SRT Chin Spoiler and Belly Pan Install on RT Challenger

[@mrfuriouser]

Working on a Challenger RT, The Cult playing in the background, nice clean garage, what a sweet day! You're one of the good ones, thanks for the info my friend.

[@BaBaBooeyWRLD]

Stone Temple Pilots too :)

[@Lowdownparatrooper]

Thanks for the video! on the way home tonight truck on the freeway in front of me lost or hit a tire in the road didn't have time to move much and it went under my driver's side front end. Pulled over to inspect the damage and saw missing parts, drove home and saw the real damage mostly cosmetic because of all the flex in the front end. But it cracked the Chin spoiler underside and I'm missing the drivers side brake duct entirely and some other plastic pins. Your vid will come in handy thank you

[@Colt_HoustonSouth]

Thanks for the part numbers, had a hard time explaining to the parts department at the dealership what I was looking to buy from them when I went to order the chin spoiler. The p/n for the belly pan will make them easier to deal with. Kinda wish I knew about this video before I attempted to change out the chin spoiler, definitely informative.

[@jtrude]

Thank you for this easy and clear video. Just bought the chin spoiler to replace my RT spoiler, looking forward to the new look.

[@roformance3241]

jtrude what year? I want to know if this spoiler fits on my '13

[@MattsMoparMadness]

Nice video. I have also recently bottomed my car out on a couple protruding fuel tank covers at a gas station and tore up my RT Belly pan. Looks like I can do the scat pack belly pan with brake ducts and chin spoiler on my car. Going to be ordering parts on Monday. Sure nice how a lot of parts can be interchanged with little to no modifications. I’m with you on the picky part of having a smashed up belly pan. Doesn’t sit well with me either lol.

[@animosqueparabellum2190]

Ive been wanting to do this to 2012 rt challenger for a long time now i feel confident thank to your video. Much appreciate. Oh and keep those videos coming

[@SchmitaEclipses]

Great video and music.

[@SpeedysGarage]

Glad you enjoyed it

[@kaileekg]

wish i had a garage like this! nice video man

[@Garage2Trail]

thanks Speedy for posting this! you are a HUGE help to me!

[@shawnsutter9748]

Again, I love your channel. Semper Fi.....

[@mitchfreeman9495]

Thanks Man!!! Really appreciate the walk through!

[@KedrKevin]

Wonder if the process is similar to putting a 392 Chin spoiler and belly pan w/ vents on a 11-14 R/T.

[@hamonmayes3782]

thank you. finally found a video for this

[@ethanprieto7979]

Do you know the part name or number for that plastic reinforcement at 4:07. I also have a 2009 r/t dodge challenger but I don’t have that piece.

[@ch-md4mq]

I recently purchased a 2010 SRT8. About a month ago my chin spoiler ripped off and was destroyed. It had no belly pan and a couple of the bumper tabs were damaged. I replaced the chin spoiler, added a new belly pan and repaired the bumper tabs with steel washers and gorilla glue. My son was driving it a few days ago and the spoiler came off again. I might add, both times were over 100mph. I noticed something different in your video. You have a black plastic bracket/support behind your chin spoiler seen at 4:08 in your video. My car doesn't have that. I found the part, but no diagram I've seen shows it. I cant find mounting instructions for it. Does it bolt to the radiator support? it looks like just 2 bolts on either side. Any info on this would really help. I think that piece would stop the chin spoiler from distorting at higher speeds. I had some paint overspray on my original chin spoiler. Someone may have hit a curb with it and lost that support piece. I have no clue.

[@SpeedysGarage]

It's been too long since I had that car but yes there is a support behind the chin spoiler. Hopefully someone with one of these cars can chime in to help.

[@grantnieman1406]

what is the part?

[@beckyleggett1295]

@ch-md4 I also have this issue. My support behind the chin spoiler was just sitting there not attached to anything. Did you have any luck figuring out how to attach it? Also do you know what this part is called or the part number?

[@Djmactech]

Great informative video with steps by step instructions. Just too bad you didnt have a helmet cam to free up both hands for a full view of each step. 9 out of 10 points bro. :)

[@frezze212]

Great video! Beautiful clean garage! BTW how did you lower your car? Springs? (Did you have to change the shocks) or did you use coil overs?

[@rogerrameriez8912]

Are your jackstands 2 ton or 3 ton?

[@SpeedysGarage]

2 Ton I believe.

[@davidreed3165]

Yes that really helped me too.

[@zackye5431]

Nice job .

[@HotZVP]

Thank you for this video. I need to take my front bumper off and I was just lost. This will help me alot, and since you replaced the chin spoiler, I am going to do that also since Ill have the bumper off... I doubt you will get this in time, but do I NEED the belly pan? Or can I just install the Chin cone?

[@SpeedysGarage]

+HotZVP It's been a while since I did this one, but I don't think the SRT chin spoiler will connect properly to the R/T belly pan.

[@SpeedysGarage]

+HotZVP It's been a while since I did this one, but I don't think the SRT chin spoiler will connect properly to the R/T belly pan.

[@SG-bb8pq]

@HotZVP I know this is old but was wondering if you ever got that SRT8 Chin spoiler on without that front belly pan(batwing)?

[@HannIFans]

not scary its good dude

[@87iroc]

God bless you

[@jaylee5843]

I been debating on this set up, but I wanted to get the 392 challenger part that goes on the vent of the bumper, the part goes under the airbox/cold air intake, anyone knows the name of the part? I saw it in a 2014 SRT8 392 Challenger, I just have no idea for the name of it.

[@cm581]

Bloodriver Moka did you end up getting the part name?

[@tpiercyIU]

I hit some animal with my challenger and broke my lower grill. is it possible to change the grill before you put the new spoiler and break air ducts back on without removing the whole bumper cover?

[@SpeedysGarage]

I honestly don't recall, but pulling the front bumper is like a 10 minute job. No biggie. Two bolts and a bunch of plastic rivets if memory serves.