SPRAY Paint Your Car (At Home) With Professional Results + (Tips & Tricks)

In this video I show how to use rust-oleums turbo can to spray the bed side of my 1972 c/10.This can will throw down the paint pretty heavy so be careful when using this product. I share a ton of tips and tricks that I've learned over the 20+ years in the custom restoration world. I hope y'all enjoyed this video and maybe it helped answer any questions that you may have had. Ill link all the products below that were used in this video. These links are amazon affiliate links that don't cost you any extra to use. I make a small percentage off of qualified purchases. Make sure you like, subscribe and share with your friends!!!!
Paint Shaker 4000 Video Link • Build your own FREE (S...
Links Below
My Website to buy Shirts www.acdesignsgarage.com
My PO Box Below:
PO Box #782 Troutman NC 28166
Rust-oleum turbo can amzn.to/3UBsYbZ
Mineral spirits Paint Thinner amzn.to/3PXPh94
Red Scotch Brite amzn.to/4aGRdeb
Sprayway Glass Cleaner kit amzn.to/4aMaWt1
3m Mask amzn.to/4a0zrmk
HOSE CLAMP amzn.to/48EO2C8
Sawzall Blade amzn.to/3P6A2ua
Sawzall amzn.to/4bYG7Cv
isopropyl alcohol amzn.to/3WdGPGM
Scott shop towels amzn.to/4demzuG
tac cloth amzn.to/4bgdFv4
3m 233+ 1 1/2" tape amzn.to/3wcdfGW
12 inch masking paper amzn.to/4dhJO75

[@MrKoladge]

Sprayed WAY to close with the can. Do yourself a favor and use a regular can of same color paint for doing all your edges. Then blast it with the turbo can light coats….

[@vetteman95]

I can remember seeing factory paint jobs from late 50's to early 60's that didn't look any better then what you've done here!!

[@briansawdo6245]

Thank you for not rushing through. We need to hear about taping and the right type of materials. When I get to this point I want to try this type of paint job.

[@jeffreysmith3704]

Thanks for sharing your tips and tricks with us! This gives me a lot of ideas for some paint jobs I see in my future.

[@66chevelle1]

It would be cool if you did one side like this with a cut and buff then the other bedside one coat with 2k clear. Then do monthly reviews until you build the truck. Would make a great comparison.

[@josephbragg1162]

That was funny, I always say fungus amongus 😂. Great video and I've watched a couple with this can and I just cannot believe how wide that spray pattern is and how fast it covers. They are definitely onto something especially for people on a budget and want to save a few bucks and get a job done quicker.

[@thefamily_ak1863]

I've learned a bunch , thx man

[@martinbowers852]

that was a lot of work to show us how to do that, thank you for that

[@JamesSmith-hx3lp]

Great video! Looking forward to cut buff and clear coat.

[@stuck1000]

Great tips as always, man. Love the channel. Turbo cans are great. If Rusto ever gets them to spray as finely as regular cans, then they'll really be a game changer. Also, I'm glad you gave the tips about spraying rattle cans and going heavier. My stuff would come out dusty and streaky when I did light coats. Gotta be like a graffiti artist and coat it fully, runs be damned. Be well.

[@tammiroy0]

Well I'm glad you tested it so therefore I will know to try to make one good passing without running the paint because if I try to make a second passing it's going to Orange Peel like crazy thank you for your video and your info do appreciate it 👍

[@jaredwike8584]

Nice video man! Gonna try it on a 65 c-10

[@briananderson4552]

Don't go blaming me for your tinkering.....glad ya decided to film and post it tho ....😊

[@superhawk20002]

Waiting for the cut and buff video. I'm ready with the turbo cans and all the supplies to do a foxbody hood and doors.

[@Ben-rj7xs]

I've been waiting for them to come out with a spray can that does this now they need to come out with a kit of tips that can be changed for the spray you want. I think it does a pretty good job for a can

[@cesareomendez6794]

Came out sweet!

[@wrigleyfield9042]

I thoroughly enjoyed your video. All kinds of tips and tricks learned. Would like to see you add a couple layers of clear coat now. I have a question though. If you were to clear coat over the paint at this point (with all of the orange peel), would you have to sand the paint first, or will the clear hide the orange peel? Thanks again for the video. You've made a subscriber out of me.

[@jamesn.4892]

I was actually digging the satin red!

[@Assemblyrequired749]

Thumbs ups brother 👍🏻 👍🏻

[@jamesn.4892]

I like your paint shaker. Version 2.0 could use a thumb screw style hose clamp.