SSP18 Review - After 6 Months.

[@elicarr7981]

Novritch behind the camera like 🧔🏽🔫

[@filiumdei4121]

🙃

[@Headgasket-]

The emojis almost looks exactly like the guy reviewing the gun and it scares me

[@stitchmorales3658]

Lol 😂

[@robertvalentino7906]

Instablaster.

[@blackpeople6874]

🍑

[@roy-batty]

1:50 about the slide hanging half way... If you have an under-barrel attachment, make sure that it's not too tight. On my Umarex the plastic frame will bend and the slide will have difficulties sliding all the way. Solution: don't overtighten. If you have a laser and you have to overtighten, you'll have to do some plastic sanding inside of the pistol to give some headroom.

[@BRADLEYBREEN_]

I think I could see a tear when your old Glock didn't fire. Love the vid! Great in-depth review.

[@kamazenji9466]

I can feel his voice being super excited which i can understand. The gun is hot and definitely my very first sidearm. Good for a Christmas gift for myself from myself haha thanks for making this Novritch team!!!

[@ErgonomicChair]

6 months is virtually nothing for a pistol, all this is is a KJW-12 mixed with the KJW-13 just like how the SSP1 is the KP-05 mixed with the KP-08 and KP-06 grips. After 6 months the slide of this (for most people well before) will begin cracking because it's not real aluminum it isn' 6061/7075 it's just aluminum alloy, this crack will continually get worse and worse until the entire slide busts. Alternatively, that pot metal BBU in the slide is going to begin to crack at the front of it, and the disconnector will eat a massive groove out of it. Unless you were foolish enough to not get a steel disconnector, then, the disconnector will break pretty soon. This is one of the shittiest guns you are putting out, and that's a long list of overpriced guns. But this one is legitimately trash... I can't believe you would just... scam people. This is a scam, Josef. And you have to know that.

[@sea_muffin]

@@ErgonomicChairthis is a reply, not a comment

[@misky4487]

Underrated channel and underappreciated, great video as always!

[@WitchDoctor87]

I really want to see a package deal with this gun. The SSP1 having a package deal with some nice mods seems like the better option. If this could get some enhanced stuff for it for a package deal would really drive it home for me. I think an offer of a drum mag or extended mag would make this amazing. I'm new to airsoft and want a great primary handgun with really good accuracy and reliability. Another good add of course is the holster and mag pouches. Another cool thing would be a conversion kit.

[@smokezz9]

Good, honest review. Thanks Josef!

[@ErgonomicChair]

6 months is virtually nothing for a pistol, all this is is a KJW-12 mixed with the KJW-13 just like how the SSP1 is the KP-05 mixed with the KP-08 and KP-06 grips. After 6 months the slide of this (for most people well before) will begin cracking because it's not real aluminum it isn' 6061/7075 it's just aluminum alloy, this crack will continually get worse and worse until the entire slide busts. Alternatively, that pot metal BBU in the slide is going to begin to crack at the front of it, and the disconnector will eat a massive groove out of it. Unless you were foolish enough to not get a steel disconnector, then, the disconnector will break pretty soon. This is one of the shittiest guns you are putting out, and that's a long list of overpriced guns. But this one is legitimately trash... I can't believe you would just... scam people. This is a scam, Josef. And you have to know that.

[@submh0938]

@@ErgonomicChair While I have purchased an ssp1 and was very dissapointed with how fast it broke and will never buy noviritch ever again.... who hurt you?

[@ErgonomicChair]

@@submh0938 The many fuckin kids that bring me busted and shitty novritsch guns to fix, while they go on and on about how amazing their guns are. Despite them being broken.

[@pauls5630]

@@ErgonomicChair what would you recommend for a full auto pistol

[@ErgonomicChair]

@@pauls5630 That's super hard because all current on the market airsoft pistols are made with Zamak/Zinc Alloy, so the internals ARE going to yeet, the gun is going to absolutely destroy itself stock. But you can get a HiCapa with a steel disconnector and knocker and an airsoft masterpiece/edge Full Auto BBU which will last perfectly fine, but it's always full auto. For glock the only sensible option is a TM G18 because the aftermarket exists to replace the hammer housing and hammer with a steel or 7075 aluminium one! Again, Edge and Airsoft Masterpiece. The AAP apparently have some aftermarket full auto parts coming out in the future from Boom Arms and a few other aftermarket makers coming. But until then it won't be able to handle full auto for very long. It's just too much stress on pot metal to repeatedly hit something. No form of pot metal or zinc alloy has the tensile strength to actually withstand work exerted oni t that many times. Unlike steel, Alumnium has no fatigue limit, so every bit of work with an aluminium alloy piece wears it out every single stress no matter how heavy or light, it will wear on the part. Zinc is even weaker yet, and that's what 99% of airsoft guns are made with, zinc alloy typically Zamak Series 3 or 4. Some aluminiums like 6061 T6 or 7075 T6 are extremely durable though and can withstand the exertion for a VERY long time.

[@YamamotoKaruzo]

I love that rap flow.... ♪The slide is tight, the barrel is tight on the slide, the sears, you know, the lips are tight♪

[@Martinez53072]

The rail on glocks is proprietary, "glock accessory rail" Olight pistol lights come with an insert for both the glock rails and standard rails. Gen 5 glocks moved to the standard rail size.

[@mervinlouie5398]

holy shit i have the exact t shirt you are wearing

[@slabgizor1176]

"Totally unbiased review demonstrating the pros and the cons of the gun that I had a large part in designing. News flash, works perfectly with all pros and no cons. What a coincidence! Link to buy in the description."

[@GeoffDerksen]

Lmao like how does this dude review something like this after admitting he works for the guy? "Yeah it works perfectly!" Not going to bother watching this one.

[@dodgy_jammer281]

Looking at all the different glocks on the market and the custom ones down at my local shops, I don’t see how this is more expensive for a basic sidearm where the only thing different is you get a £9 bucking and a case for it to come in 😂

[@twistednutz130]

Great review! Got me wanting to get one now 😆. Hope all is well and keep doing what you love 🤙

[@kamazenji9466]

I will definitely buy this because Josef loves it... No need for more research soon as its available to ship here in the US i will get one for myself... Mine! Mine! Mine! Miiiiiinnnnneeee!!!!

[@ErgonomicChair]

6 months is virtually nothing for a pistol, all this is is a KJW-12 mixed with the KJW-13 just like how the SSP1 is the KP-05 mixed with the KP-08 and KP-06 grips. After 6 months the slide of this (for most people well before) will begin cracking because it's not real aluminum it isn' 6061/7075 it's just aluminum alloy, this crack will continually get worse and worse until the entire slide busts. Alternatively, that pot metal BBU in the slide is going to begin to crack at the front of it, and the disconnector will eat a massive groove out of it. Unless you were foolish enough to not get a steel disconnector, then, the disconnector will break pretty soon. This is one of the shittiest guns you are putting out, and that's a long list of overpriced guns. But this one is legitimately trash... I can't believe you would just... scam people. This is a scam, Josef. And you have to know that.

[@kamazenji9466]

@@ErgonomicChair calling Josef or the whhole Novritsch a scam is pretty unfair. Dude that long message on your comment basically represent all things in this world nothing lasts forever man. Move on! Any airsoft guns will eventually break and that add fun stuff to it that means you gotta repair it upgrade it clean it take care of it. That's all airsoft gun man. And for the price on this one you think its too much!? Well show us a full metal everything that cost less. I'd be happy to see. Maybe they exisit but go back to your own message let me know if it will never ever break. Thanks

[@ErgonomicChair]

@@kamazenji9466 It is what it is. They are taking stock products and selling them as "upgraded performance" guns, for more than their stock versions. Even look at the European prices, the SSG24 is 449 Euros! Okay. But it is also fucking $449 in the US. meaning people in Europe for NO REASON pay $80 US (equivalent) more for no reason, despite the fact Novrtisch claims (lies) that he "manufactures" his guns in Europe. And you're fuckin wrong in the first place. Airsoft Masterpiece build hicapas will never wear out, they will never break down if you install the parts correctly. They are made out of austenitic stainless steel, 7075, and 6061. They will outlast you, it would take SEVERAL owners to actually wear them out since they are built with the same materials that real guns are built with. ViperTech is a premium GBBR maker, ViperTechs are built with oil-treated steel. ViperTech GBBR's will literally never wear out. And I can easily show you a "full metal" Glock that will cost less. WE Glock 18. Bam. Cheaper, more aftermarket, more upgrades. Easier to build and they are more reliable than the KJW KP-12/13. The TM Glock's are more reliable than the KP-12/13. Novritsch's guns are extremely overpriced for what amounts to a stock gun with mixed matched OEM parts to make it look unique. For better and cheaper guns; SSP1 = KJW KP-05/KP-08 are made better nowadays with some steel FCG parts and TM spec hop-up. The SSP1 is out of date based on older parts. SSX23 = The STTI MK23 is $40 and the Hadron TDC is $15. That's it, that is literally the SSX23. You can get it for $55 instead of the $135 the SSX23 costs. Same damn thing. SSG10 = JG BAR-10 with a maple leaf bucking and some spiral fluting on the barrel. Novritsch actually fucked up on the QC and most the SSG10's leave factory broken. SSG24 = M24x, but the M24x is an Asian model meant for weaker springs... it's worse than the Modify USR150, which is typically cheaper and has steel sears etc. It's vastly better. SSP18 =KJW KP12/13 mixed together. This is one of the shittiest airsoft Glocks just barely better than the elite force crap. ZERO after market for these, because several parts are off TM spec. The WE Glock will be about $60-80 cheaper and you can buy a STEEL disconnector/delayer and a rollerbearing, and a 7075 or 6061 full auto BBU which is both lighter and stronger. You should probably buy a REAL aluminum slide, not an aluminum alloy slide like the SSP18 because it WILL BREAK. Buy a REAL 6061/7075 aluminum slide, or even a guarder steel slide. Novritsch guns are all universally out of date and old rebrands, or simply marked up licensed models he gets permission to sell. Then he cranks the price up[ and screws gullible and naive people who don't understand arisoft guns. The only reason you THINK that an airsoft gun shouldn't "last forever" is because you don't ever buy or research the actual GOOD airsoft guns. There are airsoft guns that will last you your entire airsoft "career" barring a freak accident. A TM 5.1 with a 120% spring will last you longer than the SSP1 for instance, eventually, you will just replace the worn-out FCG and back safety with Airsoft Masterpiece (CP/GSB/GSM) steel internals and fix it forever. Honestly, there are airsoft guns you can drop from 100 feet straight onto concrete, beat with lead pipes, and they will shoot straight after. (Vipertech, RA-Tech 7075 M4's, etc)

[@kamazenji9466]

@@ErgonomicChair huh! Thanks for that info! I'm pretty sure i won't get that from school haha i do research too maybe not as techy as you. (i get that) i gotta tell you I'm new at airsoft but i looked at WE brands too they are cheap but hard to het since I'm in the US its because of the branding legality wise blah blah but yeah WE is cheap but ordering it from Taiwan would still cost me same as SSP18 maybe more because of shipping. So that's where I'm at. Saying Novritch team is a scam? I dont think so just business thats where they are too. Haha atleast i can get an 18c less than $200 I'm happy

[@ErgonomicChair]

@@kamazenji9466 Yeah WE Glocks will get seized quite often unfortunately but htere are a few stores that get them in bulk down there. Gaston Glock are really aggressive with their trademarks, some stores like KY will sell no trades on their guns or use grease to cover them up. Crown Airsoft gets them to you guys down there though; www.crownairsoft.com/collections/we-pistols In general I am okay with the guns he sells even though they are massively marked up, but the fact he charges the European guys over there $80 US equivalent for no reason? Or that he says that his guns are pre-upgraded, that annoys me. He relies mostly on people who just don't have the time to learn tech'ing or examine the guns to buy based on his name.... Novritsch is sort of like Apple I guess, they aren't a "scam" but they definitely use scummy business tactics. And actually you'd be surprised! Taiwanese shipping is usually only about $10-15 for 2-4 day shipping on EMS Speed Post, which has begun shipping in the West Coast of the US. UPS prices from them arent' back either atm, but it is almost always cheaper to get guns shipped from Taiwan or Hong Kong than it is to ship guns within Canada or even across enough of the US when they are larger. But yeah check out Crown Airsoft, lots of WE glocks there, they have the G19 for $80 US. Remember that parts list! Slide, BBU, disconnector, roller bearing hammer. Fixed outer barrel comes with the slide. You will have a gucci glock and you can upgrade it over time as things wear out. Unfortunately the KJW KP-12/13 had too many proprietary parts that make it so you can't fully upgrade them easily. You often need to... change things, and that's really annoying.

[@vytas]

Josef, clean camera sensor ;)

[@twistednutz130]

Just bought a grey version! Thanks for the review!

[@thomashabig8260]

Danke für dein Review! Hast die grundlegenden Dinge auf den Punkt gebracht 👍

[@hammies4jayjay]

7:19 hehe :) sounds like something else

[@Brub0s]

N O

[@advancedcombatlegion8382]

Bigger button that makes different.

[@sc00bieskylin34]

With you there bro....

[@longsway91]

2:13 "the lips are tight"😏

[@rinehart.madeit8248]

@@longsway91 bru

[@mumufti]

Love your videos, keep it up, really interesting to see and informative

[@koruleigh978]

Random question, but what brand/model is that shirt you're wearing? Solid review btw, I've been mighty curious about this model on account of how the barrel is designed (The fact it doesn't tilt like a traditional Glock or browning style tilting barrel).

[@sogerc1]

This bodes well for my relatively new KJW KP-13F.

[@ZeroDK555]

Does other brands of Glock magazines fit the SSP18? Also, Please make a 50 round CO2 magazine for both The SSP18 og SSP1 :D

[@123456kiste]

the basic is a KJW KP13F wich is a clone from the Marui G18C so yea, you can put KJW, TM and WE mags into it

[@ericknajera8219]

Thanks I need that info

[@asbestosconsumer667]

Every airsoft gbb glock mag fits in this pistol

[@kazumafeather8901]

For whatever reason this inspired me to upgrade my KP13

[@dpchief_216]

Like the Review Josef! A little off topic, but with winter coming around the corner, can you do a video on using Propylene in pistols and gbbrs? (Mapp gas for those who don't know) I can't find any reliable info on the internet thus far.

[@SIr_Nevermore]

Thank for the Review

[@gamadiaz405]

Great review i appreciate will be buying for sure

[@rarevidz]

"FLESHLITE MODIFICATION TO ATTACH!!!!???"

[@SWERVE0179]

I was walking across my room and stopped dead in my tracks when I heard that 😂

[@lennimikuszewski]

1:56 my WE g19 has the same problem xD (btw. and it isn't thight fit)

[@blackwingmaster141]

Most glock-ish replicas have that issue. Replacing regular hammer roller with ball bearing one, and proper lubing of slide eliminates issue

[@lennimikuszewski]

@@blackwingmaster141 I accualy know, just told it because Josef said that it's because of the thight fit

[@ErgonomicChair]

That's not tight, you can hear it rattle. I fyou want to know what an ACTUAL tight tolerance is like, but an Airsoft Masterpiece slide and frame. That's just poor quality control because the KJW KP-12/13 is poorly designed.

[@ErgonomicChair]

Also it's not the fitment it's loose tolerances that cause this issue. The guide rod is dropping down and by hitting it in forward you are forcing it to push into place.

[@willowrabbit]

Pick up the Bomber 8mm hammer wheel from boomarms, will fix it : D

[@jylbo]

Nice review J053F!

[@ryanorion44]

Really nice overview. But dang I kept wiping my screen because I thought I had a water spot on the top right haha. Clean that camera lens ;)

[@JosefMucha100]

it was on the sensor. Done. ;)

[@ryanorion44]

Josef Mucha I noticed after a couple videos it wasn’t on MY phone. Glad you caught it ;) - just got my SSP18 in. Really like it so far. The stable barrel is really nice for attachments- really appreciate that touch. Any chance there will be a grip slip to go over the handle like the hogues? Can’t wait for more accessories and of course more magazines. Any chance you can confirm if the KJW KP13 magazines are compatible?

[@thefallenferret]

"I did some weird stuff with it. Like, seriously." He fucked the gun.

[@Bulletoc]

"Review"... you can't ethically review your own business products.

[@leomakosiej1677]

Josef can you please tell me if it is compatible with a suppressor

[@jamo_pls]

it is. It has threads

[@stigmau5]

Great video Josef :)

[@Olson323]

can you fit fab defense stocks for glocks into ssp18? is the slot inside grip behind magazine same size as in glock 17 ? How does it works with magazines from other brands, like WE ?

[@CptWildBill1]

I just got my SSP 18 in and want to know what holster you use for the flashlight?

[@floriangramsch9036]

This slide problem is normal for all Glocks also if they are getting older

[@Nater2204]

I've used 3 different ssp-18 pistols. All of them were great. Like a .28 can go 60+ feet easy.

[@simonjockel192]

do you use co2 or gas?

[@Nater2204]

@@simonjockel192 co2 all the way. Requires more regular maintenance and is a bit harder on the gun but is significantly more consistent in colder conditions. I've never had a green gas pistol go through a full mag without slowing down.

[@simonjockel192]

@@Nater2204 Nice thanks for the quick reply, now i only have to wait for the german version to restock ;D

[@Nater2204]

@@simonjockel192 just remember to maintain it consistently.

[@Nater2204]

@@simonjockel192 OH! Do you have any social media?

[@Starfleet8555]

I just ordered the black version of this. Great review, thanks. I did a little bit of research before I purchased it. I use C02, and the heaviest BB I got is .25 gram BBs. I use the lighter BBs. But I'll try getting a pack of 32s to see how performs with it in comparison to the 25s. I was curious if it has an orange cap on the end of it? because I would like to have that on it.

[@floatingbritton2150]

yeah there is you just unscrew the black tip

[@_O497]

Are the .25 bbs good on it?

[@Starfleet8555]

@@_O497 They are the heaviest bb I got so, I'll just have to work with it. I still haven't come around to buy heavier bbs.

[@Starfleet8555]

@@floatingbritton2150 okay cool, thx.

[@_O497]

@@Starfleet8555 OK, but are the 25s manageable?

[@andreistoica8142]

Can't wait to use it with an m4 adaptor and hpa!!! :)) love you milsim dudes!!:)))

[@christophergregory2839]

Hey Joseph, is there any chance that you will make both the SSX303 and the stealth pistol compatible with how and other drum mags

[@MKAnr1]

Pistol holster that can be used with a flashlight mounted on it?????

[@acstories7176]

I understand this was two years ago but how would I remove the orange tip after shipping? I have plans to buy one

[@benefit7909]

Do you think as a sidearm pistol this weapon is better then the tokyo marui 5.1 ggb ? Out of the box.

[@spacemarin04]

That light problem must only be with that airsoft gun. I know there's not issues mounting lights on real glocks.

[@pamposcharalampous3084]

Am willing to buy this replica in the next days and i want to know if i can install more brands of magazines like WE tech. I have an older replica the glock18 and i have a lot of gas magazines that i use on it can i use them as well to the ssp18?

[@michaelangelolim3739]

Is this compatible with “WE glock 18 magazine”???

[@djshyproductions]

wish they shipped to NY/NJ... :(

[@henrymason5558]

him: it came out today. :me: HOW THE HELL HAS IT BEEN 6 MONTHS IN 1 DAY

[@eldementecentrino]

TLR has adapters for that, no need to carve away.

[@hamadalsuwaidi5305]

I have a question... Can the SSP18 take a unarex glock mag?

[@viktorriha7649]

Its a kjw kp13f with a novritsch name. So go from there

[@danyplays8521]

Can a regular extended elite force glock 18c fit in this pistol?

[@aaronjackson2780]

Yes

[@reeeeeeeeeeee9471]

you are inspiration for you i wish to be like you

[@Airsoft_Charlie]

13:30 The co2 mag that came with my ssp18 works perfect, but when I bougt 3 more co2 mags some months later they dit not work because of the wobble.

[@GhostShadowSniper]

Helló. The SSX23 supresszor compatible the SSP18?

[@KasparGoodes]

Yee

[@anothrnoml]

as long as it has the correct thread, ig

[@stepbro2119]

How about 12 months

[@floriangramsch9036]

Nice vid, do the we mags fit?

[@floriangramsch9036]

FJJ WFP ok thanks but I actually meant to ask if WE mags fit in it , that’s because I have still some at home

[@Oneiromancy]

@@floriangramsch9036 Yes, they are all the same as the last comment already said "they are all Tokyo marui compatible"

[@leomakosiej1677]

what do you reccomend for a primary while running the ssp18. if someone can help me i prefer gas. c02 isnt allowed near me and i cant do electric

[@donkeydefense]

Honestly price wise it’s not bad. The elite force glocks are like 150 bucks and they suuuuuck

[@TheBasicJumper]

Is there a good holster for the SSP18 with flashlight and aimpoint? Cant find one -.-

[@nigelfarrugia8303]

Guessing glock 17 mags fit in it or no ? @Josef Mucha ?

[@japyoo2248]

Was this really used by the ss?

[@The_Scilencer]

What color what’s that pistol you reviewed?

[@top-lul7540]

I know what u mean becouse i had that whit my ssp5 tho the slide move half back i think i need tho lube that but after 1 or 2 maggs it slided great

[@matthewacosta6430]

Is the hop up bucking supposed to get chewed up a little

[@whitmills6691]

It’s a stock KJW man I don’t know how y’all keep passing these off as your own unique design

[@JosefMucha100]

play with whatever pistol you prefer.

[@whitmills6691]

Josef Mucha I mean don’t get me wrong I’m sure it’s not bad (though full auto usage will probably break it quick) and it’s not even that overpriced! I just don’t like that y’all take other’s products and try to pass them off as a unique in house design

[@123456kiste]

@@whitmills6691 yea you are right and thats what pisses me realy of when I hear novridge and crew ist anouncing a "new" product fuck off, its just an already released airsoftgun with little modifications they didnt even invented

[@MsPeep]

Is this gun completely made out of metal?

[@jamo_pls]

no, polymer frame, metal slide. like a real glock

[@MsPeep]

@@jamo_pls cool

[@shadowplay2002]

thanks nice vid

[@ghost_nld2]

am i the only one wondering which shirt he got there? does somebody have a linkj to that combat shirt?

[@Louis-xm4tu]

Dose the c02 break the muzel under 10C because the ssp1 dose

[@KuSQ3N]

Is there any fix for left handed plp with the mag realese?

[@janikgobeli3863]

Do you no clean the ssp18 with silicon sometimes?

[@vintageguitarz1]

Funny, BUT I've NEVER had that slide hangup on any of my WE TECH Dinosaur series Hi-capa's (I have Six, 5.1, 4.3, 3.8) and those are just as tight as your Novrrichy made in China GBBPs!

[@mikahdogg5055]

What flashlight did you have on the ssp18

[@fastairsoft1797]

Thank you so much for the review! I was at the website and ready to buy it, then I saw your review which made me not wanted to get it any more. "it is what it is"

[@connormccabe1445]

Why? Lol

[@jacksonmeadows6533]

Yo chill

[@ggboyscz5617]

Ahoj Josefe je nejlepší pro SSP 18 green gas?

[@Curlocker30]

When is it going back in stock

[@alstoncanta154]

yo josef can i buy the ssp18 that you are holding that you said was new

[@MKAnr1]

Do the flashlights fit in the norvitch holster?

[@premiermartialarts1067]

Thank you

[@haosheng12]

Can you powerstroke the SSP18? Basically pull back on the slide and release it from the slide stop when you have a full mag inserted.

[@haosheng12]

@@midwestairtech the SSP1 does not powerstroke which is why I asked

[@RazzJT]

@@haosheng12 If the real Glock does, this probably does too

[@H.W.R.D.717]

Would this be compatible with the flux brace?

[@OniFearr]

Will it fit in the holster with a tracer unit?

[@deadsh0tpresents452]

what gas shud I use green gas or black?

[@tecnosplayer4361]

How much bb can Fire with a mag of co2 and a mag of green gas?

[@malenskii2641]

7:20 😳😳

[@MurderCrowAwdio]

Mine didn't come with valve key :(

[@rafaelsimoes4923]

Make a vídeo of ssp18 , a stress fire .. and mag damp fire.

[@veloaddict]

@2:14 "the lips are tight" that's what she said

[@leowalter5835]

Cool Video

[@jonathansanchez9066]

When using hi cap co2 mags with the SSP18 can 1 co2 cartidge fire and empty out 1 hi cap mag?

[@elijahmauck5300]

You can’t use hicapa mags with the SSP18. Two totally different types of pistols

[@2020_Visi0n]

Is it compatible with a Roni carbine kit?

[@theplayers6460]

So like I wanna buy one but it's not available anybody selling his to Germany in the full auto variant

[@megagamerA]

Im not sure but i heard the mag likes to fall out

[@glazpeekedjfk9039]

All dislikes are from the ssp1 users xD

[@daviddoherty3199]

TM spec glock mags?

[@headownMH]

kjw

[@dorinmihai2342]

Any GBBR Ar15 or any platform in project with NOVRITSCH?

[@banjosforbreakfast6086]

These pistols are heavy, and feel well-made. However, the BB feeder at the top of the magazine is made of cheap plastic. If you accidentally drop the magazine, it’s heavy enough to easily snap the brittle plastic feeder off. A new plastic part is five dollars plus $9.50 shipping in the US. Novrtisch will not replace the junk piece under warranty. 👎👎👎👎

[@5cmpersec]

Are the hammer sears pot metal or steel? This has always been an issue with WE produced Glocks where the sears goes full auto after a while.

[@ErgonomicChair]

It's all pot metal. This is nothing, NOTHING, but a rebrand of KJW's KP-12 and KP-13 mixed together. It's... worse than TM or WE Glocks even and that's saying a lot. The sear is going to wear out even faster than WE and TM. AVOID. Stick to your WE with steel guns modify parts.

[@5cmpersec]

Interesting, you already had access to one?

[@ErgonomicChair]

@@5cmpersec Every single Novritsch gun is a rebrand of another company. He makes ZERO new guns on his own, nothing Novritsch has is made by himself. SSP1 = KJW KP-05 with KP-06 grips KP-08 slide SSG10 = JG Bar 10 (literally) with a fluted barrel and maple leaf bucking. SSG24 = Modify M24x Asia model with a harder spring and a fluted barrel SSX23 = STTI MK23... yeah, the $40 MK23, that's all it is with a preinstalled $15 Hadron TDC. That's it. This gun is the KP-12 mixed with the KP-13. KJW rebrand just like the SSP1.

[@5cmpersec]

ErgonomicChair I wouldn’t call it a rebrand as I’m pretty sure at least the grip, outer barrel and slide are tooled specific for this model. I don’t recall kp12 and kp13 uses the fixed outer barrel design either. All Novritsch guns are obviously based on existing airsoft platforms and OEMed by established airsoft manufactures but his products at least during launch are quite different from the originals. I was not impressed by my friend’s ssp1 when I tried it but I had good experience with his sniper platforms. SSG24 took the original modify M24 and changed a lot of parts and design. Modify later incorporated most of the changes internally and made the modify M24 USR 150. SSG10 is OEMed by JG but parts commonality between it and JG Bar 10 is quite low. The entire trigger unit, hop chamber design, receiver, cylinder material and spec, bolt handle spec and few others are very different. I’m not familiar with the ssx23 so I can’t comment. I’ll test out the SSP18 when I get my hands on it.

[@ErgonomicChair]

@@5cmpersec No, the grips are of for the KP-05 Accelerator, and the outer barrel is the OEM stock with fluting machined into it. The SSP1 is the KP-05 with a cosmetics kit and dyed nozzles (purple instead of red). What's worse is that the SSP1 is based off the IPSC model of the KP-05, aka the old one, the out of date one with a non TM compatible hop up which isn't as good as the new TM spec KJW hop up. The KP-12 and KP-13 don't have a fixed outer barrel, but it's not a hard modification. They're likely just milling the outer barrel flat vs curved at the factory for them, all they have to do (KJW) is remove the tilting angle on it. It's OEM other than that, because the only fixed outer barrels are from Gunsmith Bros or Detonator, or DP. Each of those are $80-120 with the slide included and I know for a fact Gunsmith Bros despite Novritsch on a personal level and would refuse to work with him despite the fact GSB works with tons of creators and personalities (like KnucklesGSM and his full auto BBU for Hicapas). The SSP1 is a massive disappointment, but yes the SSG24 are pretty good. But the SSG24 didn't change anything or design... it's 1:1 with a couple edits around the sears which is a common at home mod most people do on the M24 themselves. Takes about 4 minutes... it's... nothing. massive but it is nice and makes for a nice crisp trigger. But the M24 is definitely a good gun, it's just your friend paid about $150 too much for the M24x and the M24 USR150 which is vastly superior to the SSG24 (has ACTUAL steel parts inside of it and ACTUAL upgrades) is typically $50 cheaper than the SSG24 despite being outright superior... in every way shape and form. So while the SSG24 performs well, it is overpriced and out of date just like the SSP1. The SSP1 works fine too, just not as good as the current KP-05. I've worked on 3 SSG10s already, fixing bolt and cylinder wobble issues, re-polishing the inside of the cylinders (screws and burs scraped the shit out of the inside), and one came with a snapped stock which he had to ship back to Nov. The SSG10 shares... a lot of parts with the JG BAR-10, and the parts it has put into it (Maple Leaf autobott, now being dropped for the shitty Prometheus black both inferior to the PDI W-Hold) the trigger unit is the same as new JG BAR-10's, the receiver is... the same with aesthetic changes. The materials are LITERALLY OEM the exact same white metal, the bolt handle is again just aesthetically changed. It's all the exact same material and if you want I can show you videos of discord of some of the issues I've had to deal with with awful QC, wobbling internals, scratched internals, etc.

[@sandman_sam]

Anyone know what shirt that is?