Springer air rifle accuracy problems revealed

[@Gazwan2]

I have a problem with my scope Descovery vt_z 6_24x44 sf When zoomed in, the reticle moves to the right What is the problem and can I fix it myself?

[@joedejesus6363]

Thanks for that great Video, I really leaned something today, especially what the inside of a scope looks like. Thanks this information, it will certainly come in handy one day.

[@NOBOX7]

Your welcome friend , glad to help

[@airgunnersc9335]

Can you turn the tube if the cross hairs are not aligned with the adjusting nobs? When I sight through the scope the cross hairs are not perpendicular and verticle. This is a very informative video.

[@NOBOX7]

you can open it and turn the tube

[@adilshop9711]

I'm from Indonesia, can you please help make a video on how to open the leupold rifle scope, because it is very strong

[@sportsandautomotives4739]

Which discovery scopes very good for PCP sir?🤔

[@NOBOX7]

PCP is very easy on the scope , you could use any good scope you like with no damage

[@jdog4534]

Springers are more harsh in scopes than 3006 or 7mm mag due to the whiplash effect the spring produces. I wrecked many scopes and sights on my springers. There are some scopes that are designed to handle that whiplash action. What I found to work best at eliminating the problem was by switching to PCP air rifles. I haven't wrecked a single optic since I got my FX REVOLUTION.. lol the new issue I face is getting my scuba tanks topped off at 4,500psi.. lol

[@jamesmarcum1364]

did the goop help? I've got three scopes that won't hold. Two on gamo's. Need a fix!!!

[@NOBOX7]

+James Marcum yes james if you dial in your scope and then glue the recticle in place it will not move again , now this will lock the scope forever but hey its better then a scope that doesnt work at all. you need to glue it in 2 or 3 steps or it wont dry well . i highly recomend doing this . some time i will do an update video just havnt had any time

[@lucaspoupard2451]

Thanks for the information I rally learned something today.

[@luisvazquez254]

can you wrap tape around the tube

[@NOBOX7]

its possible , any thing that will wedge it in place should work , but i dont recommend tape , maybe some black tape wound really tight might do it . let us know if it works or even if it doesn't

[@salahudinalayubi8028]

Kenapa dipotong? Dipanasi dulu di atas api

[@melvernyang8955]

I hope the scope maker saw your VDO. What brand was it?

[@patrickmcginty549]

I am not sure that permanently gluing the scope into a fixed zero is a good idea! If you ever un-mount the scope you wont be able to adjust it again. You could use mounts with a damper built in.

[@mrsaezs]

Thanks for share ! very good information

[@rolandomartinez9299]

what gun were you using

[@NOBOX7]

GAMMO varmint hunter, do not buy this gun

[@NOBOX7]

***** the rifling in the barrel is very faint , you can hardly see it and i think thats part of the problem with this gun , secondly its junk the seals are junk the ramb is junk the trigger mech is flimsy and its made in china , dont buy any thing from china its a prop junk , its made to look like a product you want but performs horrible and breaks down when you need it most

[@justliketolook]

That's why I have the rws bullseye mounts on both my guns . Bye this once and you never bye a scope again and the scope doesn't have to be airgun rated I have it on one of the hardest kicking airguns made the Hatsan 125 sniper springer the scope I have on it is a Sightmark triple duty 10-40x56 monster scope 15 inches long with out the shade . This gun busted every airgun rated scope I put on it . But with the rws bullseye mount that has the built in recoil springs I have had no trouble at all . Trust me just get one .

[@lucaspoupard2451]

Thanks so much for the info I will have to save up for one of these, because it is way too hard to find a decent priced air rifle rated scope that can withstand the recoil of my Gamo Big Cat Whisper 1300. Thanks again.

[@justliketolook]

The gun you have has now where near the reverse recoil of the Hatsan so it will differently work on your gun . You can order them straight from Umarex www.umarexusa.com/

[@lucaspoupard2451]

justliketolook thanks 👍

[@NOBOX7]

I will definitely look into that

[@helpinghandalmere1]

nice explanation, why don't you put a bus in it so that you fix the location of the barrel and it can't walk toward the eyepiece.

[@NOBOX7]

yes on my next gun i intend to do this

[@b.manoharan9456]

Hai dear this is B Manoharan from India, tamilnadu state, Namakkal dt,am Interested in the subject...pls update

[@supressorgrid]

Nothing a little JB Weld and duct tape cant fix.

[@GhettoRanger01]

A big fucking mystery solved, thank you!

[@NOBOX7]

lol

[@PaulOgie]

Shit, I thought a scope was full of prizms and rods and levers and pivots and it's a fuckin shitty tube and a sliver of metal. Wtf? No wonder they suck...

[@NOBOX7]

LOL right and the shitty tube moves every time you shoot the gun , so from now on im sitting the gun and gluing the dam gutts in place

[@patrickmcginty549]

PS. Liked the video. :)

[@m3sca1]

I once repaired an air rifle scope with human hair because the cross hair wires had become disconnected from the inner cylinder.

[@NOBOX7]

LOL i believe that comment coming from you , very good idea , maybe i shouldnt of trashed the scope

[@luisvazquez254]

yes Will work just make sure is tight anugh and center

[@melee401]

I can't believe you used all this time and video and just tell us a springer trashed your cheap scope.

[@NOBOX7]

you idiot i was showing that a springer rated scope failed and then your pis poor attitude comes along and makes us both look bad , thanks jerk

[@keithwilliams8807]

That's not a gun it's a scope!!!