14-21 Toyota 4Runner Warn Semi-Hidden Winch Mount Bumper Install

[@lostagain2992]

OMG! I just installed my Warn semi hidden bumper. It was the hardest accessory install yet! I couldn’t have done it without this vid! However…. all of the factory bolts reinstalled perfectly. But one of the Warn slots didn’t match up and I had to use a 1/16” smaller bolt. Otherwise solid install and love it!!!

[@lostagain2992]

You did a great job on the video and install!!!! Greatly appreciated!!!!

[@charlestaylor8832]

Nice job showing the one man install. By the way those a machine bolts or sometimes called machine screws. A lag bolt is actually a wood screw with a hex head. Sorry to be so technical, just one of my pet peeves.

[@NoahStage3]

Thanks! Yeah, I knew someone would call that out haha. My mind was thinking machine bolt, but my mouth said lag bolt and I was far beyond the point of being able to re-shoot by the time I realized.

[@charlestaylor8832]

Sorry to be that guy. I understand how that is when speaking. I give technical presentations and sometimes think “what did I just say “. Again great work. Stage 3 is one of my favorite suppliers.

[@NoahStage3]

@@charlestaylor8832 No worries! I can appreciate a kind correction with good intentions. It's the folks that are rude or angry when they try to correct me that I take issue with haha.

[@foihdzas]

Excellent resource. Clear and concise. Now just to figure out why every after market bumper manufacturer says these cant be installed on a limited .... Any insights youtube? Possibly the parking sensor? I don't have the fance radar cruise control..

[@NoahStage3]

Thank you, I'm glad you liked it! I think the parking sensors and the unique bumper design for the Limited are what stops companies from confirming fitment. I'm pretty sure the brackets and hardware behind the bumper are the same so you could probably get an aftermarket bumper to bolt on to the truck, BUT there's no telling how much plastic you'd have to cut and modify to get the Limited bumper to fit around it.

[@scooty67]

I hope I can find one like this for my 2022 Tundra, love the look and would serve my purpose perfectly while keeping the aesthetics.

[@002kp]

Will this work on an ‘18 TRD Pro?

[@CelticSemperTyrannis]

Would this work on a 2023 4Runner with TSS?

[@dreddy_g]

15:50 What kind of wheels are those? Thank you for this guide!

[@robrozek9265]

Will this set up work with the radar cruse control

[@stage3motorsports]

According to Warn this version will work with adaptive cruise control as long as you don't have lights on top of the bumper like we do, but we haven't tested it ourselves.

[@robrozek9265]

Thank you

[@timo1642]

Great video. What kind of lights are those mounted outside of the grill and how did you mount them ? Thanks

[@NoahStage3]

Thank you! The lights I have on there are 6" KC SlimLites. I had to make two small metal brackets to support the lights from behind the factory bumper since it's all plastic. Basically just small metal bars with holes for the KC hardware to bolt through and sandwich the plastic between the lower mount of the lights.

[@Cubulation]

@@NoahStage3 You should make a quick video about that if you haven't, I'm really interested in putting round lights in the grille but theres like NO resources online of anyone who has done anything similar and I'm at a dead end

[@96kylar]

That looks bad ass, and exactly what id want.

[@allenhoyt8016]

Did you have to do anything with your suspension? Assuming you still have the Bilstein 5100's installed.

[@NoahStage3]

Good question. I actually swapped to a Falcon Sport suspension kit when I did this install and I set the front at it's max 2" to accommodate for the extra 163lbs of weight. With that setup the front was able to settle back down to about 1.75" of lift so the stance remained the same as what I had with the Bilstein kit and the ride quality is still excellent.

[@allenhoyt8016]

Thanks for getting back to me on this!

[@garyschrader8633]

I added a warn mount bumper two years ago. Now I would to do a viper cut for larger tires. Can a c4 or other companies extensions be used with the warn bumper

[@thorhang566]

Why don't you guys notch out the brackets where it contacts the sway bar? That is a dealbreaker for me. I like the simplistic design of the bumper and winch mount, but those brackets being in close proximity to the sway bar is a nogo for me.

[@andynonymous2164]

Watched the whole thing just to learn how to wire it. Oopsie. Wrong video !

[@lifeofky4037]

Will this work with a 2010 that has been facelifted?

[@andynonymous2164]

How hard will it be to get the cut right on an SR5 bumper without the template to trace? And thanks.

[@lostagain2992]

Did you reinstall the lights on your previous mount or did you drill holes into the bumper?

[@96kylar]

What lights are you talking about? No light was moved whatsoever.

[@lostagain2992]

@@96kylar The “Daylighters” with the yellow covers in the thumbnail pic.

[@well69]

Will this work with a 2020 limited?

[@kennymccann1651]

Approximately how much time, start to finish on the bumper/winch install?

[@NoahStage3]

It's hard for me to say exactly since I was filming a video as I installed it, but you should be able to knock it out within a Saturday. Count on at least 5 hours or more to get it all buttoned up.

[@kennymccann1651]

@@NoahStage3 Thank You!

[@Joshrwms87]

sliiiiiiiiiick!!

[@NoahStage3]

Thanks man!