Making a Single Loop Holster Episode 1

Lets make a Holster....and while we are at it we will show how to make a pattern for the gun.
The gun we are using was lent to us by Gaunt Leatherworks. They specialize in holster making. gauntleather.com/
Join Denny for the first part of this three part series. In this part we will go over how to make a pattern for your gun and how to make sure that you have a great fit. The holster we are making is called a Single Loop Holster. It is similar a Mexican Loop Holster, but we just make an actual piece instead of cut a loop out of the holster skirt.
What we used in this episode.
Head Knife: www.springfieldleather.com/Kn...
Non-Skid Ruler: www.springfieldleather.com/Ru...
Compass: www.springfieldleather.com/Co...

[@invictusbp1prop143]

From the perspective of a leather worker, this is an excellent video that can help anyone new to the craft to avoid a lot of headaches, mistakes, and do-overs. Outstanding information. From a shooter’s perspective, I can’t get down with a holster that doesn’t do one of the two jobs of a good holster…. Protecting the trigger is a must for any holster, even one worn outside the waistband. I understand if this holster is used for cowboy action shooting quick draw exhibition or something of the sort, an open trigger guard may be acceptable, or necessary. But any holster, in my opinion, used for any practical purpose should have an enclosed trigger guard.

[@CannabianCowboy]

Happy Father's day and thank you for your knowledge

[@jimhuskins8506]

Excellent video. Clear instruction from an expert. Adequate videography. Best of all, NO ANNOYING BACKGROUND MUSIC. Thanks.

[@bobbybranham4830]

I came into the store for the first time on feb. 4 th . I found alot and im very pleased with the quality. Glad to find this site thank you.

[@JustBeAdude]

I have to say that in all my searching, you just gave the best template tutorial that I have come across. Thank you for sharing your craft. Cheers.

[@CannabianCowboy]

Excellent creative design and craft man ship !

[@harleylaci]

This video series was esential help for me. I wanted to make a holster for my uberti cattleman, found these videos. After first watch I said no way I can do this, than I changed my mind, at least I will try. The first holster accidentaly came out perfect. Than I make a left hand version, than a cross draw, than one for my 1851 navy, than for my fathers 1858 remington, and two cartridge belts. All perfect! I used all the 1 sqare meter of leather board, I have purchased. The water and glass “trick “ is very very usefull, it changes the leather from a soft limp state, to a firm rigid one, exactly what is needed for a good solid holster, altough I dont have the special tool, so I used a glass ashtray. Thank you for this series, you saved me a fortune on buying holsters, and taught me a new skill, that now I am proud of.

[@SpringfieldLeather]

This is amazing to hear! We are so glad that you pushed yourself into giving it a try! Thank you for telling your story and sharing it with us! We hope you continue leather crafting!

[@pfitz671]

That's a great looking holster. Nice job.

[@UniqueLeatherWorking]

Denny you are amazing. You explain everything so well I can not wait for part 2. I wish I had a part of the knowledge you have just forgotten over the years.

[@SpringfieldLeather]

We hope to have it out by the end of the week.

[@j.sumner6999]

The problem with a loop holder is the loop. the holster just hangs off the belt and tends to move laterally. Tying it to the leg keeps it approximately in place, but not exactly.

[@samuele.4630]

The production quality of your videos are getting better and better! Love the new intro as well! All those little details really do make a difference ;). Keep up the great work!

[@SpringfieldLeather]

Thanks Samuel! We have really been trying to make improvements. We enjoyed making the new intro...glad you liked it!

[@shutterdug9935]

Thank you very much. I have made some holsters for myself and my friends, but not this style. I am making a quick draw holster for another friend, and your video really helped me to get my templet started. The holster came out great, and after watching your video, it was a breeze.👍

[@utubeu8129]

I will stick to me x-acto knife Thank you. Whew!! Thats like watching my x use a chef knife to peel potatoes! Lol!!

[@dave5176]

I make my welt fit the gun exactly so that the gun remains in the exact same position / height in the holster every time. I use saddle skirt leather for that. (thick leather).

[@terrelll.howard8660]

Nice job.

[@judithbarnstablegary8007]

Thank u Denny

[@mikemarshall3765]

Brilliant work. I am surprised he has all his fingers after working with that round knife. Mike UK

[@SpringfieldLeather]

Mike he sure scares us some times!

[@mamabearsleatherworks3546]

Awesome video!! Thank you!

[@mikepettengill2706]

rocked it! Thanks!

[@johnnylgulledge6899]

Looking forward to the next video!

[@SpringfieldLeather]

Coming SOON!

[@_BigLife_]

I truly enjoy the videos and the information. I do have a question. If I were to Cement 2 pieces of leather together, one as a liner, and to get the thickness I wanted, would I be able to wet mold the 2 cemented pieces? I'm thinking a 3 oz and a 4 oz piece cemented together to get the thickness I'm looking for.

[@robertguy6620]

Hey Denny Great video! If I wanted to turn this into a cross draw holster how would I do that? I also was curious if you guys would try to make a video on making a small of the back holser. There is very little information on making that type of holster. I have pattern packs for the avenger and to slot holsters and I've tried to watch several videos on the Internet but nobody does them very clear. I enjoy watching your guys' videos because you take the time to explain the nuances and show the details.

[@SpringfieldLeather]

Robert, we will plan on a video and get your questions answered on the small of the back. Also, maybe we will do a follow up to this series about doing different draw types and how to go about it.

[@flashpointbravo]

To make this a crossdraw, cut off the portion of the paper pattern that folds over to make the skirt and cock it over so it doesn’t extend parallel with the barrel, but diagonal to it, opposite the direction of the grip, then tape the paper in place. That way when the fold over piece folds over to make the belt loop, it is diagonal. When the pistol hangs diagonally rather than straight up and down, it’s a crossdraw. Hope that helps and makes sense. I’ll email pictures if you want just respond with an email address.

[@dave5176]

@@flashpointbravo I like to make my holsters a little on the diagonal leaning back for cowboy fast draw too. Just fold the pattern on an angle instead of a 90 degree fold. Simple.

[@watcher6286]

Hilarious intro

[@richardvanbenschotenc9455]

Denny how can I stretch my holster that is completely finished. It’s a slim Jim and a little too tight on my cap an ball revolver. Thanks for all your knowledge.

[@safarileif]

what kind of revolver? I like the round handle.

[@gpickmovies]

How much extra is needed to the pattern to allow for a lining? From Glen in Texas.

[@oldschooljack3479]

Very well done. Thank you. I like that round knife... What brand is it? And do you sell it?

[@SpringfieldLeather]

We have the link to the Osborne Head Knife in the description. Which is the knife Denny was using for his cuts.

[@greyviking2412]

Please, Please do a follow up for "Making the Belt" video.... !

[@SpringfieldLeather]

What would you like to see made?

[@greyviking2412]

@@SpringfieldLeather How to "Size" the belt for waist sizes, How align / space the bullet holes to weave a lighter weight leather through, What is a good "Drop" on the holster (where should it sit on the side hip / vice hand placement), How much over lap of the belt should be there with regards to how / where to stich the buckle and hole strap, How to do a backing piece on the back side of the belt with lighter leather (how pre-curve it and glue / stich it) so it is already in a round shape. Thank you for all you do for the leather community... We are out here watching you guys! Cheers!

[@kansasflyboy]

Yes! Please do the belt that this holster was on!

[@SpringfieldLeather]

@@greyviking2412 Hopefully this video will get you an idea of how we size belts here. kzbin.info/www/bejne/b5uxap6CZdulqdU As far as the other questions. We have Kevin, Denny, and Clayton answering them. Some of them will require a video to better explain

[@lykeju]

I understand the welt for a knife sheath, but why a holster?

[@adama1830]

How do I make this for a left hand I’m new to leather making

[@devindarwin9878]

What kind of paper are you drawing the pattern on? It looks thicker than the masking paper or butcher paper Ive seen around. Ive always used file folders, since the thickness is nice, but having to tape them together for larger patterns gets tiresome.

[@SpringfieldLeather]

This is just brown paper that is about the thickness of a file folder. It came wrapped around some leather we got. No real source for it...yet.

[@colefambrough210]

Thanks for making this video! How would you do this if you want the slick side to be showing?

[@notchguy3937]

For the regular side, you would basically do the same same but the opposite of what he cut out of you’re referring to this video. I’ve made plenty with the slick side showing

[@colefambrough210]

Notch Guy oh ok. Could you flip the leather over to where the smooth side will be on the main part and the flesh side on the belt loop?

[@notchguy3937]

Cole Fambrough can you please be a bit more specific with “the main part”

[@colefambrough210]

@@notchguy3937 like on the main body. The slick side would be showing for the main body. And the flesh side would be showing on the belt loop

[@user-bp8cm8vb8l]

Красота

[@salvatorerossitto4760]

Si può fare una fontina e pistola in miniatura?