SSD HD D60 CENTERED REAR AXLE FOR WRAITH / SMT10 / YETI

Closer look and install of SSD's new centered rear axle for Axial AR60 based rigs.
DESCRIPTION
Part No. SSD00179
HD D60 Centered Rear Axle for Wraith / SMT10 / Yeti
FEATURES
-Scale realistic design
-Injection molded
-Very durable nylon material
-One piece main housing
-Centered gear housing
-Hardened steel axle shafts
-Larger input pinion shaft bearings
-Removable diff cover
-Upper 4 link mount included
-Lower link/shock mounts included
-Same link mount locations as stock AR60 axle
-Also fits stock AR60 lower link mounts
-Compatible with Axial axle gears
-Same width as an AR60 rear axle
-Direct replacement for an AR60 rear axle
Direct fit onto Wraith, SMT10, Yeti and Bomber chassis
WHAT'S INCLUDED
-Main axle case
-2 * bearing holders
-Diff cover
-Upper 4 link mount
-2 x Lower link mounts
-2 * Axle shafts
-2 * 5 x 13 x 4mm bearings
HARDWARE
-10 * M2 x 6mm cap head
-4 * M2.5 x 8mm cap head
-7 * M3 x 6mm button head
-4 * M3 x 16mm cap head
-1 * M3 x 25mm button head
-1 * M3 x 14mm flat head
www.ssd-rc.com/hd-d60-centered...
Installation instructions
ssd-rc.com/downloads/SSD%20HD%...

[@Mr.Titanium1911]

Very hard to find these diffs today. Wish the SSD00059 and SSD00179 were readily available :(

[@rogerbeam3426]

As of 5/9/2021 I cannot find these any where , tried Ebay and so on ., bummed want too put them on the front & rear of my smt10 .

[@allthethings7226]

Discontinued 👎

[@clementinecrawlers2526]

what is the measurement on the width of that assembled ar60 centered diff?

[@acrandroid]

Thank you very much for sharing, it really helped me.

[@rogerbeam3426]

BUMMER they are dicontinued

[@akura2]

There's needs to be a front axle too!!!

[@XSRCdesign]

+Jimmy Louis I don't disagree! Hopefully this sells well and we will see one

[@Captain_Tool_Vicarious]

Please add links of shops that have these in stock! Can't find them anywhere! Thanks for the review!

[@XSRCdesign]

+Michael Sillaman rpp has them

[@carnivorouslee]

So what beef tubes would fit these?

[@mrcarrot714]

Do they have a front axle ?

[@matth510]

It dont work on the yeti

[@XSRCdesign]

+matt hall why do you say that?

[@matth510]

XSRCdesign because when I installed it the way the ssd instructions show. The rear tires spin backwards while the front tires go forward.. basically when they molded the housing. The made the ring gear on the wrong side

[@XSRCdesign]

matt hall you can swap the gear around in the front bulkhead then to get them to spin both in the same direction

[@matth510]

XSRCdesign no because the motor is spinning the entire drive line. Amd by flipping the front diff it will just make the vehicle go backwards...

[@XSRCdesign]

matt hall so reverse the motor rotation.