for the info… I have a riding mower that the carburetor is spitting out gas & I believe oil/ it’s some type of black liquid…. Any thoughts?

[@dgmenace73]

Hi. Maybe you can help me out. I have 2010 Kaw Bayou 250. It cranks and idles fine. The first thing I noticed is after first starting and letting warm up, it idles fine but if I rev it from idle it cuts out....I had to slowly get to that full throttle. Then when took for a ride it sputtered a lot at high throttle. I cleaned carb. I did notice that the float was high, I adjusted that , removed jets and cleaned ALL holes....running same way. This has the bottom front fuel/air mixture screw. It has spark but not a bright blue spark, more of an orange spark. I am thinking I may need to raise main needle or adjust fuel/air screw out for richer? Let me know what you think or anything that may help. Thanks

[@omarvilreal7]

How about cub cadet that is like fuel injected and does not really have the old fashion carburetor . Motor was surging but now it won’t turn on. Any suggestions?

[@fyresafe75]

Is it normal for the carb floats to be stuck in the bowl? Is this the design? Never seen that before. I have a 1982 yz125j that keeps flooding the cylinder and plug. Can you make a video on that cause and fix?

[@FRS.Skylar]

My Kawasaki bayou 300 has a new carb on it. It starts right up but when I give it any throttle it just dies right away… new to small engines so pretty lost at the moment

[@olliewallace4517]

Question, I just bought a 1994 Kawasaki Bayou 220 and the starter sounds horrible. I replace the starter with a brand new one off of Amazon and the starter sounds exactly the same and it’s almost like a grinding sputtering noise and it sounds like the starters not getting enough power to crank the four wheeler. Any ideas?

[@9saulsantana]

I believe this video will help me out because my Polaris 250 trail boss is Puking fuel all through the exhaust

[@charlestankssr9895]

Hey hey I have a 1976 25 horsepower Evinrude when I give it full throttle it's sputters and it's almost like it's having a hard time moving but it goes about 5 mph and it doesn't wrap high in the RPMs

[@tomgavin2629]

Would air be best to clean that little carb? If we dont have a air compressor what could we use?

[@anthonyschultz9560]

I have a 98 Kawasaki Lakota 300 doing the spitting sputtering and backfiring idols perfect when you hit the gas doesn't want to move and spit and sputters

[@terryalexander6333]

Great video, man!

[@jsimm4587]

Got a polaris 425 that cuts out going up hill is the float to high ? Runs ok flat ground .

[@Nikita2fob]

What’s the round bronze ball thingy that’s on the choke side, and hides behind the choke when it’s put together. Does it have a purpose or is it just blocking the fuel. Because mine is goners

[@seanschiralli8909]

Nice video I replaced my pilot jetts an main plus main base however I'm still sputtering an ideas. Thanks in advance..

[@bruceschmitz1984]

I have a 125cc venom quad brand new .Have problem starting I use choke when cold it takes a few cranks starts but if touch throttle it quits and I notice fuel coming up in the cap hose .I set the air fuel at 2 turns and do the idle screw and some times it allows throttle but most times not as I say brand new quad.?

[@paulsomers138]

I have a kdx and it's backfiring on start up can't get it to run just had new piston rings and crank seals

[@zacktrejo785]

Straight to the point you didn't f****** talk no b******* in the beginning like everyone else.... Need more videos like yours Explaining something's

[@arnoldramos3947]

I’m having the same problems and I’m trying to change the jets on a keihin carb but not sure how to do it. It’s for a yfz 450. I was also told that the reason mine is bogging and can’t give it any fuel is because of elevation when I bought it and I’m trying to see if there’s any way to fix it. Help?

[@rrrrkoop2776]

got a 2007 polaris atv 500 efi. starts but bogs when adding throttle. replaced fuel pump, fuel strainer, injectors, everything fuel related all the way. no change, when i put my hand over the carb, air intake it seems to rev up fine. any ideas?

[@derwinkotchea3215]

Mxz 700 2001 starts n runs good and all of sudden it starts backfiring, changed choke lines, cleaned the carb too, just wondering if the choke has something to do with it, starts backfiring like crazy!