Mini Jet Boat Build Part 4: Fully Installing the Supercharged ROTAX Engines!! (Major Progress)

Boy the Jet Boats are looking AWESOME!!! Soon we will be jumping them!
Hot off the press CLEETUS SHIRTS!!! Grab yours here - www.cleetusmcf...
Our 2021 Sponsors:
www.holley.com
texas-speed.com
www.motionrace...
www.nittotire.com
www.summitraci...
heatwavevisual...
Check out our schedule for 2020 here - www.cleetusmcf...
Cleetus2 Channel - goo.gl/Ph2wyo
Holley's channel - / @placesholleypoops9094
**Social Media:
Instagram - goo.gl/LZvy5e
Facebook - goo.gl/gdwhh1
**SEND ME FAN MAIL... (bald eagles welcome)
Cleetus McFarland
12961 44th St N. Ste B
Clearwater, FL 33762
United States of AmericaThe first time we've ever been pulled over in either of these cars...
CLEETER T-SHIRTS!!!!! Grab yours here - www.cleetusmcf...

[@ViceGripGarage]

I see VISE GRIPS!

[@durkj3370]

A guy just loves it when his favorite KZbinr watches the same stuff

[@genesisaltitudes1139]

Lmao love the content vice

[@ViceGripGarage]

@@durkj3370 🤘

[@ViceGripGarage]

@@genesisaltitudes1139 Thanks man, appreciate it!

[@vitsimies]

The forgotten Chevy s10 video was great! When will you do same kind of a video?

[@a.j.walton2073]

“ its a little brisk for us Floridians today its like 50 degree today” must be nice

[@jbro507]

“It’s freezing!” Me: laughs in Michigan

[@tylorcousins8212]

Dumped 10 inches of snow here in 9 hours so far

[@HAKAMALAKADEEKYDODA]

Yeah no kidding -15° C here today -22 with wind chill

[@a.j.walton2073]

Shit I got it easy its only 36 in Oregon 🤣@@HAKAMALAKADEEKYDODA

[@devinsmith6523]

@@jbro507 Laughs in Wisconsin

[@DoubleClutchProductions]

This dude just said "Its not like your going to go top end these things"

[@That-Guy.]

He must be new around here

[@Mr04291965]

@@That-Guy. Ya think ?? Hahaha

[@joshs199]

😂🤣😂 he's definitely going wide open first time.

[@jessecoc6247]

You are not gaining a lot on 2strokes with new heads🤣

[@RB-sy9gb]

There’s enough room for an LS in those boats, how was this opportunity overlooked?

[@BeardRobert55]

wayyy too heavy for such a small boat, also there is more stuff to go into that area.

[@zacharymacclure9910]

Think thats what everyone was expecting lol. But these are fine

[@SantaClaw]

An LS, even with turbo's will probably have less power to weight that that thing, those marine engines are made with "limitless" cooling in mind, so it's got crazy power for it's size, and it weighs almost nothing

[@dillee9988]

Higher revs on a jet boat is more important than power. I have bigger jet boat with a 3lt V6 engine but I'm looking to put a gearbox to up the jet revs for more speed.

[@Me-fj8sb]

You can make out those rotax a ton of bald eagle, at least 300 hp turbo or supercharged with the right tuning, thats like 500 hp in a LS, just wait for it,

[@Timman57]

You guys should make a shirt that says, "Tall & Taal: Speed and Marine" lol

[@edgerat]

YES!!!!!!!!!!!!!!!!!!!!!

[@Nigel_THFC]

I get the Tall and Taal part of it but you lost me with Speed and marine I don't get the joke????

[@davidbrinton02]

"Taal and Taller Racing"

[@Timman57]

@@Nigel_THFC I mean...a speed and marine shop...like...fast cars and fast boats, kinda like Finnegan has I think his is called "Finnegan's speed and marine" only joke is the tall and taal part and have a pic of a giraffe in a boat or something lol

[@joeysgarage7963]

I would like this comment but it's at 69 so I can't

[@waynebake1123]

You know what they say: The bigger the glob, the better the job.

[@maibemiles3904]

That’s what she said!

[@ELRman86]

Sounds like an AVE quote

[@Avetho]

@@maibemiles3904 What, a higher chance of success? XP

[@austinwolfe7295]

DEWCLAWW!!

[@Lunch_box]

I have that hoodie 🤣 AvE is my favorite KZbinr

[@Spacecadet3890]

I thought when you said porting a wild Jeremy would appear

[@KJ-kw7gh]

Lol, yeah, poking his fingers in every orifice he can find.

[@ralmslb]

Oh man, that engine is a lot tinier than it looked inside the Jetskies

[@tunanocrust2642]

haha right, when you think about it, that motor is literally between your legs riding a jetski, they really arnt big

[@braaapattack2937]

If it’s the motor I think it is, it’s only 900cc or 1300cc

[@GTROLA]

@@braaapattack2937 These are 1600cc, the sparks have the smaller engines.

[@braaapattack2937]

@@GTROLA ah, I know the sparks are 900’s as the same motor is used in their snowmobiles

[@dmitrysavonin770]

"Long as it smoothly goes in and out" James: *chuckles* *camera cuts* I just want to know what was said after the cut 🤔

[@androidas79]

I bet $20 it was "That's what she said"

[@relaxingdrives6075]

Just some dirty...greasy things

[@Chrisdauria23]

Does that guy know who he’s talking too “its not like your gonna top end these things“ lmfaooo🤣😂

[@archangelspythons]

Might not be a way to top end them. I know Jack about jet ski engines though

[@chrisharding2813]

Don’t let this distract you from the fact that Hector is going to be running three Honda civics with spoon engines, and on top of that, he just went into Harry’s and bought three t66 turbos with nos, and a motec exhaust system.

[@GodlikeIridium]

You watch too much movies mate^^

[@chrisharding2813]

I dont even know what movies are... i just know that Hector is preparing for something.

[@marcusborderlands6177]

@@GodlikeIridium you ruined the joke mate

[@SonyFoLife]

"we got Chris Angel and JP" [M I N D F R E A K]

[@dakotapate2315]

I’m so happy someone else had this thought

[@jimbobskinflute2878]

I was waiting for it haha

[@colekynerd5398]

Lol James, “you can put nitrous on anything”

[@lastnamefirstname9043]

Fastest thing ever down the 1/4 mile is a peroxide powered rocket dragster (3.58s@386.26mph) Can't put nitrous on that and nothing with nitrous will ever touch it.

[@MrDJAK777]

I mean you could, nitrous is a wonderful oxidizer and has been used as the oxidizer* in rocket propelents blends before.

[@lastnamefirstname9043]

@@MrDJAK777 it's hydrogen-per-oxide. There is already one oxygen per hydrogen. What's that oxidizer going to do when the fuel is already an oxidizer?

[@NBSV1]

@@lastnamefirstname9043 It may not help, but you could still put it on there.

[@NatedoGP]

@@lastnamefirstname9043 just make a rocket with nitrous as the oxidizer instead of peroxide

[@coolk1d917]

Sounds like my daughter, what's that do, what's this, what's that? 😂 Honestly have no idea what I'm looking at

[@Hooligan6]

So glad you guys connected with JP Racing, every single ski he touches is a certified RIPPER!

[@sprayonbutter1038]

✅

[@LandonClimbs]

Absolutely

[@AkashKumar-rl1jc]

“It’s like 50” Bruh it’s like 20 something up here in Minneapolis

[@Miley_00]

Here in commiefornia it was 62 at night and 84 daytime a few days ago

[@mikehawk1673]

Lol I’m from south Florida leaving to go up to Minneapolis in two days 😂 gonna suck

[@haydenwiseman3056]

it was 46 this morning here in florida. time to remote start the car and put a jacket on! the problem with Florida is it will break 100 in the summer so yea

[@rawaqadir2932]

Bro today is super nice up here in washington 45 where im at

[@nathanbutler8240]

@@haydenwiseman3056 thats texas lol our fall is basically summer and winter mixed 40° at night 90° during the day then summer hits and its 105° with 95% humidity lol

[@UrbanHillbillyVideos]

That thing is going to be FUN.

[@genemounce8302]

300hp, 300lbs. #ITLLEAT lol

[@jeffreybamford7365]

You know they will line them up for a race ...

[@SpocksBro]

Those suicide boats are kinda worrisome to me. Don't want my favourite mulletboy (Cleetus) and cowboy (James) to hurt themselves.

[@GARAGEIdiotS]

Your sealant laying skills are that of my own. Lots is more betta

[@Fuzionjay2]

Did this guy really just say “it’s not like your gonna go out and top end these” to cleetus lmao I disagree

[@rtx447]

First time out it'll be fully sent

[@Fuzionjay2]

@@rtx447 that’s what Im saying man

[@Tyler-10]

Next month on the Cleetus McFarland KZbin channel: “Putting a built Texas Speed 427 in my jet boat!! TWIN TURBSKIES”

[@Whitehorsewelding]

It would be like a miniature version of Finnegan's drag boat

[@sladeb6036]

We can only hope

[@Tyler-10]

@@Whitehorsewelding that is definitely true and would be very cool

[@meltedmindmedia9415]

Can't wait for these to rip on the water for 5 minutes and then sink

[@bran2654]

Lol maybe not

[@Miley_00]

What a loser.... What bridge do you live under?

[@michaelshafer2996]

The one thing everybody wishes to get rid of on a seadoo is the carbon seal and they put them on these boats 🤦‍♂️

[@natoalvarez5762]

I'm a city fellow from Los Angeles California can you explain this please I've seen it all in the comments

[@triggeredhondaboy8648]

Video 12 of asking cleeter to do driving underwater part 4

[@ChrisG1392]

Here for it

[@philb5593]

I want it too. But it ain't happening any time soon. As Cleet said on the livestream, the engine is the tracker is completely junk, seized up from all the water in it. He said they want to put a diesel in it, but with how much is going on it just a low priority thing.

[@triggeredhondaboy8648]

@@philb5593 yeah I'm just here to make sure it doesn't stay on the backburner forever

[@trolllololololo]

@@triggeredhondaboy8648 feel you

[@dylanfoster5078]

You’ll have that on these big jobs lol. sounds like a union man.

[@apprenticeforeman1866]

Haha! Came straight to the comments, knew I’d see this down here. IBEW 613 ✊

[@11jeopardy11]

I think your right to moan about it being cold is revoked when you are wearing shorts

[@bobbystalder3323]

Hey cleet what you did for that boy Luke warmed my heart brother....👍👍 Awesome man

[@NoWr2Run]

I actually started too cry, a 55 year old man. That was great GARRET, TOUCHED ME DEEPLY.

[@The_sinner_Jim_Whitney]

The more I look at these boats, the more I want to build one.

[@NerdyMeathead]

Finnigan must look at this boat engine install and think it's the cutest little thing

[@Snickers1976]

man i love the bond between cleet and james they might as well be brothers at this point

[@mastermachineman1462]

James Bond

[@averyevans2761]

I was looking for the "you're doing it wrong" comments but I guess I'm too early

[@electricdeckhead3083]

you gotta get over here to South Australia and check out the Dinghy derby, you guys would love it.

[@shannonspear8751]

Loveday South Australia 🇦🇺 in da house Yee Yee

[@electricdeckhead3083]

@@shannonspear8751 Loveday, woohoo, used to be an annual for me just up the road at Cobby I used to stay. love the riverland region, my father grew up on the Murray.

[@shannonspear8751]

@@electricdeckhead3083 could you imagine Cletus the Giraffe 🦒 squished up in a dingy derby Tinny lol or would he be the swing man hanging off the front

[@electricdeckhead3083]

@@shannonspear8751 it would be a sight to see, I would swing for him.................. hang on that sounded a bit gay.

[@shannonspear8751]

@@electricdeckhead3083 yes I know him what’s his name again that’s it Acoustic Deckhead lol

[@southhigh9]

If only McFarland fabrication was around for the titanic build it probably still be afloat

[@replynotificationsdisabled]

Doubt that iceberg would give two phucks

[@cassiusdante2216]

Titanic sank because they packed the haul full of explosives. Set it when they rammed the iceberg.

[@warrenmichael918]

i wonder if they woulda LS swapped them boilers and had Jack and Rose off the back in an inner tube or set of skis?

[@Charlie-gx9lm]

I sell sikaflex 291i at work, Good luck if you need to remove any of those parts 😂

[@Cody_4]

James: 😏 “You can put nitrous on anything” 🤣😂

[@replynotificationsdisabled]

They need two engines in there. Three for extra measure.

[@Boganasf]

Just remember there going to giving it upgrades

[@ethankliewer5628]

"you went X-Games mode on that finesse" ol' jack stand Jimmy's got jokes 😂

[@Jessemarshall232]

4:56 lol, explains how sensitive carbon seals are...while slapping the carbon seal together

[@randbaldwin]

Holy crap that's a lot of goop! LOL.

[@Juicejunkie409]

That's funny I just watched the video of JP racing doing the jet skis for you guys good stuff keep up the good work I love when all the KZbinrs get together fun times

[@markbarlow4918]

Nothing like smashing mechanical seal faces together. 😂🤣

[@ZacKRivard]

Came here for that. Tell that guy if he knew how to treat a mechanical seal they wouldn't leak.

[@midship_nc]

that cheap ass stainless stationary is hilarious.....need some silicon carbide/silicon carbide to deal with sand and silt crossing the faces. Its a shame the manufacturer used a 20 dollar seal with rubber bellows for the pump, of which they probably want 300 bucks for lol. Stainless potentially in sea water? lawl

[@daykielfernandes4677]

JP in the house 🥵 if u know u know the king of jet ski

[@michaelbrown5601]

James is rocking his Fargo winter ensemble lol

[@Tim_the_Astronurd]

thats pretty much the exact same outfit I wore today with the addition of a dickies vest! (I live in Fargo)

[@sergeantplays4413]

Damn I didn’t know Chris Angel worked on engines

[@srirachasauce8430]

Hell yeah

[@budddove6480]

JP- its not like your guna go out and top end these things..... Cleeter- Umb, SCUSE ME!!!!!!!

[@Truckerbot]

I can tell you weren’t a birthday cake decorator in a past life 🇺🇸

[@6181green]

Shoutout to JP racing for making sure everything is done right yee yee👍👍👍

[@vulcandawg7623]

50 something is shorts and short sleeve weather for me.

[@Hoaxer51]

You must be from Ohio also, lol!

[@babyboom6574]

@@Hoaxer51 Same here.

[@ryubiggie]

It hits different with low altitude and high humidity. So much more air to suck the heat off you. It chills you to the bone much easier.

[@vulcandawg7623]

@@Hoaxer51 massachusetts

[@Kasper0127]

When’s the race against Finnegan’s Game Over

[@ardakaraoglanyan6319]

One of that boat should have been "K" swapped!!! xD

[@BriceBeak]

Just wait for Kyle to come thru

[@JustAPatriot23]

Wrong channel

[@ardakaraoglanyan6319]

@@JustAPatriot23 Reason?

[@TheJeracuda]

lol Kyle just showed up to check out your setup so he knows how much bigger he needs to go when he gets his own jet boat

[@loganb9265]

Jp for the win and if you haven’t seen monstermax #2 Cody is a mad man 😂

[@Lunch_box]

3:35 you bastards I checked my phone to see my notifications before I realized it was the video

[@aaronh5567]

"It's a little brisk out, like 50 degrees or something" *laughs in Washingtonian*

[@seudechrist]

Hears you laughing in Washington *laughs in Saskatchewan

[@aaronh5567]

okc 306 alright you got a point

[@trolllololololo]

Laughing in Scandinavian.

[@lammruss]

Laughing in Seattle

[@frasertones8519]

It's no wonder Covid is raging in the states. You guys need to take a fucking break.

[@tspence25]

No kidding

[@thaidangable]

"Its freezing in here!" **Laughs in Canadian**

[@peterdavison9901]

I don't know the first thing about Jetskis and yet I recognize these dudes, clearly they are doing something right 😂

[@jamesb4153]

10k views in 9 minutes wth

[@gr8daddy682]

Awesome to see Cleet is sweet on the Canuck go-fast equipment...BRP/Can-am rips and southern boys now know what Canadian folk have known for years!

[@patrickthomas3859]

Y’all need a bigger shop

[@donnieporter7890]

Thise boats are gonna move.. there a guy name josh james kiwi bushman on YT that has one he's in New Zealand and the beat those boats up cool as hell check him out

[@camochris9638]

Anyone who knows about carbon seals had to cringe when he was touching the seal with his bare fingers 💀😂😳

[@sladeb6036]

I don't know anything about them but the way he clack them together kinda made me cringe

[@warrenmichael918]

from the way he was talking about the scratches leading to cracks, i bet they replace them before the final install of the engine.

[@JM-yx1lm]

I dont know anything about carbon seals but the way he called them crack made me clench

[@CodyUnderstorms]

What does touching a carbon seal with your bare hands do to them?

[@camochris9638]

The oils from your hands aren't good for the carbon seals, it can cause pre-mature failure. Best to use rubber gloves and coat them with dishsoap before install.

[@kljcails]

After a month you're going to get bored, throw a big block 454 in it 😀😀😀🍻🍻🍻

[@geogmz8277]

Not gonna lie I was expecting these to be K Swapped.. But this set up looks good..

[@Avetho]

This is faster, these engines are "water cooled" so they're much lighter, like when are you ever gonna run these on land when they ain't going nowhere XD

[@michiganengineer8621]

What makes you think they're "finished" with this project? I'm expecting to see a turbo-supercharged K-Swap with NOS before they're done playing with the Jet-Boats!

[@JustAPatriot23]

Wrong channel. LSX

[@michiganengineer8621]

@@JustAPatriot23 I'm sure they'd like to cram an LS in there but not sure they could squeeze one in. Jeremy's an LS guy from way back and he's lovin that Kater-Tot of his!

[@mailehall5109]

Dude I love 50 degrees beacause I live in Michigan and it’s currently 15 degrees

[@cmwhetst]

00:25 when you said Chris Angel. I thought the magician was going to pop out and instantly remove the engine, with glitter.

[@95flareside1]

Glad I'm not the only one thrown off by that...

[@98durangopack]

I'm going to go ahead and say... I see a motor swap in the future on these. Its not enough..

[@_Otaku-kt8be]

Those engines are so small I'd find a way to put one in a go-kart if I could.

[@Nigel_THFC]

It's hard to explain but those engines wouldn't last 5 mins in a go-cart because they are built to go fast in water so if you put it in a cart the engine would not be able to handle the

[@garyhowe88]

@@Nigel_THFC please explain? As I can't think of any viable reason 🤣

[@michaelshafer2996]

@@garyhowe88 He has no idea, They weren't even built as a marine specific engines as Rotax builds engines for all types of stuff

[@paulcrocker4553]

McFarland speed and marine, just need a box ramptruck, I'm sure Finnegan can help with that!

[@MrLefizal]

3 Views, 142 likes, 0 dislikes. Hell Yeah Brother

[@TheRMMFilms]

0:25 he got chris angel working on the jet boat bout to make some magic happen

[@Zaneagee11]

People commenting before they even watch the video 😂

[@mk3249]

The charger is off in the thumbnail 🤫

[@hartrods]

0:25 he said Chris Angel, I was like are these boats gonna fly, walk a highwire or turn into submarines...

[@leeman1790]

Who told you to seal that pump like that lol. Wtf

[@grabsme]

"go a little counterclockwise" okay YEET

[@nit4swede503]

Mini Jet boat Titan-ich Build Part 4 .... ;-)

[@zippySquirrelface]

"Rob some unnecessary power" vs "unnecessarily rob some power". Different meaning to the same words.

[@MohrRacing2]

Lmao I thought he was putting both engines in the same boat 😂😂

[@RedWave610]

You can put Nitrous on anything.......🤣🤣

[@coreykimbler5188]

50 somethin' LAWL! i really wish it would be 50 anything here, it stays about 35 here in ohio buddy!

[@Chukkie1967]

How did i know JP was going to show up on this build...

[@MustangLogan17]

i drive an hour to work in a ‘66 stang with no heat in 23 degree weather, and i have to roll the window down because my breath freezes to the window!!

[@NoWr2Run]

Been there BRO. 68 Camaro same thing, LOVE THE CAR THOUGH. STANG ON SIR.

[@605gritfitness9]

Please wrap the thing like a Mountain Dew can!

[@derklamore9623]

Cleetus: "Can you run nitrous through the stock block?" Jetski pro: "I mean you can?!" Cleetus: "All i needed to know thanks."

[@mitchblackmore5230]

Damn, what a process!!!

[@coreyv156]

Put a boat tower on them/ wakeboard tower

[@hectico906]

Ooohhh snap JP in the house!! Noiceeee

[@Mrdoctile]

@3:35 how many check your phone??

[@outen21]

I’m ready to see these on the water 🇺🇸

[@jeremyvigil4138]

Was just watching willkies channel n his jet boat. It's crazy how much stuff goes into these things

[@sam_s_]

You have Criss Angel?

[@ColinMcEvoy]

in the words of of the almighty Donut man himself James Pumphrey.... MO POWA BABEH

[@haydenlange5198]

Should’ve put the go-cart engine in the boat

[@dandangerous935]

The fuel tank and the battery should go in the front.

[@ABCRZF1]

"mines already in the back of their truck" 😂😂 So quick. So clever.

[@shadowsandfire]

lol when we talk "50 somthing out" here its freekin hot as we use Celsius not Freedomheit here

[@gogetem188]

THIS IS A JOKE RIGHT man i am a little confused WHY NOT PUT A 12B OR 20b ROTARY A JET-SKI ROTEX hmmmmmmmmmmmmmmmm NOT SHORE ITS GOING TO RIP HARD I thought you guys were FULL-SEND BEASTS maybe not i get it ya want a boat like driving MISS DAISY haaaa lol

[@mk3249]

I’m so pumped for these boat ... BUT GAWD DANG THATS ALOT OF WORK

[@gmanbeavis]

Brisk LOL! Poor baby... I was in Clearwater over Christmas in a tshirt and jeans while people were wearing scarfs, toboggans, jackets, and gloves lol. It was 13 degrees in PA at Christmas.

[@brandonatwood8409]

SIKAFLEX!!! 🥰 As a career marine repair tech, I’ve shot a buncha tubes of that stuff! When you do decide to pull that thing back apart, you’ll bend the flange all to heck if you try to manhandle or pry it off. The trick is heat, Sika softens and breaks down under heat. 💪 stuff is freakin bulletproof otherwise!