Stage6 Torque Control Clutch Tuning is so EASY

This Stage6 clutch is so easy to tune. You don't even have to remove it from the bike to change springs, or add weights. It comes with white and orange springs but I bought stronger red ones! I'll tune them in after this video and report back!
I picked up a Stage6 Clutch and Bell for my Derbi Start 5. The stock clutch was giving me issues with surging and chatter. This one is really nice and fully adjustable.
Feeling generous? Buy me a coffee to help support my videos.
www.buymeacoff...
36mm Socket - amzn.to/3eCLEWg
Stage6 Torque Control Clutch - tinyurl.com/2z...
Stage6 Bell - tinyurl.com/2e...
#stage6 #derbi #cornped
My Gear Links
Main Camera amzn.to/3qw1Cnt
Main Lens amzn.to/3qsSOPf
Wide Lens amzn.to/3pwmOdQ
Portrait lens amzn.to/32ooNbv
Mic amzn.to/3HgkBch
Light amzn.to/3qw2SXJ
360 Camera amzn.to/3euCkjV
Selfie stick amzn.to/3pxJGJK

[@motzingg]

This is the coolest scooter clutch I've ever seen, thanks for showing it

[@Corn-ped]

It makes tuning on the fly so easy. The spring preload screws are awesome for fine tuning.

[@pepsi.kola69]

can you install it without the big spring holder🤦‍♂️ i didnt get that with mine i bought it used

[@Corn-ped]

Yeah just make sure it's not binding

[@pepsi.kola69]

@@Corn-pedthank you man, i love you❤️ saved me

[@Corn-ped]

Yeah! Go get it!

[@leepinkerton6854]

WHEN IS THE SPOOKY VIDEO SERIES COMING OUT

[@Corn-ped]

I have been looking for a smoke machine at goodwill for a while now.

[@craigdawson3450]

Does this clutch fit a aerox 100 they use the minarelli 100 cc engine

[@KstephanK]

Does this clutch fit on a Puch E50 Motor?

[@Corn-ped]

No, it will not. This works on Minarelli scooters and Derbi Start 3 & 5 engines

[@jimmybinet1751]

Hi! Necesito un embrague de esos para axis 90

[@dinisvlasov3793]

Will this fit on a honda bali 50 scooter?

[@Corn-ped]

I am not sure about that.

[@joshuaharrison9331]

I seriously don't get why anyone would want to take off in their powerband. On my 130cc 2T that would be an uncontrollable amount of power & make is so hard to maneuver in traffic. I prefer a low rpm grabbing clutch, very light sliders and a very weak contra spring to match.

[@Corn-ped]

Yeah on a 130cc 2t, that would be a lot of power. On a smaller tuned 50cc you might need to use the launch to get going. Or maybe you. Just want to do wheelies.

[@user-bf2mv1cb8s]

What do the weights do on the clutch shoe, adjust engagement? You didnt explain. Thanks​@@Corn-ped

[@Corn-ped]

@@user-bf2mv1cb8s they make the pads engage harder and slip less. If you were to put the stiffest springs in and really tighten them down it would engage super high rpm and slip a lot. It might just slip and burn up the clutch, so in that case you would want heavier shoes.