Spoon Sports Catalog Honda Civic Type-R FK8 Carbon Fiber Front & Rear Bumper Painting & Installation

[@ahcgarage]

For AHC Garage Apparels and Merchandises: ​acurahondaclassic.com/​

[@anthonygomez8472]

Nice car bro!

[@STYLITALWAYS]

Most car guys aspire to find shops and individuals who will put the extra time and effort into their customers cars the way that you guys do. The attention to detail and all your work is top notch. Keep up the phenomenal work

[@ahcgarage]

Thanks for the compliments. Much appreciate it

[@moneebmirza7028]

The Spoon rear bumper fixes ALL gripes with the plastic fake vents anyone can have - looks simply amazing.

[@ahcgarage]

Couldn’t agreed more

[@leochiu5936]

The Spoon kit looks Way WAy WAY better than the overstyled OEM bumpers!

[@ahcgarage]

👍🏼👍🏼

[@jayman4268]

Did you see how much this cost? Let's not forget its a honda civic...

[@idk-lk1gn]

@@jayman4268 but it's not a typical civic it's a type r

[@416rides5]

Honda CL1 Euro R >>>>. m.kzbin.info/www/bejne/pofQZ42gl9BrrKM

[@ssjliano9971]

@@idk-lk1gn kinda annoying like bruh let us like our cars 😂😂

[@darensky]

So satisfying how absolutely nothing is even close to being half assed. Very calming for the over active ocd receptors in some of us....lol

[@ahcgarage]

Thanks for the love

[@amyjeffs3269]

A very valid point.People spending this kind of cash, on extremely expensive parts, and cars ,deserve the very best finish possible .Very difficult to find people who treat other peoples possessions ,as there own.But these guys are utter pros. Must be so reassuring for the customers,and no doubt the reason these guys have such a good reputation....Fine work.

[@ahcgarage]

Thank you so much

[@andysgaragetherapy]

You guys normally do some really great work, but this build was so amazing! A real pleasure to watch!

[@ahcgarage]

Thanks so much for the compliments 🙏🏼

[@faisaladi4822]

the whole painting thing is so satisfying to watch

[@ahcgarage]

Thanks for watching

[@didiermejia780]

The rear looks soooooooo gooooood.

[@ahcgarage]

Cheers!!!

[@milop8808]

Great job! Would definitely have you work on my car with the OCD level of detail. Great to see people that take pride in the work they do.

[@ahcgarage]

Thank you 🙏🏼

[@PSDrew]

Love the attention to detail on making sure no oils, contaminants, etc. are on the bumper pre-paintjob

[@ahcgarage]

Thank you!!

[@fromscla5883]

You guys are my type of guys that I wouldn't think twice about when working on my car. Pros!!! 😎

[@ahcgarage]

Thanks a ton!!

[@Popcorn8Caramel]

these bumpers are so much better than the original

[@ahcgarage]

Cheers!!

[@gasworksmedia6621]

Found your channel from this video popping up on my recommended. What a clean install, fantastic workmanship, no bullshit approach and very detailed video. Top job props +++

[@ahcgarage]

Thanks for watching and joining us

[@thesupermut]

Patience is a skill brotha and your patience turned out a beautiful work of art.

[@ahcgarage]

Thank you! Cheers!

[@jimmysapien9961]

AHC. Omg you people got it together . Also I Noticed how you all put the Front and Rear Bumpers on a Correct Stand instead Of the raw Floor . Attention to Detail is what I’m talking about you guys Rock and Roll 👍🏻👍🏻

[@ahcgarage]

Thank you very much!!

[@j.3854]

Massive thumbs up dudes. The car looks sick and the videography is excellent. Love the simplicity of the Spoon vents vs OE.

[@ahcgarage]

Thanks so much 🙏🏼🙏🏼

[@downdirtydetailing5127]

Love my spoon products but I'm very impressed with the workmanship and attention to detail from you guys! It's not often you see people taking their time and assuming proper measures to do it right once!

[@ahcgarage]

Thanks for the compliments 👍🏼

[@BostonFishin]

Sick. You guys did a great job with this install. I was undecided about that two tone front bumper but it came out better then expected 👍🏽

[@ahcgarage]

Thanks for the compliments. Two tones gave a good contrast on the Championship White

[@ramonbriones4487]

Man I've been dying for sumbody to do this kit!! When the video first started I was confused lol..I'm like 🤔 then y'all showed the new goodies and I was like 😍great stuff!!

[@ahcgarage]

Thanks for watching and your support 👊🏼

[@ing.eduardopena5848]

There's is a huge skill right there for sure. Congrats on the awesome work done. Simply amazing.

[@ahcgarage]

Thanks for the compliments and support

[@ObiWanStromboli]

Been eyeing getting these parts for mine and I don’t think I could take it anywhere else but here to get it done. 🤣

[@ahcgarage]

Haha, thanks for your support.

[@8power0]

HY THAT WAS THE BEST,,, YOU GUYS NEED TO PUT OUT MORE CONTENT IM SHARING THIS WITH EVERYONE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[@ahcgarage]

Thanks so much for the support

[@bigguwapbrixks187]

Spoon never disappoints !

[@ahcgarage]

Facts!!

[@davidk4190]

if i had the money, i know what id be driving. so nice to have toys like this one. just get rid of that park bench on the trunk go oem.

[@BboyMobster]

You guys are the best! The spoon kit to me looks so much better than the mugen one for these cars.

[@ahcgarage]

Right on!!

[@GS-sm3jo]

Been looking forward to watching all day.....here we go!! AHC👍🏻

[@ahcgarage]

👊🏼👊🏼

[@corone2018]

What a beast brother , what a beast . it just gets better and better

[@ahcgarage]

Thanks for your support!!

[@barnaphon6754]

Awesome video. That spoon kit is stunning

[@ahcgarage]

Thank you 🙏🏼

[@JohnWD40TC02]

Fantastic finish guys, Brian did an awesome job painting the bumpers I saw the video on his channel. Honda has come a long way in recent years, I remember back in the 70's and 80's Honda was a poor mans car and the quality and finish was awful but now they look top quality and first class style. John UK

[@ahcgarage]

Thanks John

[@94AccordAW]

Really? I've seen a lot of late 80's Honda's still on the road and the fit and finish seemed pretty good on them. I can't speak for the 70's ones. I know 90's ones are excellent too.

[@zeeshanhaque]

Front and Rear Bumper look really good! I honestly prefer the Mugen Taillights

[@ahcgarage]

Agreed, great looking bumpers. The owner like to keep everything Spoon. But yes, the Mugen Led taillights are pretty awesome

[@bluenote125]

Very satisfying video. All professional install too

[@ahcgarage]

Thank you 🙏🏼

[@derekb370z]

Would love to see more FK8 and NSX content. Keep up the good work

[@ahcgarage]

Will do. Thanks for your support.

[@Jamess17065]

Hands down Best in town... You guys did it again

[@ahcgarage]

Thanks so much!!

[@ClaudioVidalDias]

Great attention to detail. Great work guys! Kit looks pretty cool

[@ahcgarage]

Thanks for your support!!

[@ChrisHondaProductions]

You guys are amazing what a professional install!!!!

[@ahcgarage]

Thanks a lot. Took us some time but we are very happy with the result.

[@ChrisHondaProductions]

Beautiful results!!!

[@ahcgarage]

🙏🏼🙏🏼

[@NCLme]

Well Built boyz...Loving the Spoon front and Rear bumper and that Wing looks Killa, it goes well

[@ahcgarage]

Yes sir!!

[@feliiiik]

amazing work on the paint. On the last sand before the final layer of clear, what grit did you use?

[@PaintSociety]

600

[@jakubM3]

the spoon catalog basically costs the same amount as a type r, so much money

[@thepassionofthegoose5472]

All well spent. Honda gave us the Type R as a base at a reasonable price point.

[@jimmysapien9961]

@@thepassionofthegoose5472 true but Dealers Mark it way up !!!! I should know . Not much one can do really .

[@macmac989]

Unlucky MURICA no mark. Ups here where i live over the pond!vote with your feet the dealers shouldn’t be allowed to extort would be cheaper to do a personal import

[@Badged5]

very good video on detail process, it's been a pleasure to saw the process sir..

[@ahcgarage]

Thank you 👍🏼

[@nYdGeo]

It's beautiful and I absolutely prefer the Spoon front end. While I prefer the look of the Spoon rear bumper, I wonder about rear-end lift at high speeds due to the lack of diffuser area compared to stock.

[@ahcgarage]

Thanks!!

[@AutotuneIndonesia]

Nice!! I like this... Your work is better, very carefull, and perfect finishing... Thumbs up from Autotune Indonesia dude...

[@ahcgarage]

Thanks for your support

[@llll1526]

Excellent job guys. Paint is awesome.

[@ahcgarage]

Thanks 🙏🏼

[@israelmedina706]

Mark Ruffalo did an excellent job with the paint

[@raver208]

Yes! Fully perforated meshwork in the rear bumper. Finally! Always hate the faux-grille honeycomb plastic on the 10th Gen. .

[@ahcgarage]

Cheers!!

[@retroguy1976]

love how it pops after the paint looks good otherwise

[@Seikers]

Dam removing these new bumpers look like a lot of work. Old Honda's are so simple! My integra only needs a couple bolts and clips and its out.

[@ahcgarage]

Yes, it’s a bit more involved with the newer models.

[@kmpaton]

Dang, you guys are near me in Orlando. The only issue is I only own Subarus, but your EK Type R video makes me want to seriously look at importing one.

[@ahcgarage]

You are only a few hours away from us. We host car meets often in Orlando. EK9 is an awesome car, you should do it!!

[@tommycr-zsportcarssupercar2826]

So beautiful SPOON FK8

[@ahcgarage]

Cheers!!

[@MrMountainHawk]

Another great video!

[@ahcgarage]

Glad you enjoyed it, appreciate you!!

[@416rides5]

Honda CL1 Euro R >>>>. m.kzbin.info/www/bejne/pofQZ42gl9BrrKM

[@underarmor5010]

Pretty incredible!!

[@ahcgarage]

Thank you 👍🏼👍🏼

[@zeeshanhaque]

Nice car! Could you tell me what's this background music playing in the first 5 Minutes?

[@ahcgarage]

Fire it up by Damma Beatz

[@usuisou]

I'm learning to spray paint my car parts. No primer?

[@prm5798]

Can you guys get the left and right oem engine covers?

[@17.06.Copper]

I never knew SPOON were making flexible draw stiffeners like STI 🤔 seems PROVA is also doing the same. There's seems to be a shift form JDM tuners with these chassis upgrades that don't just consist of stiffening but combines ridgidty and flexibility.

[@jimmysapien9961]

Again AWSOME installation… Front an Rear But - Some States Require Front License Plate ! What can you Advize ??

[@ahcgarage]

You can attach the front plate to one of the front grill inserts

[@jimmysapien9961]

@@ahcgarage FYI. I JUST FOUND A site called evasive motorsports they have a tow device that bolts up behind underneath the fender right beside the fog light it has an extension for a toe ring and they offer a license plate set up with the same toe ring rod- Check it out !!!!!!! Very Sturdy

[@PowerLodgeFLVideos]

what exhaust is this ? also ive never seen underbody of a car so clean its like it never gets driven

[@ahcgarage]

It’s Spoon Sports exhaust

[@jerryreid813]

Beautiful car and workmanship. What are those Spoon devices mounted on car underneath and under the bumper for?

[@ahcgarage]

They are the Spoon Motion Control Beam. Improves handling, comfort, reinforces the body and absorbs small vibration

[@jerryreid813]

@@ahcgarage Ok, thanks.

[@ciello___8307]

The spoon rear bumper is so much better than stick

[@ahcgarage]

Agreed!!

[@diazepamrx6799]

How did he install the spoon wind shield

[@berhonceline]

My dream car.. Nice setup

[@ahcgarage]

Cheers!!

[@mappyfrappy]

Impressive. Nicely done.

[@KBOY1]

Front bumper color scheme reminds me of the current gen. Camaro SS front end...

[@barrondeville1866]

Looks so much better than stock, I personally hate the fake vents. However with the cost of the Spoon front and rear bumpers and the cost of labour involved for the install you are looking at spending over $10,000

[@Jtbg80]

Wonder if you could go with a 3 outlet exhaust design with this rear bumper or if you have to have a 2 outlet exhaust

[@ahcgarage]

Greddy has a 3-tips design on the fk8. Looks very nice

[@NEPALESE.AMERICAN]

We need more TL TYPE S CONTENT!!!

[@ahcgarage]

In progress. Coming up real soon! Thanks for the support.

[@LockdownuG]

What intake is that? dry carbon looks fantastic!

[@tellytalk2479]

Nice job guys .. lots of work you put it .. but i came out bad ass

[@ahcgarage]

Thanks so much. Very rewarding to see the end result

[@paulbryan_photo]

Nice video! Question? Will the Tomei exhaust work with the spoon rear bumper??

[@tonyproenza3530]

Great job on the car guys!

[@ahcgarage]

Thanks!!

[@modyryan]

what an art piece

[@twenty8june121]

I love the rims. What brand it is?

[@ahcgarage]

Spoon SW388

[@mrcoco927]

what brand of airbox you guys are running, looks minth

[@ahcgarage]

That’s a Sprint Filter carbon intake system

[@frieddayfriday]

damn we needed some rolling shots!!!!!

[@ahcgarage]

We have really poor weather during the shoot of this video, perhaps we can on the next video. Thanks for the suggestion.

[@RaphaelYC]

You know how sometimes you see cars with aftermarket bodykits/ bumper it always get stone chips easily? is it because the quality of the paint/ not enough layers or is it because of the material of the bumper because most of them are made of fiberglass

[@ahcgarage]

Most aftermarket body kits come with a poor adhesion primer coat, for this particular kit we made sure to sand off any primer that came with it and apply our own materials to ensure a chemical and physical bond to prevent rock chipping

[@CHARGER08RT]

There is no way I could just store that beautiful piece of machinery, I would have to drive it!

[@ahcgarage]

Yes!!!

[@CHARGER08RT]

I am glad I get to live vicariously through y'all 😆

[@MSteveYang]

How hard would you guys judge me if i get this bumper on a 2021 civic hatch ex?

[@BernsteinOmega]

Sweet! Where's the grille 'H'?

[@ahcgarage]

Front Spoon bumper doesn’t have it

[@doctordyl3105]

I loveee the bumpers

[@ahcgarage]

Us too!!

[@TheHandsomeFrayser]

Wouldn’t the air intake box suck in water on Rainy days? Since it’s a direct feed through the grill

[@ChrisHondaProductions]

My dream spoon fk8 man life is unfair lol 😂

[@ahcgarage]

Ha!

[@xplizitremix]

What black color code did you guys use for the middle black section and the fog lights if you dont mind me asking?

[@impulse1971]

Good Work guys, very very nice ;)

[@ahcgarage]

Thank you! Cheers!

[@Zvhviry]

35:35 Is it just me or the newly paint rear bumper colour doesnt match the body? Its a bit extra yellowish. 😅 or lighting angle?

[@ahcgarage]

It’s the lighting

[@neubs1969]

yeah its slightly off, but then again most new cars are also off from factory

[@isaiah1998]

Where do you buy the front and back bumper at?

[@drumsforlife9474]

The clear white side markers are OEM?

[@ahcgarage]

Yes, JDM or EDM

[@jennam726]

Dream car 🔥🙌

[@ahcgarage]

🙌🏼🙌🏼

[@416rides5]

Honda CL1 Euro R >>>>. m.kzbin.info/www/bejne/pofQZ42gl9BrrKM

[@rebelliousgoat1557]

This car takes rice to a whole new level 😂 🍚

[@papaporkyl.l.c.2061]

Where can I buy those brackets that the song attaches to?

[@jlartistventures2941]

I would like to know where I can get/purchase the Sprint Filter Intake set up. Much appreciated. Thank you

[@tommycr-zsportcarssupercar2826]

Awesome civic type r spoon

[@ahcgarage]

Thanks for liking

[@michaelmontalvo1976]

Excellent videos

[@ahcgarage]

Thank you very much!

[@ital1489]

Will tri exhaust tip fit the rear bumper?

[@late_apexx]

Hey guys love the channel! Maybe you can help me in my journey to find which exhaust set up and rear diffusers are compatible with the Spoon bumpers?

[@JohnDoe-ox4bn]

Looks good, all you need is a BLACK ROOF ‘

[@ahcgarage]

Yes!!

[@billcivicsff6808]

Will spoon progressive springs for fk8 fit the fc1?

[@ahcgarage]

We are not sure

[@Rafuza]

What is the name of that sport rim? I forgot already, just thinking wanna change to that

[@ahcgarage]

SpoonSport SW388

[@arkham626]

you need that honda badge back on that new bumper lol. looks like one of those games that dont have a license for cars but yet they make it look identical to the real car without the badges. just my opinon though. Love the way it all looks though great Job

[@ahcgarage]

Good call!

[@jutco]

can the Spoon rear fit an FK7?

[@ahcgarage]

Not sure

[@yengxiong8892]

AMAZING!!!

[@ahcgarage]

Thank you 🙏🏼

[@royescobar4353]

what wing is that? im trying to get it for my civic

[@ahcgarage]

That's the Spoon 3DGT Carbon Wing