THE BEST PUMP SPRAYERS & FOAMERS FOR CAR DETAILING! MAROLEX

[@PanTheOrganizer]

⬇️🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇️⬇️ Marolex pump sprayers: 🇺🇸 For people in USA: bit.ly/3XyvHVy Obsessed Garage: bit.ly/3XyvHVy Park's Car Care: tinyurl.com/f6u29zp7 🇨🇦 For people in Canada: bit.ly/3VhGOPw Luxury Microfiber Revive rinseless wash: luxurymicrofiberstore.com/products/revive Luxury Microfiber Big Daddy towels: luxurymicrofiberstore.com/products/big-daddy-3-pack 🌎 Worldwide shipping! Watch more videos about Luxury Microfiber products: ✅ The best microfiber drying towel: kzbin.info/www/bejne/ppnXppmuncplb6c ✅ The story of Luxury Microfiber: kzbin.info/www/bejne/eWStmaJ6q9afmNk ✅ Luxury Microfiber Armor SiO2 spray sealant review: kzbin.info/www/bejne/hInLl3dsZt2UpKs 🎶 MUSIC I USE IN MY VIDEOS - Referral link, get a free trial by clicking below! www.epidemicsound.com/referral/pjuxkd

[@adisurd]

@Pa I am thinking of buying the Axel 2000 or 3000 for the foaming part. I would like to use it to foam my car when getting to wash it. I own a Tesla model Y Would the axel 2000 be sufficient for one wash or do I need to buy the 3000? The price difference in The Netherlands (where I live) is not much, but I also want to save space. Hence, I would like to know if 2 litres of solution is sufficient to foam a Model Y or do I need to go for the 3-litre option.

[@waynefromnewfoundland8740]

Oh my Pan! I’m gonna to be divorced. My wife heard “Paaann the . . “ and she called out “you better not be ordering any new stuff”! 😂😂😂

[@luxurymicrofiber419]

The pump sprayer is good for home cleaning too, kitchen, bathroom, floors. Get one for the wife, she will thank you and tell her friends :)

[@waynefromnewfoundland8740]

@@luxurymicrofiber419 Thanks for the tip. But I gotta plan this just right. 😂😂😂

[@PanTheOrganizer]

Hahahah good one Wayne! But tell your wife that all your purchases are "Pan Approved!" and let me know how that works out for you. ;)

[@waynefromnewfoundland8740]

@@PanTheOrganizer 😂😂

[@bartsalien8363]

Hahhahaha, when I showed my wife my initial list of pan items I want to order after watching all the videos, she fell off her chair 🤣

[@dillanmistry]

This fills the void in my knowledge as pump sprayers are very underrated and not talked much about. Thanks

[@PanTheOrganizer]

There you go! ;). You never know what's you'll see next on the Pan The Organizer channel.

[@minaviladas2855]

Marolex sprayers and foamers are the best I’ve used, they spray for a long time. Must have for rinseless washing. Top quality product and Luxury Microfiber is an excellent company.

[@luxurymicrofiber419]

Thank you. Means a lot to me

[@PanTheOrganizer]

Yes they do spray for a long time, it's actually crazy how much longer compared to my other pump sprayers. And Sumeet is super professional and runs his business so well. Great guy!

[@CharlesInCharge808]

Hey Pan, I just want to say thank you for making such practical and professional videos. I have been detailing for a while, but I recently started my own detailing business and you were a huge part in my journey. From best practices and products to professional impressions, you are the best. Mahalo 🤙🏾

[@PanTheOrganizer]

Thanks Charles, I really appreciate the positive feedback! What’s your favourite video on my channel so far?

[@dave2166]

the bit I like most. the four indentations at the top so even with cold slippery hands you can still grip it well to open and close it

[@PanTheOrganizer]

There are so many cool features bout the Marolex sprayers.

[@OCDaddyZsolt]

So far the best pump sprayers and foamers that I've tried. I got my Marolex sprayers/foamers from Poland, during the summer holiday last year :)

[@PanTheOrganizer]

Thanks for sharing

[@brianhickey5949]

LOL! My one aggravation with my IK 2.0 is that you have to pump it every 15-20 seconds. Here is the answer to that. Now I have to justify the expenditure :) Thank you for finding the best tools!

[@PanTheOrganizer]

The IK are still a very good choice. I have owned them for years and they are high quality. But when I tried the Marolex, it was a completely different level. The Marolex spray for much longer without needing to be pumped and the spray is higher pressure. Among other things.

[@brianhickey5949]

@@PanTheOrganizer It sounds like I "need" the Marolex :)

[@Jimbo5063]

Pan - Based on your review, I bought one of the Marolex Sprayers. Oh my gosh this is the BEST sprayer I have ever used. I also picked up a couple of The Luxury Microfiber drying towels, once again based on your recommendation, These towels are unbelievable. I know you said you could dry an entire car with one towel, I was a little skeptical until I tried it this morning on my daughters Tesla. One towel did the entire car. Thank you for the excellent recommendations!

[@PanTheOrganizer]

Thanks for the feedback and for your trust in my opinion! :)

[@dsvillalva]

Thank you for such a comprehensive review Pan. This goes to show how much you listen to your audience - we asked for a Marolex review and you delivered. Thanks for spreading the word about Marolex - they are at the pinnacle of what they do.

[@PanTheOrganizer]

Thanks for the positive feedback! And yes my viewers are very important to me. So when I see the same topic is requiested by many viewers, I will try to do a video about it.

[@shawdewson]

Damn. I need to buy one now! Wife won't be happy😂

[@aldaley3537]

They are awesome. Cringed the first time I dropped one of them. No damage whatsoever. Got the Marolex Axel 2000 Foamer and (2) 1500 Industry Ergo pump sprayers from Luxury Microfiber.

[@PanTheOrganizer]

Yeah these are heavy duty! So awesome.

[@piotrkrzemien114]

Polish Marolex. Regards from Poland.

[@PanTheOrganizer]

Cheers from Canada Piotr!

[@ROBERT-eg4ys]

The sucker Jr drying microfiber towel works great I found out about luxury microfiber from Bryan over at Apex . Great video Pan hope I didn’t confuse you on my question. I also use the 1000 for my APC pre rinse with extra tough or P&S APC .

[@ahmedalabsi133]

Hi Pan, Two questions: 1- I live in an apartment with no access to a water supply. Can I use pump sprayer for my weekly wash and do once a month at a car wash? 2- Do you have a video for what to own from scratch to maintain and detail a brand new car ?

[@nomad509]

Marolex sprayers are freaking amazing Pan, thanks for highlighting these tools in your video. I made the switch several months ago because I realized I never had enough ONR for a presoak on the car with my Multi Pro 2 so I upgraded to the Industry Ergo 3000 and absolutely love the spray pattern much much more and the nozzle lock is quite helpful for hand fatigue. For foaming Brake Buster, I am still using a Foam Pro 2 that is still performing well and I'd say it is the better of the two sprayers in their lineup.

[@PanTheOrganizer]

Thanks for sharing!

[@Jeff1960G]

Hello, not sure if you will respond Pan, but I just received my foam sprayer and tried using Adam's Car Shampoo (using the correct formula) and I got nothing but little spurts coming out. I tried the various tips that came with it, and still nothing. What am I doing wrong? Thank you.

[@PanTheOrganizer]

Hard to say, as I don't know what sprayer you got (only the Axel series is meant for foaming, the one with the blue top) and don't know what dilution you used. You have to play with dilutions until you get something decent, and also hopefully you don't have hard water issues where you live as that greatly impacts the quantity and richness of foam you get. Did you try reaching out to Marolex or the company where you bought the sprayer from?

[@Jeff1960G]

@@PanTheOrganizer Marolex (Marolex Axel 2000) Foam sprayer like the one you demo in this video. The ratio was 2 to 3 oz per canister. I tried both options, 2 and 3 oz, but same results. I did reach out to Marolex but no response. Anyway, thasnk you for your comment.

[@cariocamia]

Thanks for the review. I purchased the industry 1000 from LM a couple of months ago and it's been working great for me. I use it for my pre wash spray before every rinseless wash.

[@PanTheOrganizer]

Thanks for sharing your personal experience.

[@Jander_]

Can I use to clean my carpet too?

[@thepassionofthegoose5472]

Thanks again, Pan. I have a car/fleet wrapping business. As you'd imagine cleaning is an important part of the wrapping process. Given our space needs we use a lot of products from the mobil detailing industry, and a new pump sprayer is literally on my current shopping list. Cheers and hope you're still enjoying your Glashütte Original.

[@PanTheOrganizer]

I sure am! I've added a few more time pieces since that video, but the Glashütte Original is still among my favourites. :)

[@thepassionofthegoose5472]

@@PanTheOrganizer Can't go wrong with a GO. Cheers.

[@mgaretz]

Hey Pan. Just got both the Axel 2000 Foamer and the Ergo Acid 2000 sprayer. I had the IK products and while their sprayer works pretty well, the foamer was anemic and didn't stay "pumped" for very long at all. The Axel 2000 blows it out of the water! Tried the sprayer this morning to apply a quick detailer and the spray lasted for the whole car! And it's mid-sized SUV! Keep up the good work!

[@PanTheOrganizer]

Thanks for your real world use feedback Mark! And thanks for the trust you place in my opinion.

[@christian_urocar]

Wow that’s insane, I’m excited to give one of these a shot

[@Hairfan]

For the sprayer, did you fill it up to 2L? And how much was left after you sprayed your SUV? I'm trying to figure out whether to get the 1L or 2L. Thanks!

[@TheDatpussy]

@@Hairfan definitely the 2L

[@HeliRy]

These look great, just ordered myself one. I’ve got a foam canon for the gas fuelled power washer, but it’ll be nice to have a foam sprayer that I don’t need to drag out the beast for and pull-start lol.

[@PanTheOrganizer]

Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 1 million subscribers and we have over 135 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@chrisbigknowledgegarland6366]

I was looking at some other pump sprayers to purchase. I'm glad I watched this video first before I decided to buy the other brand sprayer. Thanks Pan! Great review!

[@PanTheOrganizer]

Thanks Chris!

[@aleksandersiuda4575]

Nice to see our Polish products in your video! As always great job Pan 💪🏻.

[@PanTheOrganizer]

Thanks Aleksander!

[@no_lft_shft]

I love waking up to new videos from Pan

[@PanTheOrganizer]

Let's go!

[@no_lft_shft]

@@PanTheOrganizer Pan I'm doing my first top to bottom, inside out, full detail and paint correction and the. topping it off with Gyeon can coat. Keeping it safe for my first ever ceramic coating lol. I've learned so much from your channel among others and I feel I have the knowledge to do this. Plus I have the perfect car that's been neglected for years. I'll share pics on Instagram when I'm done. Thanks for everything!

[@marshprofessionaldetailing9794]

Thanks for the review Pan. These look like they are fantastic and the design is genius.

[@PanTheOrganizer]

Thanks for watching!

[@jeffreyrobert9460]

I can definitely get onboard with a pump sprayer for prewashing the paint with a 10% Green Star solution. For wheels, I prefer Brake Buster in a cheap foam cannon.

[@thefosterfam]

definitely going to pick one of these awesome pump sprayers up, great video as always

[@PanTheOrganizer]

Thanks 👍

[@sabotage3d]

Thank you for recommending these. I have used the 2l for about 6 months now and it has been amazing. Here the marolex is cheaper than IK.

[@joegamas1194]

Sold, sold, sold…. lol…I’m definitely getting this one, and my Chemical Guys are gonna be retiring, I’m so glad you made this video for us I’ve never been completely happy with my chemical guys one Thank you Pan

[@PanTheOrganizer]

😁👍🏻

[@paul6749]

Hi Pan, I bought the foamer and a sprayer a while ago, and totally agree on the build quality - bullet proof. I can citrus spray my SUV with one pump session. How did you get Brakebuster to foam so thickly at 10:1? Most reviews quote 4:1. Did you use distilled water? Did you use the light blue insert? Thanks

[@PanTheOrganizer]

I have DI water in my garage. Nothing but the best. ;) In my other foamers, yes I diluted Brake Buster 4:1. But in the Marolex Axel, 10:1 works so well, as recommended by Luxury Microfiber who uses Brake Buster in his Axel foamer all the time.

[@b374mxg]

Pan- just received my Marolex Industry 1500 pump sprayer today. What a GREAT product!! Did a rinseless wash soakdown with it. No problem getting around the complete 4 door car without pumping up again. Thank you for your great review. Now, the only question what do I do with my collection of pump sprayers?

[@PanTheOrganizer]

Awesome! Glad you enjoyed it. You got the good stuff!

[@kevinb7058]

Yep I have the Marolex foamer 2000 and it's great. Very sturdy and foams up well. I use it for wheels 👍

[@PanTheOrganizer]

Thanks for sharing

[@maksimgr1767]

A lifehack to get 2 in 1 system. Buy Foamer to use foam. If you need sprayer you need to take off cap and see the long tube inside. If you look close the long tube consists from 2 parts, long tube and small tube with plastic connection and hole in it. Take out whole tube and separate short tube with plastic connection from long tube then put back only long one and now you have sprayer! Also you can take out a foam tip. But this is not the end. Also you can buy a spray nozzle from sprayer version that perfectly fit with foamer! 😉

[@tsyriac]

@@maksimgr1767 I bought the sprayer, how can I make it a foamer as well ?

[@archwaytotheocean]

I wanted to purchase one of the Marolex pump sprayers, but the shipping to Canada is INSANE! Shipping almost costs the same as the product itself...

[@rick535xi]

Thanks Pan. Ordered the 1500 pump sprayer ,towel and revive kit. I also ordered another set of towels. Let you know how it goes once the products come in. The 3000 foamer is next.

[@PanTheOrganizer]

👍🏻

[@rafadiazsantiago]

Very good informative video. The major disadvantage of those sprayers is the price. They could be an investment for those dedicated to detailing as a way of living but in my humble opinion it is insane to pay around $45+ for a spray bottle to be used at home as a weekend warrior.

[@chrisryan8894]

The high shipping makes it a tuff pill to swallow

[@poultrylord7300]

$65 for a new video game, dinner date with the wife $50 without drinks easily, tank of gas $80 etc. These are a steal for the quality, a buy once, cry once kind of item.

[@EireFirst2024]

Bought the ik for wheels, works great & €30 doesn't sting 2 bad 🙂

[@deanolivas3011]

I have purchased several of these a couple from Matt and several from Luxury Microfiber the one thing I never see mentioned anywhere and it's what I absolutely hate the most about these is the dumb plastic top where you pump it when that thing pops off and you pinch your hand you'll want to throw that sprayer what I have done is sand that little clip off completely so it's nice and round and silicone that top on now I have no more problems but that is the absolute worst design especially when the handle holds the extra tips if needed thanks again for reviewing these much appreciated it should help the community 👍

[@ianapriliatuono]

Just compared the ik sprayer to these night and day difference the ik keeps it’s pressure for about 20 to 30 seconds These ones 2 to 3 mins Really impressed

[@PanTheOrganizer]

Yes the Marolex have a lot more pressure compared to IK and also you don't have to pump the Marolex as often.

[@ianapriliatuono]

@@PanTheOrganizer Absolutely agree they are so much better

[@jazzman9469]

Hello, I received my Foam Sprayer a week ago and I can't get any foam. (using Adam's Car Soap that was recommended in a different video). I followed the instructions perfectly and it just spurts out and nothing like the videos. I have been detailing cars for years and when you recommend a product, I will generally purchase it. This time, not so much. I tried to adjust the formula and the nozzle heads but still nothing. What am I missing?

[@davidortega7496]

Thank you, Pan. I have found your videos so valuable and have learned so much from you. Thank you once again.

[@PanTheOrganizer]

Thanks David! I appreciate the feedback. What’s your favourite video on my channel so far? Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 840,000 subscribers and 105 million views! I have been detailing for 25 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@davidortega7496]

@@PanTheOrganizer I have really enjoyed the way you showcased James from Top Class Detail and your relationships with others in the profession. One of the most valuable components of running a thriving and profitable business is creating relationships built on mutual respect and trust. You have very effectively highlighted this for many budding detailers. Where running a business is concerned; it might be helpful for aspiring detailers to understand how to manage their business’s operations, accountants payable and receivable, cash flow management, billing, sales and marketing, incorporation as an LLC, liability insurance, the proper legal advice to seek out and understand, etc…

[@STREETFIGHTER50]

Thank you for all the informative videos Pan! Few questions for ya. -Can I keep non acidic wheel cleaner stored in one of these Axle foam sprayers? Or is that a bad idea? -Why is Obsessed Garage phasing out the black handle sprayers? Here is a quote from OG’s website: “We are phasing out the black-handled master Series sprayers with the blue-handled ALKA sprayers. We have some black still in stock, so you may receive a black top or a blue top.***”

[@billtaglia2865]

I’ve been wanting to add a foam pump sprayer to my stable and your video was the clearest one to help me make a choice. My question is, for the axel model, can any car wash product be used in it to create a foam?

[@PanTheOrganizer]

Yes but you need to find which shampoos would foam well in a pump sprayer, and which dilution ratio to use. So you need to play around and have fun seeing what works.

[@billtaglia2865]

Thanks for that input. I do have some different shampoos and just might pull the trigger on the Axel model. With nearly 3/4 million subscribers, it’s amazing that you take/have the time to respond.

[@billtaglia2865]

Pan, I just took delivery of the Axel 2000 foamer. Is it me or is it as difficult as the instruction manual makes it sound to do maintenance on it? It’s like the whole thing needs to come apart to lubricate all the elements with silicone grease.

[@dalriada842]

I've been using Hozelock and Gardena sprayers, because they are readily available from DIY stores where I am. They're not ideal for the task. You have to remember to depressurize them as soon as you stop using them, or the chemical leaks past the seals. I'll be looking in to these as replacements.

[@MikesAutoDetailing]

That was a paaaaaaaaaaaantastic review.... I have the Axl3000, but the casket did not last long.... to replace the casket its a little pricey, I do love the sprayer, just need to fix mine... can't wait for the next video

[@luxurymicrofiber419]

We carry replacement parts on my webpage. You can easily fix any issues from use. These sprayers are designed to last many years

[@PanTheOrganizer]

Thanks Mike! And as Sumeet says, replacements aren't costly and you should be able to get it back and running. He has great customer service.

[@MikesAutoDetailing]

@@PanTheOrganizer 8.00 for parts then 8.00 for shipping.... to me thats little pricey

[@vancity2349]

Thanks Pan. Love your passion for the different detailing products available.

[@PanTheOrganizer]

Thanks! 25 years of being passionate. Every time I open a new box with detailing goodies in it, I’m still excited like a child! Kid in a candy store.

[@cynthiaenglish2736]

I’m really looking forward to the Luxury MF video series. I recall seeing an interview w/the founder of Luxury MF; his story & business journey are quite amazing. I was also impressed that he is the real deal and his passion for detailing is equally genuine. At the time, I found myself pulling for him and the success of his company. Glad to see he hooked up w/Marolex (I bought one last year and love it). I recall that creating solid business relationships was the heart of his business model. Looks like he is continuing to curate the very best for detailing. Can’t wait to see what’s up next! Thanks Pan!

[@PanTheOrganizer]

Thanks I appreciate it!

[@ToshYusaf]

We have an additional version in the EU; Marolex Industry Alka: designed with different seals for alkaline chemicals. Our acid sprayer is called Industry Acid.

[@luxurymicrofiber419]

The Ergo Industry line is designed to handle acid based chemicals. We just refer to them as Industry instead of Industry Acid. Hope this helps

[@KiranPatel-fk1pg]

@@luxurymicrofiber419 Considering alakline is more common then acidic chemical in detailing why not also offer the alkaline version?

[@luxurymicrofiber419]

@@KiranPatel-fk1pgDefinitely an option. Thank you

[@vinciesthetiqueauto]

Merci cher Pan pour ce comparatif, utile et complet. Je l'utilise surtout lorsque je ne suis pas dans mon garage 👍👍👍

[@PanTheOrganizer]

Merci!

[@dpj9421]

Hi Pan, upon your review, I have bought the Marolex Foam 3000, however when I filled it to 4.5oz dilution (as I do not need much solution for just 1 car), the foam that came out were not as shown by your demonstration. Its 1) Not fan-wide that covers much area 2) Its pretty much dotted with plenty of spaces in between each 'dot' of foam 3) The Pressure doesn't last as long (only about 2 doors) which seems weird for a 3000 capacity. Could you please advice. Thank you!

[@PanTheOrganizer]

Not all products are made to foam, and you have to get the dilution right. So I have no clue what you were using in it, you didn't mention, also what dilution ratio, what water you have? Don't forget, I used deionized high quality water, so everything foams better with that. Did you try reaching out to Luxury Microfiber to troubleshoot? Or from the place where you purchased it. They are better suited to help people with these questions. You need to consider many variables here. The pump sprayer works great.

[@dpj9421]

@@PanTheOrganizer Hi Pan, thanks for your quick revert. I was using that pump sprayer with CarPro Descale with 1:10 dilution ratio. I use with regular garden hose water (not deionized). However, let alone not foaming well, the spray pump doesn't seem to spray with regular patterns. It sprays out tiny foam splatters as if something was stuck in the nozzles (but it is not, I've checked everything) and the pressure doesn't last long (about 2 doors on regular sized sedan).

[@PanTheOrganizer]

Perhaps try another product that foams to see if it does the same. Descale is acidic and the Axel foamer is mainly used for higher pH products (alkaline) as people usually use foamers for APCs or snow foams or alkaline wheel cleaners. I used Descalenin my foam cannon with my pressure washer and even there it doesn’t foam like crazy. If you try another product and the foamer still does the same, perhaps you just have a defective unit.

[@2klatte]

Pan, can you do a vid on the effectiveness of foam pump sprayer vs. Pressure washer foam cannon of the Bilt Hamber touchless foam? Grateful to have a helpful channel like yours in this space.

[@rafielgarcia426]

I’ve watched your videos on detailing but I have 1 big question, can the same techniques and chemicals be used on vehicles with ppf without harming or damaging it?

[@PanTheOrganizer]

Yes, but just be more careful, and perhaps inform yourself ahead of time with your PPF installer to see if there are any recommendations for your specific PPF as it can vary from one company to another. Rather be safe than sorry.

[@wesleystevens7283]

I have the 1000 series Industry’s,use it for Iron removal and the Foam model for at least 3years now,great products.I believe Scott from Dallas Paint Removal introduced this product back then

[@PanTheOrganizer]

Scott was only there to help with marketing at the time, but it is Sumeet's business since day 1. They have parted ways for a while now, so Luxury Microfiber is the only official importer of Marolex sprayers in USA.

[@iand6453]

What type of car soaps do you think would work well in the pressurized pump? I live in Chicago with no driveway/garage let alone a spot to wash my car. My goal is to take my car to a self service car wash but then apply my own products and just use the pressurized spray at the car wash to hose everything off. This looks like a great option to bring with me.

[@PanTheOrganizer]

amzn.to/3Rra7ge

[@tj1470]

Pan, is the Kobrajet the best pressure washer hose that you can get? If not, would you please advise me accordingly. I want to upgrade the hose on my Kranzle HD 7/122. I've got Matts OG Sprayer Gun & all mosmatics tips and connections. The pressure washer hose and water hose are the only 2 things left to upgrade.

[@dandydonslife9869]

Pan, great tutorial on pump sprayers, enjoyed watching, thanks.

[@PanTheOrganizer]

Thanks! Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 960,000 subscribers and we have over 130 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@dansdinc]

Is there a benefit to using a pump sprayer for a weekend warrior? It seems like you use a lot more product and squeezing a trigger isn't as big a deal when you're not doing it everyday.

[@PanTheOrganizer]

That's up to you to decide, how much you value pumping less, and also the Marolex have more output pressure.

[@kllaskullz]

Definitely going to try these out… also pan if you didnt noticed dont know if you did it ok purpose but you put the rinse less wash link twice and not the towel

[@PanTheOrganizer]

Thank you for that! I updated the links. :)

[@richardseem7948]

Awesome video and product review good friend.

[@PanTheOrganizer]

Thank you! Cheers!

[@donaldthomason4588]

Great review Pan, I love these sprayers!

[@PanTheOrganizer]

Thanks Donald! Which ones do you own?

[@brentransenberg1580]

How does this compare to the IK sprayers. I know you have a ton of those. Are the Marolex really worth the 50% price premium. You can get a good IK for $40 out the door... the Marolex is $60with shipping and tax...

[@PanTheOrganizer]

Yes the Marolex are superior in my opinion. Don't get me wrong, I like the IK's too, they are high quality pieces, but now that I have the Marolex, I pretty much only use the Marolex as you pump them a lot less, and they spray for longer. Also, the max pressure of the Marolex is a lot bigger compared to the IK. For the price, that's up to you to decide though. Money is never an object for me when buying things, but for many it can be a deal breaker and I fully understand that.

[@brentransenberg1580]

Thanks pan! Follow up question. Do you preffer sponge or wash mitt or microfiber towels for rinselss washes? I'm washing my car once per week these days and it's usually pretty clean just tree dust and light sap and salt from the beach.

[@PanTheOrganizer]

I prefer the sponges made for that, like The Rag Company Ultra Black Sponge or the Big Red Sponge from Optimum. But I have used a microfiber wash mitt for that and that woks well too. But it's really a question of personal preference. Some swear by multiple microfiber towels, others with the sponges, etc.

[@brentransenberg1580]

Thank you so much! The black sponge has been sold out for months. BRS is a little pricey have you ever used the SudzBudz spoges they are 2 for $17 on Amazon and have those cuts in them. Just not sure how soft or durable they are. What's your opinion?

[@yo-xzn8600]

Hey Pam quick question how much Carpro reset should I add to the Axel 3000 when it filled to 3000ML?

[@tben9357]

Thanks for the vid pan!! Which one of these would you recommend getting to use for a pre wash for a pickup truck?

[@PanTheOrganizer]

By pre-wash you mean foaming a soap on the vehicle? The only one that foams is the Axel series.

[@tben9357]

@PanTheOrganizer not so much for foaming, mainly just looking to see which size of these would be a good size to get and hold enough chemical to do an entire pickup truck with without having to refill.

[@PanTheOrganizer]

I'd get the 3L one

[@tben9357]

@PanTheOrganizer thank you!

[@tedlym.3390]

Now you tell us. I ordered an IK 2.0. It's scheduled to arrive today. Thank you for the informative presentation.

[@chadamos7297]

Lol, my Ik 2.0 is being delivered in a few hours too! Damn it! Oh well, should work just as well as this one.

[@tedlym.3390]

@@chadamos7297 I received mine but it's too cold and rainy to use it here in Warren, Michigan, USA. I hope you get to try your's soon. Thank you,

[@PanTheOrganizer]

The IK are still a very good choice. I have owned them for years and they are high quality. But when I tried the Marolex, it was a completely different level. The Marolex spray for much longer without needing to be pumped and the spray is higher pressure. Among other things.

[@chadamos7297]

@@PanTheOrganizer it does look a little more user friendly with some added features. Appreciate the videos and the reply!

[@danny091283]

I life in an apartment, but i am washing my car in a coin wash. I take my own waterbuckets with me. I only use the coinwash for rinsing

[@jessemartinez555]

would it be recommended to dedicate a sprayer for certain products? or can one be used for a variety?

[@PanTheOrganizer]

It depends on your budget and your needs. Some like to have multiple dedicated sprayers for different chemicals. Others like to have one, rinse it after use, and reuse it the next time with a different chemical.

[@neimanfarkus9708]

Since I am a small female, I always try to use the smallest devices I can. If I get the Marolex Foamer 1 Liter, do you think I can foam a whole medium-sized SUV without refilling the bottle? Or do you think the 1.5 liter size would be better? Since I’ve never done this before, I’m sort of clueless as to how much liquid I will be using. Thanks Pan.

[@PanTheOrganizer]

The 1.5L will be the one you'll need.

[@JSRSChannel]

Thanks for the thorough review, Pan! Greetings from Poland :)

[@PanTheOrganizer]

Cheers from Montreal Michal!

[@joelmarris]

I’m torn between this and the IK Foam Pro 2+ both look like great products! 👌

[@gary9879]

I’m thinking the Pro2+ so you don’t have to pump

[@cynthiaenglish2736]

Marolex makes a 7000 unit that you can pressurize - you can get it at OG.

[@joelmarris]

@@cynthiaenglish2736 Thanks! I’ll look into that, looks at bit pricier and bulky than the Pro 2+ though!

[@cynthiaenglish2736]

@@joelmarris Agreed. I have an IK & Marolex (smaller versions) but my Marolex is just built so much better. Good luck on your purchase.

[@joelmarris]

@@cynthiaenglish2736 Thank you 👍

[@davestewart9146]

I have the marolex 3000 foamer and have never been disappointed, great video Pan 👍😁

[@PanTheOrganizer]

Great to hear!

[@solomonmansiya2260]

Nice video I recently bought a pressure washer and a foam cannon thought the pressure washer was fully quick connect, it wasn’t this is the perfect item I’m looking for

[@PanTheOrganizer]

Thanks for watching. A pressure washer and foam cannon setup will always generate more foam compared to a foaming pump sprayer. Keep that in mind. As long as you have a decent pressure washer capable of more than 1.2 GPM of water output.

[@nordicgloss]

Have been waiting for this review! Im about to change my Kwazar sprayers for Marolex! Looks like they are more durable.

[@PanTheOrganizer]

These are insane! :)

[@yehudamiller3943]

@@PanTheOrganizer I am insane mates, ta for the Marolex advice. My use is sray on wax & protectant products. Do they ship overseas?

[@devinbourgeois6560]

Great video, i just ordered the foam & industrial spray. Cannot wait to use these instead of pulling out the pressure washer!

[@PanTheOrganizer]

Enjoy!

[@KonstaNykanen]

Those Marolex pump sparyers look truly powerful💪🏻. Stellar work Pan👍🏻

[@PanTheOrganizer]

Yeah they are my go-to pump sprayers now.

[@TheBillclark2]

@@PanTheOrganizer How are they better than the IK products?

[@jhiggi7282]

Pan. I didn’t understand the Master series. Why buy one. Is it just for toppers, glass cleaning. What can you use this one for?

[@PanTheOrganizer]

The green bottles are for gardening and home use normally. It just so happens that you can use them for detailing. I use green bottles for things like rinseless washes and drying aids. Glass cleaners would be great too. But if you get the white bottles you can put what ever chemicals you want in them.

[@jdgarage85]

Hey Pan, can you please explain why the Marolex are superior to the IK pump sprayers? Thanks

[@PanTheOrganizer]

I pretty much explained all the reasons why in the video. Did you watch my video? I gave all the technical specs. But in short, for sure, the Marolex are the best pump sprayers I have tested to this day. I have pretty much the entire range of IK sprayers (from the original Foam, Multi 1.5, to the new Foam Pro 2, Multi Pro 2, and Foam Pro 12), and these Marolex allow me to spray for longer without pumping as much, and have a higher output pressure, among other qualities. So nothing wrong with IK. They are top tier. But Marolex is superior in my opinion. Check out other videos on the topic on KZbin, you'll see the same conclusion. Including this one from my friend Matt Moreman: kzbin.info/www/bejne/g3O0kpt5d7-BY9E

[@jdgarage85]

@@PanTheOrganizer Thanks Pan, I will definitely watch the entire video when I get off of work. As always keep up the good work my friend 👍🏼

[@DJJumpdancer]

i was looking for a new sprayer for wheel cleaners where the cleaner wouldnt run over my hand ^^ this looks great

[@PanTheOrganizer]

It's so good!

[@DJJumpdancer]

@@PanTheOrganizer I might modify it and install a compressor port so I can use the mobile compressor I use with my gloria fm30 foam sprayer on it :D

[@neilwalker5041]

Nice video Pan and those sprayers look impressive in terms of build quality and design. As soon as they put an adaptor for filling up using the air compressor I am sold. I did like the rinseless wash as it looks to clean very quickly. Thank you for the video.

[@PanTheOrganizer]

Thanks Neil.

[@PeteGrk-eb5ck]

Great video Pan, I’m definitely getting the foam pump sprayer. Thank you

[@PanTheOrganizer]

Thanks Pete!

[@jacoblynch2634]

Hey Pan, I am currently in the market for a good pump sprayer and these all seem to fit the bill. I would really like something that foams so I can efficiently use it for something such as Brakebuster, however I would also like it to not foam things up such as APCs or Rinseless wash solutions such as ONR or McKee's N-914. After watching your video the axel series seems very appealing, but my question for you is if you were to put something in your axel foam pump sprayer that does not have any foaming properties such as an APC or a Rinseless wash, how would those chemicals react, would they foam up as well or would it just act as a normal pump sprayer in this scenario? I would really like to only have to buy one pump sprayer at this point so if the axel series could do both, that would be perfect! If not, can you only recommend that I purchase two separate pump sprayers for the two separate types of chemicals? Thank You!

[@PanTheOrganizer]

Axel is only for foaming products. Not for liquids that won’t foam. So you’d need an Axel for foaming and another of their sprayers for rinseless washes or products you don’t want to foam. There’s no way around that unfortunately. And same applies to all sprayer brands. An IK Foam Pro 2 is made for foaming while the IK Multi Pro 2 is for non-foaming products.

[@jacoblynch2634]

@@PanTheOrganizer Thank you again for the quick response! This really helps.

[@PanTheOrganizer]

😁👍🏻

[@czitowyludek]

BTW it is quite easy to dyi convert sprayer into foamer and then revert if you are using marolex. greetings from Poland ✌

[@robertquiles8436]

This guy right here has the best explanations of detailing products great video. I wish you was in New York so that you can detail my 2022 Acura TLX

[@PanTheOrganizer]

Thanks for the kind words Robert! Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 835,000 subscribers and 105 million views! I have been detailing for 25 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@mrvang8077]

Been wanting to get a foam Canon for a while that is easy to use use, portable and perform above all expectation, but was hesitant due to worry that it might not live up to its performance and would just be more of a waste of money buying one crappy product after another. Until, I saw you just started spraying the engine bay with that hand pump, Cannon. I was blown by how much foam it just cover that engine bay. I have decided to give the go-ahead and purchase that specific one that you have. I follow the link in your other video to the website, but was too pricey with the shipping cost and they were out of stock and I just wasn't gonna wait for it to be available to get mine on reserved considering that i have to pay for the shipping cost and then wait another 2 more weeks to get it delivered so I bought it on Amazon for a much better deal no shipping cost and as a prime member I can get it the next day. 33:35

[@darkktint5974]

Keep them coming great content I will try one of them myself.

[@PanTheOrganizer]

Thanks, will do!

[@todtalk3912]

I thought you were actually going to test different brands? This isnt bias lol. I have a kwazar foaming sprayer, n i like it because its decently bog, it looks amazing, it'll hold air for weeks, the seals are replaceable, there is diff tips that come with it and its built like a tank. The ones ur using i have and like as well, however the kwazar foamer 2 liter is it for me. Love it. For a spray bottle, it has shelf appeal loke no other.

[@stephenmiller5572]

Hello Pan, do you have any videos on fireman spray nozzles. I wanted to know which ones are good and can they be hooked to pressure washers.

[@PanTheOrganizer]

I don't have a video on that topic, but these would be the best fire hose nozzles: bit.ly/42AO9g1

[@stephenmiller5572]

@@PanTheOrganizer thank you, you never disappoint. I will make sure to share your channel with my friends

[@victortobar-herrera7421]

which one should i use for p&s products like xpress interior cleaner or carpet bomber?

[@PanTheOrganizer]

It depends on your needs. For foaming results, get the Axel series. For everything else the Industry Ergo is the normal spray with chemical resistance.

[@jeffrotenheber2681]

Hi Pan .. do you think a rinseless wash or a foam is a more effective pre soak before the wash? Thanks for sharing all of your knowledge

[@PanTheOrganizer]

I use a rinseless wash as a pre-treat, then rinse, then foam, rinse, wash. Sometimes, I'll just foam on a dry surface if the vehicle isn't as dirty, rinse, then wash. Sometimes foam, rinse, foam, wash. There are many ways to wash a car. Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 965,000 subscribers and we have over 130 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@jlb3675]

Thanks Pan, I was thinking of getting a few new sprayers these look so much better than what I have now.

[@PanTheOrganizer]

Glad I could help! These are really eng game pump sprayers. So good! What are you currently using?

[@jlb3675]

@@PanTheOrganizer I have a couple IK products, and they work well but I really liked the look and how long the pressure lasted on these.

[@wildpony1957]

I have the axel foamer and it works well. My biggest complaint is when pumping, the cap pops off a tad and ends up pinching my hand. It happened all the time. Very annoying. But it works fairly well.

[@luxurymicrofiber419]

Make sure the cap is tightly snapped in place, a little force may be needed. Once its secured firmly, it will not come loose or pinch

[@jasonau6713]

Hi Pan, I just bought a axel 2000. Do I need to take the little sponges in the foaming inserts out, whether they are necessary to generate foam?

[@PanTheOrganizer]

Don’t remove anything. It comes ready to use.

[@jasonau6713]

Oh, Thanks. I thought the sponges would block the water flow so I took them all out and they got mixed up, now I don't know which sponge should put back to which insert.😅

[@Sunny-3]

Hi Pan, I was going to go for the Kwazar range, would you say these are still the Marolex is the best? Also are the Axel version not recommended for Acid type wheel cleaner?

[@santiagorojas9128]

Great review Pan as always, which one would you recommend me if I can only buy one right now that can do pretty much both thank you

[@PanTheOrganizer]

One type sprays normal liquid, while the Axel is for foaming type products. Two different uses. So I can’t just recommend one.

[@Mari0o0o]

Been using them for a while. Love them.

[@PanTheOrganizer]

Which ones do you have?

[@Mari0o0o]

@@PanTheOrganizer axel foamer and industry ergo

[@yveschapdelaine5240]

Salut Pan, avant d utiliser mon canon à mousse pour laver mon véhicule, est-ce que je peux mettre le produit Brake Buster de P et S dans mon canon à mouse sans l endommager pour laver mes roues. Si ça peux endommager mon canon à mousse ,est-ce que tu Me suggères le marolex industry 1000 ou 2000? Merci de ta réponse

[@PanTheOrganizer]

J'utilise souvent Brake Buster dans un canon à mousse. Ça ne cause aucun problème. J'utilise 60% Brake Buster et 40% d'eau dans le réservoir du canon à mousse. Voir ma vidéo ici: kzbin.info/www/bejne/ZprVqYqsht6fmtU Si tu préfères utiliser une pompe spray Marolex, tu dilues Brake Buster 10:1 (une partie de Brake Buster pour 10 parties d'eau). Pour toute autre pompe spray manuelle, une dilution 3:1 est recommandée.

[@yveschapdelaine5240]

@@PanTheOrganizer merci de tes précieux conseil

[@scubasteve2761]

Hi pan, I brought a marolex ergo master, I used bilt hamber surfex hd in it at 1:10 and somehow left it for about 4 months and since then I can’t get it to spray properly, I have cleaned it out multiple times but it’s still not working, I see you can get a service kit for it, do you think it is not suitable for surfex hd, should I have brought an industry model ?

[@PanTheOrganizer]

You should have purchased an Ergo Industry series (white bottle) as those are more chemical resistant. The green Master series is meant more for regular pH neutral stuff... For more questions, you can ask Sumeet directly at this e-mail: [e-mail] He is the official importer of Marolex pump sprayers and knows his products quite well.

[@scubasteve2761]

@@PanTheOrganizer thanks for the reply, I’ll invest in an industry model, fantastic bit of kit though, I’ll put a service kit in the ergo and use it for something else 👍

[@PanTheOrganizer]

👍🏻

[@shane3744]

These pump sprayers look perfect for my needs! Could the Axel foam sprayer be used to pretreat with a rinseless solution (like what you did with the Industry model in the video), or should it only be used with a foaming soap solution?

[@PanTheOrganizer]

Rinseless washes aren’t made to be foamed. So you would the Axel only for foaming type products.

[@shane3744]

@@PanTheOrganizer thanks Pan, you’re the best!

[@hiroshi2011102]

Should I have dedicated pump foam sprayers for different cleaners (e.g. one for car shampoo and one for wheel cleaner), or can I just use one sprayer so long as I wash it out after use?

[@PanTheOrganizer]

You can just rinse it out after use and reuse it for other chemicals.

[@hiroshi2011102]

@@PanTheOrganizer Gotcha, thanks for the reply!

[@barrydawg7544]

Pan, so can you use the white pumper with Iron remover and spray the entire car down?.. seems that would be good for that. And second question,, can you then rinse out the pumper and put other products in it to use like on the wheels?

[@PanTheOrganizer]

Yes to both questions

[@barrydawg7544]

@@PanTheOrganizer the products look amazing..

[@sicilianfriend4265]

Do I have to dilute P&S Brake Buster in a pump sprayer or can I use it straight?

[@PanTheOrganizer]

You can use it straight, that’s how most people use it.

[@ROBERT-eg4ys]

Pan what color tip are you using on the 3000? I have 2 light blue 1 dark blue 1 white 2 fan tips 1 dark blue 1 light blue . I use it with p&s brake buster full strength and it doesn’t come out like yours on the video should I try 10-1? Thank you

[@PanTheOrganizer]

The tip that comes pre-installed. And yes dilute your Brake Buster 10:1 in that Axel foamer.

[@ROBERT-eg4ys]

@@PanTheOrganizer thank you pan

[@tsyriac]

The storage for the towel at the side of the bucket , can you please state where you got it from ?

[@PanTheOrganizer]

bit.ly/3JoU2ST

[@bossmanseen4807]

Hey Pan, any advice you can lend- my Marolex acid sprayer has Koch Chemise WF in it, but the weighted hose keeps slipping off and falling to the bottom of the bottle resulting in the inability to spray and me having to empty the fluid to get and reattach the hose. I've tried contacting Marolex for advice on this problem but my message isn't going through. Could you lend some of your expertise?

[@PanTheOrganizer]

I don't use WF. I would contact the place where you purchased the Marolex pump sprayer and ask for advice.