SPROCKET DRAWING PROCEDURES with CAD

[@amrmansour4947]

This is wonderful , I tried it and it worked . thanks alot for your video and explanation which made it easy to draw the gear . it helped me alot , thanks again and God bless you

[@likeit173314]

Thanks a lot for this helpful video! All loves from India.

[@antonym6972]

Rick, Very Informative Video!! Do you know what is the related ISO standard for making a sprocket (either forging / milling)?

[@antonymohan3281]

Very useful Video Rick!! Could you shed some light on the ISO standard used for designing the sprocket ?

[@RickTaylorpopnstart]

I downloaded the software, scrolled for the standard sprocket parameters and picked the #40 sprocket. The #40 sprocket roller diameter is .3125 inches. Thats correct according to the Machinists Handbook, but the software creates the dxf sketch with a .3125 diameter roller pocket also. That would work in a perfect world, but there is endmill push-off, machine tolerances, chain pitch tolerances, etc. that would prevent the chain from working on the sprocket. Machinists Handbook explains. Later,RT.

[@Gallardo6669]

Unfortunately I don't get the explanation. Would you be so nice to do another video on that with a spoken more detailed explanation??? Thanks a lot

[@RickTaylorpopnstart]

@FdelaOpera , yeah, i have other videos that demo drawing TRUE INVOLUTE internal and external spur gears. Good luck.

[@likeit173314]

Sir Rick Taylor, I Would like to draw 16 teeth - 3" Sprocket with roller dia 1.25" for CNC programme(For teeth cutting) Please tell me Can I follow the same instruction?

[@RickTaylorpopnstart]

1.25" roller is too big for that size sprocket, especially with 16 teeth.

[@likeit173314]

Sir as per my info. 1.75" Std. roller dia. for 3" pitch sprocket , we already cut this sprocket on milling 1 year b4 but we want it cut on CNC milling so ple. tell me can I Follow ur instruction?

[@RickTaylorpopnstart]

no

[@samjab688]

how did u draw spokes and the bore?

[@RickTaylorpopnstart]

I used the LINE command, the FILLET command, the CIRCLE command, and the RECTANGLE command. Then, I used the TRIM command.

[@samjab688]

Can u specify the dimensions of the holes please specially the hole that 21 tooth #40 is written on it? Are the dimensions of the hole of standard size? Can u send the link of the file or the site u used to make the sprocket? I remember seeing on the net but cant remember where

[@abhishekdas5520]

NEED TO MAKE A SPROCKET HAVING 162MM PCD, 6x42 MM(DAIAxPITCH) OF CHAIN AND 6 TEETH. CAN U PLEASE HELP ??ME OUT

[@josephcoraje7004]

ANY ONE CAN TEACH ME HOW TO DRAW A CIRCLE THAT INTERSECT THE THE LINE

[@likeit173314]

sir use circle TAN TAN TAN Method

[@MrBipin66]

nice

[@zx3slack]

Or use sprocketeer and generate the drawing in 20 sec :p