Squarebody suspension rebuild! QA1 coil over conversion kit install!

In this video, we rebuild the steering and suspension on our 1985 GMC Sierra Squarebody C10 using the coil over conversion kit from QA1!
Please consider supporting the channel by becoming a member today! We greatly appreciate each and every one you!
/ @hammersgarage
Let us know what you think;
[e-mail]
Or put something in the snail mail;
Hammers Garage
PO Box 56
Nicholson GA, 30565
Instagram;
hammersgarageyt
#QA1 #coilovers #squarebody #ridetech #wilwood #godriveit
www.qa1.net/automotive/suspen...
www.speedwaymotors.com/RideTe...

[@jaybridge9723]

Great videos, love following Winston’s progress.

[@hammersgarage]

I’m glad you like the content! Thanks for watching!

[@713_billetboy]

Nice work

[@hammersgarage]

Thanks and thanks for watching!

[@aristhompson8083]

Very nice content. Gives me confidence to tackle this project on my own!

[@hammersgarage]

That’s great to hear, thanks for watching!

[@sugarbear9420]

Good detailed description 👌

[@hammersgarage]

Thanks for watching!

[@gulfdawg2806]

🤑🤑🤑🤑🤑

[@hammersgarage]

Yeah that QA1 stuff is pricey…good quality tho!

[@Durham9191]

Anyone know what size hole you have to cut to make the coil overs fit?

[@hammersgarage]

QA1 did not specify, but it was roughly 4" diameter.

[@12aaron8829]

What model plasma cutter did you use?

[@hammersgarage]

It’s a small 40 amp unit from Eastwood. Thanks for watching!

[@dhaynes735]

What do you think a shop would charge to install this? I also have a 85 C15 gmc

[@hammersgarage]

Lot of variables there, but my guess at shop rates around my area would be a grand or more. Thanks for watching!

[@TheLimitedmod22]

Probably closer to $1,500 minimum....I would budget for $1,800 to $2,000

[@dereksimenac8844]

Have to crank the volume to try to hear you then your intro and tools are so loud they wake everyone in the house. Need a collar mic or just narrate over the video

[@hammersgarage]

Appreciate the feedback, thanks for watching!