Staged header pipe versus straight pipe / Predator 212

[@miguelpagansr6128]

Another fun and educational video, it’s like you’re the mad scientist of minibikes. Hope you can keep them coming, ride safe out there. Thanks.

[@Black66]

Thanks ! I have more mad scientist stuff coming.

[@miguelpagansr6128]

@@Black66 I appreciate you for what you do my brother. And I remember a video you posted recently on sprockets combos, there was one that caught my attention a 18 tooth sprocket on the clutch and a 60 tooth on the rear sprocket. Would that combo work on a stock Honda gx160 set up? My plan is to leave it all stock including the governor for reliability purposes I like my race bikes but I just want to cruise now a days I had enough of speed, I’ve had a back injury and both legs broken because of it. Now I just want to go slow and enjoy the scenery.

[@Black66]

@@miguelpagansr6128Thanks! I hear ya. That combo will work. It won't be super quick because it's a higher gear ratio. If you just want to cruise. a lower tooth count clutch might be better. It would have more low end.

[@lordion33]

You the best minibike content producer on YT. Thx man. Keep up the great work. Im following your 224cc build. Gonna steal a few of your mods

[@Black66]

Thanks! I'm glad you like the content. I have some more stuff I'm gonna do to the 224 in upcoming videos.

[@wetpuet]

You should have tested the staged pipe vs. straight- both no muffler . This test just proves mufflers are restrictive . Thanks for the vids btw 🤘

[@Black66]

Thanks! I have a video coming out on that topic with the Mega Moto 80

[@calvinhobbs89]

Mufflers, silencer, ad back compression that helps with torque so it depends on the application but that always the case lol , great information thank you for your time an content

[@tashatorrid]

I was scrolling through the wasteland of KZbin today wondering why you hadn't put something out. An hour later, here you are.

[@Black66]

I always have to show up with something😃

[@billdozer8845]

That’s a quick little bike! Thanks for the quality content!

[@Black66]

Thanks!

[@davidpayne4084]

I wonder what this man sock drawer looks like 😂😂

[@tashatorrid]

😄

[@SpACeCruizeR2o3]

that stage pipe better make more cuz thats the one i have

[@RYANINBODEN1547]

take off speed, cruising speed, and top speed i feel like should all be considered. maybe it affects the 2 stroke bicycles more then 4 stroke 212's but i would think the one with the muffler would have slower take off speed but more top speed.

[@sandmanyaggy822]

Need to get you some sun f street tires, my man. It will make your street cruise way may enjoyable!

[@andrewbrown3123]

What are your engine modifications? Your carb and your filter and all the other stuff you might have

[@Black66]

Check out the cc100x playlist for all the engine combos and parts swaps on this bike. kzbin.info/www/bejne/r2TTnWqBnriHo7s

[@andrewbrown3123]

@@Black66 thank you

[@mklein5179]

Another great test video !!

[@Black66]

Thank you!

[@whiteboysteve4474]

Awesome channel

[@Black66]

Thanks!

[@andrewkuhtz]

Do you happen to have a part number for the stepped header pipe? Love your videos. Keep it up!!

[@Black66]

Thanks! appreciate that! Yes here is the link for the staged pipe www.ebay.com/itm/193709332828

[@andrewkuhtz]

Thanks!

[@cravenmoorehead5636]

Check out Robertson tourque tubes. They are the best.

[@brdllc]

@@cravenmoorehead5636just looked him up. Wish I would’ve seen this earlier haha. Just ordered a different regular pipe for my ct200uex. Oh well I’ll still try a torque tube. I couldn’t find a staged pipe to fit my bike, until now

[@pechuga302]

I have a predator 224 with torque converter on a Manco go kart. I can't get it past 21. What should I do?

[@Black66]

Maybe remove the governor

[@hunterhoover6558]

I need to know what your carb settings are on that if it has the 22mm mikuni like the a/f ratio set screw, i was just wondering if i screwed it in all the way but not super tight just bavk to where it stops how manys twists back out till i get that right setting like this mini bike in the video

[@predator_boiz336]

I like the sound of a staged pipe way better, had more of a low end growl, my stand trumpet is just soo high pitch I feel like

[@alexanderpapii4866]

Where did you buy your trumpet?

[@deathtrapperformanceminibi260]

Cool stuff!

[@thecatapillerwillgether1993]

What app are you using to time these runs

[@Black66]

I use digiHUD along with the camera GPS for top speed and a Dragy performance meter for 0 to 30

[@turbocoupe9212]

What pipe is the staged pipe, I can’t find it on eBay, is it the one omb sells?

[@rekless1471]

If I upgrade my carb to a makuni and straight pipe it will I have to switch the rod out ?

[@Trains_n_stuff08]

It made me think, why were you shocked that the pipe was hot, because mines gets hot real quick

[@Black66]

I was kind of joking when I said that.That was the point, I knew it was hot...

[@Trains_n_stuff08]

@@Black66 oh ok😅

[@StreetOutlaws-w8s]

Link for the exhayst???

[@SpACeCruizeR2o3]

Just a ClassicaL BeaSt!!!!!

[@Black66]

Yes, it is a beast!

[@SpACeCruizeR2o3]

@@Black66 thats the one with the blue weld near where u screw it in at right i have the same one for my ducar brand new just waiting

[@Black66]

@@SpACeCruizeR2o3 Sweet! Nice sound

[@SpACeCruizeR2o3]

@@Black66 so the motovox frame i have i just found out is a very wanted frame some dude just offered me 8hundo i turned it down dumb because with 800 i could get the bigger mega moto frame from gopowersports for 600 and then put the ducar on it but do i really want a bigger bike ? what would u of done

[@Black66]

@@SpACeCruizeR2o3 I would keep the small one and make a hot rod bike . I like the quickness of the little bike .

[@DeathtrapCult]

is this AZ or NV?

[@Black66]

AZ

[@Thablue212]

What do u have in the engine

[@Black66]

Check out the playlist. I have had many engine and part combos on this bike. Over 350 videos on the channel so far! 👍 Check them out! kzbin.info/www/bejne/jXeoh6KZlMahbrs

[@chupapi9449]

Does this predator 212 pipe fit in the normal engine of this same Coleman mini bike ??

[@420edu3]

Yes

[@420edu3]

Yes

[@mikethesoundgoat3392]

Would you ever sell your go kart? If so how much?

[@Black66]

Ya, I might sell it at some point. I'm not sure how much. I guess it would depend on what engine I have on it when I sell it.

[@demarcoedwards1102]

I have a Azusa mini bike could you tell me what tooth size is good for trying to go 60mph

[@Black66]

I went 60 with the five inch tires with both the 60 tooth and the 72 rear sprocket . I used a 17 and an 18 tooth clutch

[@pbedrook]

@@Black66 which sprocket faster? 60 or 72. Im currently running 72t n go like 60 would i be faster with 60t

[@Black66]

@@pbedrook Generally that's what would happen. A 60 tooth will give you more top end but slow you down a little taking off. As long as the engine has enough torque to pull the gear . Rider weight and tire height play a role in it too.

[@pbedrook]

@@Black66 Aite i might try it and see how it trun out . Wat would be some else i could do for more torque

[@mgwashing]

@@pbedrook yes

[@erwinbarksdale7846]

But why do they do these tests with upgrade carburetors I want to stay out the box stock regular carburetor with Max torque

[@Black66]

The reason I use this carburetor is that it will support future modifications better. Nothing wrong with the stock carb.

[@Black66]

Check out my other videos on the CC200U . I’m using the stock carb .

[@yawningdog9894]

Why do you just leave the valve breather hole to the open air where dirt could get in you engine 🙄

[@Black66]

Check out the playlist on the channel to see what happened !

[@sandmhoder]

is it proper to run your engine with clutch facing outwards or ghetto

[@Black66]

Yes, you can run then either way

[@OldNoNameJoe]

@@Black66 shouldve never answered that dumb ass question

[@SpACeCruizeR2o3]

on that note can u say BeasT 10x fast lol

[@Black66]

Yes!

[@Black66]

Lol

[@SpACeCruizeR2o3]

@@Black66 lol thats a ripper

[@albertpeterson7134]

Don't Burn Yourself 😳😳

[@Black66]

LOL that thing was hot for some reason!

[@hezues]

Will it burn the valves to have an open exhaust without a muffler?