Cracked Dashboard Fiberglass Repair Painted Candy Brandywine BOX CHEVY CAPRICE HOW TO RESTORE DASH

Check Out My Latest Video Here: "How To Install Box Chevy Caprice Bumper Impact Strips - 1987 LS Brougham Bumper Cushions Installed"
• How To Install Box Che...
-~-
Ms. Ruby / Southern Chevy Tv LS Swapped Box Chevy Caprice LS Brougham Dash Restoration Painted Candy Brandywine
Visit spraywaycustom... for New & Used Spray Guns & Parts
Southern Chevy Tv CHANNEL= / 228chevyboxryder
Complete step by step process of fiberglassing a dashboard for ChevyBoxRyder / SouthernChevyTV LS Swapped Box Chevy Caprice LS Brougham. The dash pad had a lot of cracks from years of wear and tear but that's what comes with restoring Old School Cars. Thanks for the support.... SprayWayCustoms
#CrackedDashboardRepair #SprayWayCustoms #BoxChevy #HowToFiberglassDash #DashboardRestoration #CandyBrandywine #HowToSprayCandyPaint
You can use the same process to
fiberglass dash
fiberglass speaker box sub box
fiberglass rear deck
fiberglass center console
fiberglass tweeter speaker pods
fiberglass kick panels
fiberglass pillars
fiberglass bumper
fiberglass spoiler
fiberglass hood scoop
Endless possibilities

[@SprayWayCustoms]

Here's A Video Of Fiberglass Supplies To Get When Fiberglassing kzbin.info/www/bejne/qaHaZ3V9hcmdmMk

[@BrothaHerb]

My favorite SprayWayCustoms Quote "I'a Cut Chu Back On" Lol, I say it all the time now lol!

[@SprayWayCustoms]

🤣🤣🤣Thanks man

[@Beaux_Dillz]

Facts man!!!😂😂😂😂

[@Binlocloc]

I do it so much now my wife and kids saying it. It’s how I get off the phone now! lol

[@sipdunkin]

@@SprayWayCustoms how much for dash board job

[@jerrellrice3413]

Me too man! I love it! 😆😆😆

[@abgcell820]

I see sprayway pop up I click! 🐐

[@SprayWayCustoms]

That's what's up 👍🏾👍🏾

[@earnestanderson8377]

@@SprayWayCustoms you do a he'll of a job.i want to try it out when I get the courage u make it look easy!!

[@78chevyboi]

Bruhhhh I gots to take my damn 🧢 off to you, you a bad man, good at and take pride I. What you do! It’s a lot of prep and patience that goes into what you just done! 🎯 🎯 Keep bring the 🔥🔥🔥 #stayhumblestayprayedupstayouttheway ✌🏾

[@SouthernChevyTv]

The OG has spoke

[@SprayWayCustoms]

Salute to the Box Chevy OG....you paved the way and inspired a lot of us 🤝

[@bostonbox6835]

Like I said before like a fine wine that just keeps getting better with time the art of protection

[@bostonbox6835]

I meant the art of perfection

[@SprayWayCustoms]

Thanks Chandler

[@bostonbox6835]

Hey man I tried to hit you up about a dash and the server said no address found

[@williamclemons3257]

I figured it's about time for me to give you some props. I've been watching you for a few years now you be throwing it down my brother.

[@SprayWayCustoms]

I know I have a lot of supporters who just watch and never comment. I appreciate you all 🤝

[@sinformant]

Man that finish is like glass!

[@SprayWayCustoms]

Thanks sinformant

[@Grant7]

This video hit different-- this felt like a classic Sprayway video...good job my man...

[@SprayWayCustoms]

Thanks G7. I really appreciate all your support

[@lilmantwins1701]

256 done did it again... Man you bad with that... Much respect... Huntsville showing love to Decatur

[@SprayWayCustoms]

Thanks for the 256 support

[@lilmantwins1701]

Always

[@stizzywomizzy5322]

13:50 😂 🤣 “if you try to do this by hand.... you’ll give up fiberglassin “ You ain’t never lie.. SprayWay All Day 💪🏾

[@tamalbailey907]

This was straight from the heart truth bc ever since the first few videos especially the ones he did on the purple doors, so much work was put in hell the video was over an hour and was done in real time. With fiberglassing if you don't have the patience it won't get anywhere. He just make it look so easy too. Big props to SprayWayCustoms💯💪💪💪💪

[@SprayWayCustoms]

That's a fact...it takes a lot of patience

[@trevintaylorthe6_7veganttucke]

🤣🤣

[@twinny4hunnid628]

Sprayway you keep putting these out and my dumb ass gon try to do mine. Y'all pray for my Chevy

[@SprayWayCustoms]

I'm here if you ever run into a problem 🤝

[@ericbarcenas8154]

@@SprayWayCustoms Do u have a number or some to see if u could custom my interior ?

[@DIYWithTheRichardsons]

Got my pizza and soda im ready for this epic movie 💪🏾💪🏾 man im speachless awesome job family!!

[@SprayWayCustoms]

Thanks for all the support family

[@PHARRAWAY]

That looks killer brother nice work

[@SprayWayCustoms]

Thank you PHARRAWAY

[@Loyalty_901]

Straight beast with it. Amazed everytime the outcome of every project you tackle. Keep up the good work fam 💪 💯

[@SprayWayCustoms]

Thanks Mike

[@nearheaven5311]

Ms. Ruby is going to be singing a totally new song by the time you are done with her. Very well done!!!

[@SprayWayCustoms]

🤣🤣🤣Thank you

[@XXX-qk2cq]

Spray I have used an air DA for decades but I saw your PorterCable electric DA and I bought one at the Depot. It’s great! Variable speeds and heavy duty brand name. Much more comfortable then the air tool and a lot less hassle!! Thanks for the tip!!!

[@SprayWayCustoms]

I know. I never use my air DA unless I'm wet sanding. I've been using the same Porter Cable for 6 years and it's still ticking like day one with no problems. You'll see it in every video going to work 💪🏾

[@npjsog1732]

Shots out to “RONDO✊🏽amazing product sprayway 💰

[@SprayWayCustoms]

Thanks 🙏🏾 Rondo the Boss

[@sudashinpillay5561]

I'm so glad your videos came up as a recommendation Your work is a piece of art You taking drab to fab like it ain't no thing

[@SprayWayCustoms]

I'm glad you gave me a shot

[@ramonrivera5467]

That dash was so hurt it was a reject from the junkyard cuz you can't recycle foam I'm sorry i had to crack on it keepingit real you did a very good job thank you for protecting the planet

[@SprayWayCustoms]

Thanks Ramon

[@kevingathers4845]

🤣🤣🤣 trying to sand that by hand you'll give up fiberglassing!!🤣🤣🤣 Truth!! Lol..Haha. Man your tutorials are great big up's to ya sprayway. 👍😎

[@SprayWayCustoms]

Thank you Kevin

[@mikecrawford715]

That is pretty cool a good alternative to recovering because these days it’s getting tough to find traditional dash restoration

[@SprayWayCustoms]

I agree with that Mike

[@dv8r23]

Only you can sand to “We are the world” and get away with it! Hahaha you best my man! Another amazing tutorial! Thank you SprayWay!

[@SprayWayCustoms]

🤣🤣🤣thanks Scott

[@bomcdaniel8311]

SprayWay is a poet in that paint booth, Another master piece!

[@SprayWayCustoms]

Thanks family

[@duhwolf6413]

This is what happens when you cross an artist with a magician. Perfection as always!

[@SprayWayCustoms]

Thanks

[@TahoeSteve]

From junk to showroom amazing. You did it again.

[@SprayWayCustoms]

Thanks Steve

[@Pushyhog]

pushyhog is with ya, l learn here.

[@SprayWayCustoms]

Thanks 🙏🏾

[@johnyurko526]

That's so nice how you fix broken dash boards and make them look new . With your personal touches. So Cool ...

[@SprayWayCustoms]

Thanks John

[@ceedell]

Wow! A lot of work and that came out beautiful! You are the Candy Man!

[@SprayWayCustoms]

😃Thank you

[@vocals4378]

Man you can come pick the Chevy Caprice up and just Holler out Walla and whatever you do to the car's is off the chain just amazing how much time and effort you put into your work fiberglass is your specialist

[@SprayWayCustoms]

Thanks Vocals man, I appreciate that

[@bigvell02]

Love the process bro. I feel you on trying different methods / doing it different all the time.

[@SprayWayCustoms]

Yes, I never do one dash the same. I'm always switching it up.

[@stevenwoods5090]

Thank you spray way for showing me a lot of things I did not know watching your episodes teaches me a lot I was not into automotive like that until I seen the things that you do that makes it easier thank you for your education

[@SprayWayCustoms]

Glad to help

[@trayway1091]

I'm literally in the garage right now working on something similar I'll send you pictures of my progress

[@SprayWayCustoms]

Ok then fam

[@andrewsimpson3194]

I'm binge watching your videos one after another. Beautiful work man!

[@SprayWayCustoms]

Greatly appreciated

[@tboneo2005]

I need my 87 cutlass dash redone its all messed up

[@SprayWayCustoms]

Scotti DuGotti I'll be doing a Cutlass dash real soon because mines the same way

[@tboneo2005]

@@SprayWayCustoms hell yea can't wait

[@markopolo286]

I hv an 87 cutlass dash i need done also

[@soeasypressurewashing6204]

I have a 85 C10 dash that need to be done.

[@BrothaHerb]

I love how that primer goes on!

[@SprayWayCustoms]

Yes indeed

[@MrWhytboi]

Like the video before I watch it.... cuz I already know this dash bout to be 🔥..... bruh be making dashes look how they should have came from the factory

[@SprayWayCustoms]

Thanks man

[@niceguy1287]

I have been watching hours of your video, serious skill, work ethic and pride in workmanship. Big fan now

[@SprayWayCustoms]

Thanks for the support

[@smoothreleaserecords2181]

Too clean 🔥🔥

[@SprayWayCustoms]

SmoothReleaseRecords thanks

[@anthonymurphy1904]

@@SprayWayCustoms where you located..I need to be put in the game like this

[@kamranetemad4968]

SIR I thank you for this presentation. My third gen camaro dash just got redone the same way you teached.the dash looks new.THANK YOU.

[@SprayWayCustoms]

Thanks man. I'm working on a Third Gen Camaro now

[@thazsar]

Man, another work of art!

[@SprayWayCustoms]

Much appreciated

[@sonnyblazer5504]

God gave you a gift - your mind connected to your HANDS! Great job, my man! Hell yeah!!! Sonny (CT)

[@SprayWayCustoms]

Thanks Sonny

[@MrWhytboi]

👀 bruh that dash 💦.... nice bro. I wanna do that deep red or a orange on my 88 rx7

[@SprayWayCustoms]

Ok fam... thanks 🙏🏾

[@88camaroman]

I have never worked with fiberglass, but every video I watch of yours ( makes me want to find a project to use it )

[@SprayWayCustoms]

Let's get it then Charles 💪🏾

[@MEANGENE]

damn that looks good spray 🙌💯

[@SprayWayCustoms]

Thanks MGC

[@MEANGENE]

@@SprayWayCustoms no prob spray✊

[@gabrielsantibanes5240]

Hey bro from El Paso tx .. doing it thanks to your videos..almost done on mine.. from a 1977 Buick regal..

[@SprayWayCustoms]

Thanks Gabe

[@87ChevyCaprice]

Sprayaway has done it again with another 🔥🔥 video flawlessly as always

[@SprayWayCustoms]

Thanks again Pete

[@87ChevyCaprice]

@@SprayWayCustoms call me fam

[@SprayWayCustoms]

Ok 👌🏾

[@OldSkoolF]

I think Brandywine is one of the best... Job came out excellent....

[@SprayWayCustoms]

Yes it's in the top for me also

[@ClevertymeZ]

Hey *SprayWay* _SprayWay_ ~SprayWay~, I need some work done. How does one contact you?

[@SprayWayCustoms]

What you got? I might can squeeze you in.

[@paintfreak9420]

Pressure applied 💪🏾

[@SprayWayCustoms]

Thanks

[@BrothaHerb]

I was looking for RONDO in walmart LOL

[@SprayWayCustoms]

I need to put it on the market 🤣🤣

[@williamalley4976]

I watched and learned a lot from your videos and painted My Motorcycle using your method. It came out great and I get a lot of you didn't paint that. Thanks' Man for the knowledge. Candy Apple forever!

[@SprayWayCustoms]

No problem William

[@carringtonmadden2160]

Bro I’m waiting on u

[@SprayWayCustoms]

👍🏾👍🏾

[@ericevans2127]

Sprayway i seen kats on KZbin claiming they can paint and fiberglass. They work aint clean as yours. You're the best by far

[@SprayWayCustoms]

Thanks for the compliment Eric

[@2000BIRD]

🤮 Smh just NASTY!!! Best 1 so far Spray! 👏🏾👏🏾👏🏾 SALUTE!!!

[@SprayWayCustoms]

Thanks for the support

[@2000BIRD]

@@SprayWayCustoms Wuz up Spray! How's ur schedule looking? When can you do the dashpad on my 77 regal? I kno u buzy and i preciate ur time and help bro! ✌🏾💙💰

[@grimson]

I watched every minute despite having no intention of ever doing this. So satisfying to watch this level of work.

[@SprayWayCustoms]

I really do appreciate that

[@makinithappengarage1488]

🔥🔥🔥 what's the pric? Want mines done..

[@SprayWayCustoms]

I'll have to get caught up and then I can take care of you

[@makinithappengarage1488]

@@SprayWayCustoms ok just let me know!!! Thanks🙏🏾

[@DWillBGBodyPerformance]

Always improving your craft. That's what people do that enjoying their job/hobby always finding new/better ways to perfect their craft. Master mind/tradesman

[@SprayWayCustoms]

Thanks D Will

[@tommygott5467]

Thanks for your videos, love your work. So much better than others. They just show a time lapse video where you actually show how its done. Thank you from the do it yourselfers. Keep up the good work. I found you about a week ago and watch more every day.

[@SprayWayCustoms]

Thanks Tommy. I'm glad you found my channel

[@demondray]

Prep work flawless! Straighter than factory!

[@SprayWayCustoms]

Thanks

[@bonedry3245]

Hands down. You don't be playing no games man

[@SprayWayCustoms]

Thanks

[@vanrijn1669]

That’s out of the park. Grand slam to boot. Great patience and skill combined with a craftsman’s willingness to get it right. Awfreakingsome.

[@SprayWayCustoms]

Thanks Mick

[@chriscurry236]

Not surprising that you are busy busy!, Your exceptional work is the best!! Keep at it man!!👍

[@SprayWayCustoms]

Thanks Chris

[@patricksmith3761]

Mane! that there is the REAL DEAL PLAYER!

[@SprayWayCustoms]

Thanks Patrick

[@onemanbodyshop]

Amazing work as always Sprayway you have them lined up and knock them down, i learn something new every time I watch thanks Sprayway

[@SprayWayCustoms]

I be trying fam 💪🏾

[@tonymaciel1887]

Wow 👏 thank you for sharing I could leave the dash in the sun 🌞 and stare at it all day! Great work one day I'll try to do mine

[@SprayWayCustoms]

Thanks Tony

[@jeffgoswick7660]

From trash to a ungodly masterpiece #sprayway is the master

[@SprayWayCustoms]

Thank you Jeff

[@BrothaHerb]

Thanks for explaining thelow spots high spots! It makes more sense to me now

[@SprayWayCustoms]

No problem at all

[@FAHeiss]

Man, that dash is crazy messed up before you fix it. I was thinking no way you could fix that. Awesome!

[@SprayWayCustoms]

I'll give it my all. Thanks 🙏🏾

[@MrDjscotteb]

Great work my dude. Double stick foam tape works good to for making gaps. And raising the grills. If you like trying new stuff.

[@SprayWayCustoms]

Thanks for the info

[@dw4563]

King of the box Chevy dash ! 👍🏾

[@SprayWayCustoms]

Thanks D W

[@michaelmorris5116]

Brother, you are blessed. Your work is beautiful. It shows you really love what you do. It's the only way. Thanks for the vidoes.

[@SprayWayCustoms]

No problem Mike. I appreciate the support

[@Beaux_Dillz]

Ain’t even seen video yet SprayWay just the thumbnail alone 🔥🔥🔥🔥🔥🔥

[@SprayWayCustoms]

I'm glad to see you stop through and showing love 🤝

[@Beaux_Dillz]

SprayWayCustoms how do we get in touch with you??

[@flyman23100]

I’ve been looking at your work for 3 years now and you still cold whit your work keep up the good work sir

[@SprayWayCustoms]

Thanks for the support

[@LSJUAN]

Spray I been watching your videos for years. I been saying that imma start doing some work on my car and I finally made the leap. Thanks for the motivation. Your videos help a lot.

[@SprayWayCustoms]

That's what's up LSJUAN

[@WildChild8080]

I was starting to worry about you boss. Once again you killed it.

[@SprayWayCustoms]

Thanks Adam 🙏🏾

[@gorgeousdzastr]

Dude You are an awesome artisan !!! I am an artisan myself but different medium. I once did paint and body MANY years ago. If you had a video holder that attached to your shoulders or something, that would help you video your work too. Good luck in your endeavors. Cheers!

[@SprayWayCustoms]

Thanks for all the support

[@burn153]

Killed it again Sprayway!!! Can’t wait to see the whole whole car finished! After I made my dash video everybody hitting me up to do their dash too!!

[@SprayWayCustoms]

I appreciate you TNT / Tony....When I was doing the C10 dash, I had all your vids on repeat 💪🏾

[@burn153]

SprayWayCustoms My Man!! 😎✊🏾

[@apexpredator_jku]

Damn...mad props for putting in that work because I wouldn't have even considered doing all that. I would've just used that as a template, some mdf and chip board and fabricated a new dash...and even that would be reaching. These new age shops would just take a 3D scan of the old dash...cad files, cnc router or even 3D printer a new dash. Alk this manual fabrication gon be a lost art within the next decade.

[@SprayWayCustoms]

Thanks for checking me out and leaving a comment

[@rudyflores9395]

WOW SIC AF but in a good way speechless sir your work is just plain AWESOME sad part you make it look so easy again sir you ROCK that GUN. God bless you and your talent.

[@SprayWayCustoms]

Much appreciated Rudy

[@novachannel1981]

i like this guys attention to detail

[@SprayWayCustoms]

Thanks

[@nextlinkzcustoms6329]

You have a serious gift for what you do family. Keep doing your thing by all means Necessary!!

[@SprayWayCustoms]

I'm gonna try my hardest. Thanks

[@newlanky2]

this job was so good i had to watch it again, real nice man.......

[@SprayWayCustoms]

Thanks Thomas

[@DonWonn25]

SprayWay w/another banger!!! Tht joint came out great!! Keep blessing us my G!!!

[@SprayWayCustoms]

Ok... thanks

[@ramonrivera5467]

Good Lord you did miracles with that dash you couldn't buy a brand new one that look even better

[@SprayWayCustoms]

Thanks 🙏

[@caandone9655]

Bro you murdered that dash. You are a Legend to the game! Undisputed!

[@SprayWayCustoms]

Thanks

[@danteisme]

That color is amazing, love it - excellent work!!

[@SprayWayCustoms]

Thank you

[@bombtownrecordz4383]

Raw, uncut, dope, love it... my g

[@SprayWayCustoms]

Thanks 🙏🏾

[@charlesturner7016]

Amazing skills and workmanship

[@SprayWayCustoms]

Thanks Charles

[@The88katana600]

1,000 times better now .. you make that look easy bro. thumbs up

[@SprayWayCustoms]

Thank you for the support

[@j.r.thompson5950]

You are the king of dashboard repair. I followed your instruction and mine came out extremely good.

[@SprayWayCustoms]

That's great. I'm glad I could be a little help to you 🤝

[@workingmansrestorations7071]

Awsome video. I am doing a k5 blazer dash now. I laid glass and smoothed out... I have a few problems... But it's coming along

[@SprayWayCustoms]

Glad to know it's coming together. Thanks 🙏🏾

[@Buckswoodshop]

Look at that finish! Excellent work

[@SprayWayCustoms]

Thanks Matt

[@isaacbowers9493]

Great Job always your videos can't wait to see the final results on the box Chevy

[@SprayWayCustoms]

Thanks Isaac. It's coming

[@jamesobert8972]

Brother. Dang. I have to tell you that you inspire me. I just finished molding my door panels with your inspiration. Stock 3rd Gen camaro with the plastics from a 4th Gen firebird. I'm painting some of it and wrapping the rest. Thank you so much

[@SprayWayCustoms]

That's great James. I'm glad I could help you out man

[@haygood9]

Hope you have someone under ur wing to carry on this kind of perfection and pride in ur work. U are a dyeing breed bro. Keep it up

[@SprayWayCustoms]

Thanks man

[@yeigotem]

Homie had the sun dancing on that dash... #RESPECT

[@SprayWayCustoms]

Thanks Jay

[@DR-sv4we]

I'm going to do this to my 72 chevelle. Thanks for the tips!

[@SprayWayCustoms]

Great... thank you

[@joelvallejo7451]

Your work is amazing you do good job of saying how to do it step by step and showing the process of how things are going to be to getting them done I have a dashboard from a 87 Pontiac firebird and watching these videos I think it's not going to be as much of a challenge now from what I learned thank you a lot

[@SprayWayCustoms]

Guess what....I'll be uploading a dash repair video today on a 88 Camaro Third Gen.....thanks man

[@rydazzfirb6731]

I’m so motivated too dew some work thanks brotha your video might be long but it’s simple and step by step👌🏾👌🏾🔥🔥

[@SprayWayCustoms]

Great…thank you

[@Narcolepsykid]

Can you do/have you done Product review videos? Like a rundown of what you use and why. Tool list. Resin and filler mixing techniques and tricks.

[@SprayWayCustoms]

I can do one