Spotlight - 2018 Silverado 1500, 4" BDS Lift, 20x10 -19's, and 33's

[@matthewriggan8469]

Fuller! Easy on the Pepsi!

[@11TGUN]

Please add a spacer to the back wheels. It looks awful when the fronts stick out further than the rears. I don't get why people leave it like that. Otherwise... big fan and I'm looking to do something very similar with my 17.

[@csofo11]

What size spacer for the rear? .25?

[@dgoyena216]

@@csofo11 1.5". BDS lifts push out the front track width by 1.5" on both sides.

[@jasonroth3318]

I took my lower valance off. the black plastic is a 2 piece deal...left upper one on...looks taller

[@KgTV33]

Do the front wheels stick out more than the back always? So you would have to do spacers on back no matter what to make them even? Or is there a different option? Thanks

[@Beeskness]

You can get rims in -offset

[@danklovell8104]

how would 35s on 20x12s -52 offset fit with a 4 inch front and 2 inch rear bds lift? and also would the 4x2 lift completely level the truck?

[@CustomOffsetsTV]

If its on the exact same truck in the video, give or take a few years, your definitely going to be looking at doing some trimming. And that kit you mentioned should in theory level the truck out perfectly. Check out our gallery and see what others have made fit: customoffsets.com/gallery

[@pat14lang]

instead of wasting the first 1/4 of the video of the truck with music, go over the truck....details with music in the background...

[@j.ebowden6246]

Would this work with factory ltz 20 inch wheels, without trimming?

[@CustomOffsetsTV]

Type in the specs you are trying to run in the gallery to see what fits fam! customoffsets.com/gallery

[@edwardandrew24]

How much are those rims and tires ? What are they called ?

[@CustomOffsetsTV]

Check out the links in description Edward!

[@alexanderpabrezis9262]

If you can help me I'm new to the truck game I have a 2020 Chevrolet 1500 4×4 custom if I add a 2in lift in the front to level it how big an wide can I go with a negative offset on the rims with an tires tires being similar

[@Nightowl82]

How does this compare to the fabtech 4” with replacement cross members in terms of height? Iv herd the fabtech is closer to 4.5” ?

[@CustomOffsetsTV]

They both sit at 4 inches, the Fabtech lift wouldnt sit higher.

[@Nightowl82]

Custom Offsets, good deal. Just checking around because I had spoken to fabtech and a rep told me the basic kit was closer to 4.5 and the budget was at 4

[@humblesquirel21]

I feel like you guys might have some helpful comments for me. where do 35's rub first on the Silverado 1500's 2014+? I'd like to stick to a 4in lift but would like to run 35's on 17in tall 9in wide wheel 4.75 backspacing. If its front bumper i have already installed a high clearance bumper. If its just the sway bar I don't really mind the 33's i have now rub there. If they chew on the cab, that's where I have a problem.

[@CustomOffsetsTV]

Cab, sway bar. Usually hits alot of things on a smaller lift

[@humblesquirel21]

thanks for the reply, I checked out your trucks and setup gallery. very cool and helpful. Thank you!

[@rundeesaputra4138]

Is that lift kit coming with the knuckles? I've seen cv joint n UCA angle was perfectly in position

[@CustomOffsetsTV]

yeds it does, click the link in description for information and pictures on the lift!

[@reaper8847]

more 3/4 ton trucks please

[@andrewgarcia907]

Really want to to the bds 4” strut replacement w Fox coil overs but have no idea if cutting is a must I’d really don’t wanna start chopping a brand new pickup .

[@MrChaparrogli]

Do you have to replace the rear block with a 4 inch lift?

[@CustomOffsetsTV]

yes you do Mr. Chap

[@deadmansbullion9927]

You said 4" lift, but the subtitles said 2.5" which one is it? Id like to get this exact set-up, who can I contact, please let me know

[@CustomOffsetsTV]

This is a 4 inch BDS lift kit 🤘🏼

[@CustomOffsetsTV]

Also all the links to this setup are in the description 🤘🏼

[@JFiel93]

How tall is this guy?

[@CustomOffsetsTV]

5'6"

[@kevinmcbride9036]

What does the load rating on a tire mean..?? I have an E class tire on a Jeep Jk and was told I should use a D...

[@CustomOffsetsTV]

Load rating E/F are heavier duty hauling tires for light trucks, D is a bit more appropriate for a Jeep Kevin! But nothing wrong with running an E rated Tire!

[@franciscorodriguez6511]

E anf F are heavier

[@MrChaparrogli]

How big is the rear block

[@CustomOffsetsTV]

the rear block gets added to the factory block chap, its about an inch in this one iirc!

[@eastonruiz1225]

what do i hafe to do to fit 20x12 -44 35s on my 1995 dodge cummins

[@CustomOffsetsTV]

Easton, check our gallery out for fitment help! bit.ly/2DWyoVo

[@eastonruiz1225]

Thanks that worked perfectly.

[@aarontsosie9807]

How long dose it take to install a bbds lift kit?

[@CustomOffsetsTV]

differs person to person Aaron, we can hammer them out quicker then most people as we do alot of their lift kits!

[@aarontsosie9807]

Custom Offsets How are the stealth shock from fabtech compared to fox 2.0 shocks. I'm not building a mall crawler, I will be using my truck for off roading and a hunting rigg.

[@Nightowl82]

do you know why bds uses a 4 inch rear block while fabtech uses a 3 inch rear block?

[@CustomOffsetsTV]

The BDS one is a true 4" kit, while the Fabtech kit is more like a 3.5" lift. You can check out the 4" lift kits here: www.customwheeloffset.com/store/suspension?sort=popular&year=2014&make=GMC&model=1500&drive=4WD&lift=4q

[@jakeruchti1]

Can i get a link to there website? Interested

[@CustomOffsetsTV]

Check the links out in description

[@joeyjustice9698]

What is the price on this exact setup?

[@CustomOffsetsTV]

The setup is linked below!

[@ellisonsanic1352]

Are y'all till doin the give away!!!

[@CustomOffsetsTV]

Yes we did ellison

[@AznBassAngler]

I love the beats y'all always put in your vids.. could you guys start naming the sounds int he description?

[@CustomOffsetsTV]

Made in house Justin

[@josecantu507]

Hey howdy, I just picked up a ‘18 z71 and have been wondering what procedures y’all have for adjusting the speedometer. Going from stock 18s 265/55/r18 to those 33/20s has to throw the speedo off. What do y’all recommend?

[@RedBrow-96]

paying the dealer to set it correctly

[@Gonzo1968]

How much is this lift kit as is?

[@CustomOffsetsTV]

Look here! bit.ly/370q8Bj

[@solidoustopher]

Not a big fan of square wheel wells, but the setup is clean. Gj.

[@justinwallace38]

I need a job with you guys ima welder/fabricator

[@calevinson4108]

Can you send me a link to exactly what the tires and rims cost with the rough country 4 inch lift on a 2019 Chevy trail boss

[@calevinson4108]

Nvm. I got it.

[@kyleelyk2650]

Perfect

[@cardenas86pcec]

that intro song is the reason i dont watch more videos.

[@rozay817]

turtle ninjas it’s not that serious

[@I5ZQ8]

God it looks like trash on 33s.....im running the same lift and run 35s with very veryyyy minimal rub at full lock and the 35s fill it out very nice. 33s does not do it for me.

[@SelfMadeGrnd]

I want to do 35”. I have the same truck same lift it’s just 2016. I have 20” on 0 offset. You think I can pull 35”?

[@Nightowl82]

I believe 30s would look better!

[@grimreapercmn4u]

At least actually wash it if you're going to get it wet. Looks dirty

[@bo4130]

First !!!