Sportster fuel level sensor and fuel filter replacement

[@RePeterPod]

thanks bro you saved me a couple mins when you pointed out the retainer on the bottom of the pump

[@frankcastle5294]

This is a fabulous vid and I just used it as a training vid to get ready to pull the pump from my XR1200 and replace both filters and figure out why the float is hanging up and showing false low fuel warning all the time. Thanks a ton my friend.

[@markschwarzbauer4555]

Thanks you so much! I greatly appreciate the video. It helped as this really isn't covered in the manual.

[@jimbeam992]

Looks frustrating enough to wanna try. Smart tip about the dirty fuels from every crappy gas-hole across America along I-40. Guarantee my scooter needs a filter change. Thank you for the great video.

[@brotherstanleo]

Great video! I will be doing this on mine now. Thank you for sharing 😊

[@logancook9065]

How much did the kit run roughly I see all the parts online but I need the same kit you got

[@TheHighConservative]

That newly installed fuel level indicator float didn't work when you first reinstalled it, did it? You need to finagle those wires a bit. They're messing with your mojo

[@harris8390]

My low fuel light stays on despite a full tank, and blinks as well. No issues with fuel delivery and the bike runs great. Safe to assume its the fuel level sensor thats gone bad???

[@kenniitran]

Thx for sharing. and I have a question. My 08 Sportster Nighter error code is P0261 which is fuel injector. Do you think I have tp replace the fuel filter and fuel pump as well like you did here.? I think the fuel inject is bundled in fuel pump and fuel filter which was the broken part in your video right?

[@lontejay9454]

Hey, watched your video and find it very educational! This is my learning tool "how to" thingie and has been for long time. Great job on the filter and level sensor. I have a 14 1200XL and I s'pose it is very similar to this unit. My light doesn't stay on as this one does but it comes on pre-maturely like still have 2-2.5 gallons remaining. So, I want to change my level sensor. I have only 8500 miles on it. Would you recommend changing the filter as well or no? I will get the gasket for the assembly to insure no leaks. Thanks for your hard work in putting this video together for all to learn how to save the extra cash. Am going to do this the first chance I get so I won't be gasing up too soon on my rides! Happy cruisin" everyone!! God bless and Jesus loves you, John 3:16-17 (KJV) Lonnie ~~~~ :o)

[@obfuscated3090]

Ethanol fuel is hydroscopic so do not leave small fuel tanks full of it for a long time. If storing an EFI motorbike filling with pure petrol is a very good idea. OTOH knowing this can get you bargains on used motorbikes when they won't start.

[@adnanyusof6]

My xr1200 jerking at low gear & low speed, is it cos of fuel filter?

[@v-twinbrothers2001]

As much as I’d love to help you I would have to see it to perform any diagnostics. I would suggest testing fuel pressure (assuming it’s fuel injected) and if it’s below spec, you could start with a fuel filter. Another good resource is Hdforums.com. Very knowledgeable regulars on there. Thanks for watching!

[@kenni411]

I take it you called Drag Specialties in order to get the correct parts and numbers to your model? I looked on the site it is doesn't list those parts.

[@johnnelson903]

Nice work. i have 2017 48..with 2.800 miles on the bike with the fuel light on all the time.. is it possible that my one is Broken..can you help

[@v-twinbrothers2001]

It certainly could be. It never hurts to remove and inspect it especially since we’re in the colder months anyway. Thanks for watching!

[@davidalexander8266]

Great info now I know I never want to mess with mine. Lol

[@sanderpena]

just ordered one from quantum fuel systems a complete drop in, everything new.

[@guglielmoamura4537]

Very good

[@muneeralbalushi3799]

Bro hope you fine from where i can get fuel sensor

[@robinc5601]

I took the pump out my Heritage to change tanks. That was a pain in the ass too. Why don't Harley just make the hole a little bigger??????????

[@phildiegidio4658]

I can’t imagine what HD would charge to do this. Almost seems easier to just replace the whole (expensive) fuel pump assembly. Too much grunting and groaning going on. But well done anyway.

[@kennylavay8492]

what did the kit cost you for what you replaced.

[@bhumin1]

from where you order these parts. I can't find genuine parts online.

[@v-twinbrothers2001]

We ordered these through our local Harley dealer. Thank you for watching!

[@enricogriego6568]

You forgot to include the wires to ziptie, wires could prevent the fuel level sensor move freely.

[@dirtedirte8771]

My 48 2013 Has the gas light issue I removed the pump assembly and the shaft that the float sits on is loose and the silicone or coating inside is worn n falling apart shitty

[@v-twinbrothers2001]

Ours was pretty bad too. Camera didn’t even show it all. Thank you for watching!

[@segov2860]

How very Harley, dismantle half your bike for a service part…. Cheers, need to change my filter to.

[@kennylavay8492]

gravity feed and lose all the electronic bull shit. harley screwed up when they went to injection. more money for people to spend that is what it is all about. GREED

[@0987-t4f]

And the filter is 120$

[@nap89best]

hi how much did you pay for the float? Is it possible that she breaks down often?

[@exexpat11]

@@0987-t4f $38 for just the filter or $85 from V-Twins for the full kit.