Spray FOAMER battle-which one is best???

Today I bring to you the BATTLE of the FOAMERS. Which spray foamer aces all the tests and prices to be better than the rest!?!? Does the cost matter? Does the build quality make a difference? What kind of foam suits you best? All of these questions and more answered in this head to head test!!
‪@IKSprayers‬
‪@Carsupplieswarehouse‬
‪@Koch-Chemie‬ (Kwazar)
‪@ObsessedGarage‬ (Marolex)
#protection #detailsmatter #clean #detailers #detailingworld #detailersoffacebook #automobile #soap #carcleaning #tires #sprayers #foam #diy #wheelcleaner #wheels #carmaintenance #carcleaningproducts

[@ExodusFX]

Second time's the charm. 😉 Team Marolex all day. Better ergonomics, better pressure relief valve, better trigger lock, and two fan patterns. Personally, I like the white foam insert with tire/wheel cleaners. I don't run those chemicals straight though. Always dilute. If straight, I'd use a sprayer instead.

[@DetailsNMe]

Yes! Dilution I knew was the issue!!! I’ll definitely try the white foam insert!! It’s too expensive not to use!! And you’re right! The ergonomics of the Marolex sprayer are top notch!!

[@Zoranurai13]

I’ve had two ik pump sprayers explode at the top seal… maybe trying the marolex next

[@Bruces-Garage]

Great comparison. I’ve only used the iK foamer so I appreciate learning more about options. 👍🏻

[@joelxala6620]

I've used the marolex, iK, and Mr. Foamer. The marolex was my favorite but it would easily get clogged up. I use the griots garage foam cannon now for just foaming the wheels. Much faster and richer foam

[@WesleySutton]

You gotta change the tip you’re using with the marolex…I have it and it foams like crazy

[@DetailsNMe]

I figured it was totally user error!!! Thanks!!

[@marklevien9591]

Marolex tip needs to be swapped, then will produce much better foam than all the rest. Would also recommend diluting to 5:1 or 3:1, I always use 5:1 to save product and still great results

[@DetailsNMe]

Yes!! I made another video going back and fixing all my mishaps!!!! Thank you!!! Diluting and swapping out the tip was my answer!!!

[@ethanblan435]

Looks like the product might be a bit too thick to flow through as well as it could. I think if you were to do like a 5:1 dilution, the foam would be a bit better. Great test though

[@stevel3881]

I use the same Marolex sprayer and have used brake buster straight up. it appears my tip is the same as what you were using. I added a Schrader valve so I can use my air compressor to air it up. I also pump it up till the air release valve pops up. I get a thick consistent blanket of foam.

[@DetailsNMe]

I keep having issues with mine…I pump until it literally won’t allow me to pump anymore?? Hmmmm

[@stevel3881]

@@DetailsNMe does the pressure release valve pops open? It's the valve you kept calling the aerator.

[@DetailsNMe]

@@stevel3881thank you for correcting me!!! I actually figured out my issue and released another video today addressing it!!! Total user error!!

[@stevel3881]

@@DetailsNMe oh nice. I saved it, but haven't watched it yet.

[@debtennis1301]

Looks great! And congrats on DIYTuber! So well deserved!

[@DetailsNMe]

Thank you!!!! 🙏

[@Turbo6Detail]

I think you made a great point on how often these need to be pumped up. I'm not a huge user of handheld foamers, but my choice out of these is the iK. I have the iK Foam Pro 2 and use the schrader valve instead of pumping. Great comparison video! That Marolex looks like it took some Miralax before this review 💩

[@DetailsNMe]

lol 😆 it actually works better …watch my recent video…it was totally user error!!!

[@elliotsimpson3591]

The Temu is the least expensive and the cheapest because Temu literally ships factory direct from manufacturers in China. When people say "cheap made in China junk," Temu is the epitome of it!

[@DetailsNMe]

After this test I completely agree!!!!

[@elliotsimpson3591]

@@DetailsNMe PS I also recommend putting your comparisons in text on screen (EG prices) in post. Helps for visual folks like me lol

[@DetailsNMe]

@@elliotsimpson3591will do!! Thank you for the suggestion!!! 😊

[@BXGreen]

Great review discussion and demo. Kristi for the people!

[@DetailsNMe]

Thank you!!!🙏

[@BXGreen]

@@DetailsNMemy fav part iK all day! I’m with u. Pump and pump and it doesn’t seem to spray long enough. I wonder how the Schroeder value iK foamer compares in foam time.

[@BXGreen]

@@DetailsNMeu made me want to test the ones I have now! And yes @TIMMclaughlin great idea of the garage door… might use mine too 🤔 😆

[@DetailsNMe]

@@BXGreennot sure would be interesting to see!!!

[@BXGreen]

@@DetailsNMe we re gonna find out … I gotta know lol.

[@1stfrompuertorico568]

Now the video is fine! Thanks Kristi Torres

[@DetailsNMe]

Thank you for being patient with me!!!! lol

[@1stfrompuertorico568]

​@@DetailsNMealways! You don't have to worry, we will give you the proper feedback so it is always good

[@SoCleenDetailing]

Great video! 🔥

[@DetailsNMe]

Thank you 🙏

[@diydetailofficial]

Good job

[@DetailsNMe]

Thanks!!!! 🙏

[@edornelas7248]

I think it cause your using the product straight cause I see a lot of people dilute .

[@DetailsNMe]

I agree!!!

[@DiamondShineDetail]

I bought a YDFL Electric foam sprayer on Amazon Business Prime for like 30 bucks. USB rechargeable, and has built in measuring cup in the cap of the chemical adding port on the side, and extra foam filters for replacement if necessary down the road. I'm more than impressed with how well it foams, and no more pumping!

[@DetailsNMe]

Oh wow!!! I will definitely look into that!!! Thank you!!!

[@amberatkinson4230]

I haven't finished watching yet, but I wonder what your experience is pumping the ik versus the Marolex. I agree with you 100% in terms of comfort of the handle. But, I find pumping the ik sprayer more ergonomic than the Marolex. The flat circular knob on the top of the Marolex fits in your palm nicely but I found the lid started coming off in my hand which I did not like.

[@DetailsNMe]

Yes!!! The lid comes off very easily while pumping…. I’m not a fan of that either!! There are definite pros and cons to both…I think I still favor the ik just because of the price point alone ..but both are very good units!!

[@TheGuitarJones]

The format looks better. Great video

[@DetailsNMe]

I appreciate you watching!!! Thank you!

[@thesamsquatch5224]

The test to see who is the best 💪💪 An excellent video! Stay cool and hydrated. Congratulations on DIYtuber! I’m sure you’ll be getting an email or two from me 😂

[@DetailsNMe]

lol I appreciate your support!!!!

[@Pandaroo883]

Great comparison. I have a marolex with a schrsder valve mod, best thing I could have done to it. I saw your video fixing the marolex tip and dilution 👍. In Australia, the marolex is about the same price as the IK. Cant go wrong with either, however, I do feel the marolex is slightly better built

[@DetailsNMe]

I might need to try the schrader valve!!!

[@theBtotheJ23]

I bought one off Temu for $10 that works pretty well.

[@DetailsNMe]

They definitely get the job done!

[@ethanblan435]

Video format looks better!

[@DetailsNMe]

Whew…yes!!!!!!! lol

[@derrickabare9986]

Some need different tips . Some work better more diluted. At the end of the day its about getting the product on to the surface. I perfer a runny foam . I dont put much stock in thickness , expeacialy on tires/wheels as 90% of the time its getting a brush anyway . P.s. ... are you going to or did you clean your whole door ?

[@DetailsNMe]

I agree with the getting the product on the surface…I just prefer a thicker foam when I have no choice but to work in the sun -for longer dwell time!! I did clean the whole door…but I often use it to test products lol

[@myriadcorp]

I have the Marolex and it's trash. If you swap out the nozzle you can make it much better. I had to mess with it a ton with P&S Brake Buster diluted 3 to 1.

[@DetailsNMe]

I definitely haven’t enjoyed it as much as I thought I would

[@918sonicsupra]

excellent vid! Have you tried any of the electric foamers?

[@DetailsNMe]

Yes!! I have a few and they work great as well!!!

[@918sonicsupra]

@@DetailsNMe do you have a vid going over them like this one? I’m looking to get one and wanted to see which one I could possibly get.

[@edornelas7248]

You gotta try Solo 303FB..

[@davidboyce6427]

Agreed Solo303FB is my favorite it’s easy to use , it has the patented dial on top to adjust the foam thickness to thin foam👀👌. I have the Marolex 3000, not impressed with sporadic foam regardless of my dilutions used , My Kwazar is good just difficult to remove the lid like Kim mentioned. The ikPro 12 e foamer is excellent too. I love my DetailKegs air pressurized which foams ass kickings too.

[@DetailsNMe]

I will definitely look into it?? Amazon?

[@davidboyce6427]

@@DetailsNMe I forgot to congratulate you also. I’m a fan of your channel Kim👀🤜🏾👌

[@edornelas7248]

@@DetailsNMe look at Home Depot or Granger, cheaper thru them or Autofanatic sells them and if u order thru Autofanatic try his wheel cleaner or car shampoo cause I believe he has a 30% off coupon if u order the combo.

[@DetailsNMe]

@@davidboyce6427it’s Kristi actually!!! lol but thank you!!! It’s so exciting!!! I appreciate your support of my channel!!! My competitors are amazing-definitely have my work cut out for me!!! But I’m just having fun!!

[@FrankoDetails]

yoooo, congrats on the diytuber pick, that’s what’s up ✌🏽🐿️💨

[@DetailsNMe]

Thank you soooooo much !!!!!

[@gonin60detailing82]

Good vid!

[@DetailsNMe]

Thank you for watching!!! I love your channel!!

[@gonin60detailing82]

@@DetailsNMe you are way too kind!

[@Dias-v]

Yeeeas 👍

[@1stfrompuertorico568]

First!!!!

[@serranosmobile]

oh yeah

[@edornelas7248]

I think it cause your using the product straight cause I see a lot of people dilute .

[@DetailsNMe]

I think you’re right!