Spoon bracelets made simply

[@donnasvt1]

Can you do a video on making your jig?

[@gregtanner584]

Sorry for the long delay on responding, I really don't get on here very often. The jig I made out of this around my garage, the main barrel is a 6" long piece of steel pipe, I cut the threaded ends off. The case can be anything solid metal, a piece of flat steel is fine. Used a 3/4" hexhead bolt, used a 1 1/2" flat washer on top, put the bolt through pipe, another flat washer, through base then a lock washer and self locking nut, then about 1/4" away drill another hole for a 1/2" bolt and threaded base plate, put bolt in leaving about 2 inches tall and cut bolt off and used vinyl tubing to protect silverware, then I just use the nut on bottom in vise to hold.

[@patwinter2659]

do you sell your jigs?

[@mildred6305]

greg tanner Beautifulll Work 🙌😍 thanks

[@nancelee3535]

@@patwinter2659 I would love one too

[@kristincochran4658]

I'd like to buy one too. Let us know

[@sheilaboop3284]

Thank you! 😊

[@evelyngorman5584]

Can you show how you made the jig? What size pipe do you use?

[@bonitatanner3984]

I will let you know if still interested. This is Greg wife Bonita. Great way of starting out.

[@amiasmileface9981]

What can you use if you don't have any facy metal-molds to make the U shape with. What tools would you use?

[@christophergonzalez5653]

I want to make a jig like that with my Everlast welder.

[@009656g]

Do you have a website where you sell your jewelry?

[@ranamike104]

How did you make your jig?

[@debbieglenn-mh2uh]

What r you using for the jig?

[@gregtanner584]

The round part of it is 1 1/4 steel pipe nipple, I then drilled a hole in a piece of flat steel plate used long bolt and nut to secure together and drilled another hole about a 1/4” away from the pipe and put a smaller bolt to slide spoon or fork into to hold flat against pipe to bend. Hope this helps Greg

[@debbieglenn-mh2uh]

@@gregtanner584 thanks so much

[@annasanders8401]

Easy! Thank you!

[@deletemeyoutube8885]

Is that a house jack?

[@ybsisKaren]

Need to have the camera closer.

[@SilkCityIndependent]

Could we please have a close up and description of the jig?

[@bonitatanner3984]

Hi, let me get my husband to answer.

[@bonitatanner3984]

He is going to go take some closeup pictures and another video of how we do it. I is really easy once you get the hang of it. No need in buying the expensive equipment, plus the press just to make jewelry. We will show more a curate step by step info.

[@SilkCityIndependent]

@@bonitatanner3984 awesome! Thank you. 😁👍

[@bonitatanner3984]

Got very busy today with "Life". He will get up the info Saturday evening!

[@Trixwashere]

Edging

[@gilleslemieux8100]

Un