Stanadyne DE injection pump replacement on a Deere 4045 engine 550H dozer w/help

We walk you through on how to remove and install a Stanadyne DE injection pump on a Deere 4045 engine. Will be very similar to the 6068 of the same era. Definitely go check out ‪@AreaDieselService‬ for all your Diesel needs.
Here is a link to there video of rebuilding this unit!
• DE Pump Rebuild 4 Cyli...
Check out our friends at Area Diesel Service and mention us for free shipping
www.areadiesel...
Tool giveaway video! Watch it to win! until June of 2024
• Giving back to you! Hu...
C&C Equipment stickers and merchandise can be found here
ccsurplus.ecwi...
Thanks for watching
Facebook
/ candcequipment
Instagram
/ ccequipment
Tiktok
/ c_cequipment
Website
www.ccsurplus....
Email
[e-mail]
Check out our friends at Area Diesel Service and mention us for free shipping
www.areadiesel...

[@AreaDieselService]

Excellent Video! Thanks to all the C&C fans that have been visiting our channel! We appreciate ya'll!

[@C_CEQUIPMENT]

Thank you guys for helping us out!

[@robertsharp8804]

I really enjoy watching your programs. They are very beneficial. I was a diesel mechanic in the military and the gas engine mechanic as well but I haven’t done any of that in years. I driving a Ford pick up with the old international engine diesel. Since I’ve been hurt, I can’t do much work on anything anymore in the army report on cats in the Detroit mostly when I was in anyway, but at any point I am really grateful that you video your shows one day I would like to buy one of your vehicles that you work on.

[@Timberns]

@@robertsharp8804 Diesel mechanic in the military?… Best not let Clint hear you say that…lol

[@stevenlatham4397]

Area Diesel is such an excellent company. They’re like you guys, a rare company that cares more about quality and their relationship with customers than profit.

[@Greg_Gatsby]

I first saw Area Diesel watching Watch Wes Work. They have a large and well deserved fan club.

[@thomasbailey8306]

It's Awesome how You take care of the Equipment you sell. You Business is a Dying breed in this Country Unfortunately.. It's nice Too see that There's still Companies like Yours Still around .Great Job Everyone. Area Diesel is another Company . Great Job too both Companies..and Great Video Clint

[@rickc5197]

Big head club here. It's like a magic moment when a hat actually fits. Not many do.

[@proberts34]

7 5/8 here. I hear you brother. 😉

[@johnshelley2540]

Good man, you offered it for sale then noticed a bad fault, then repaired it to a high standard! work like this will only enhance your reputation for a honest supplier of good plant!

[@kylejones2075]

You know you're making me salivate with that setup for logging well once again thanks for sharing great video

[@paulprigge1209]

That’s the idea! Machine might be spoken for but he will have others.

[@garysoykin2783]

I was very impressed with area diesel when watch Wes work went down there and they took a tour of the plant top notch company. Very good workers skilled oh my God great folks.

[@clarencewiles963]

Area Diesel’s is amazing I’ve been watching their channel. I’ve watched them build a water pump for Captain Kleeman. If it attaches to a Diesel they won’t turn you away. 😊 Thumbs up 👍

[@melvincapps5975]

Them young boys stay with you they gone learn something I'm learning something just sitting at the house watching video

[@georgeenriquez612]

I really like the how to educational videos Clint 👍🏻

[@busterbailey370]

Another great video Clinton and everyone keep them coming please

[@mischef18]

Another great video guys and yep Kevin is sure special bro. Safe travels. Oh a big thanks to Area Diesel too

[@nknatewood8226]

C&C Equipment: Another of the channel's excellent video presentations! It is _ALWAYS_ fascinating to watch the crew work thru a _repair/replacement,_ or a _complete rebuild._

[@buzzycaswell4081]

You guys have the best videos 😊

[@everestyeti]

Saw an in depth video over on Captain Kleeman channel where Area Diesel fixed something for his 555, which you got him and he's still having to fix. 🤗 They're set up is awesome, they really know that they are doing. Poor Kevin, small feet, T Rex arms a large head and vertically challenged. Perhaps it would help, if he was able to bring an emotional support animal to work 🤣😂🤣😂. Great fun watching you guys, always good that you can have a bit of banter in the work place.

[@C_CEQUIPMENT]

Lol

[@proberts34]

If Kevin had an emotional support animal, it would probably be a dachshund. 😉

[@Richard-C]

your new employee is very lucky, he got a job with a great boss and a very talented instructor, 👏👏👏👍👍👍

[@thebear5454]

With every video you put out I learn a little more. Thanks for the Channel Clint.

[@darrenblattner2508]

Sure is nice when people all work together, cool video Clint. Nice paint Kevin. Keep smilin

[@tyronestucker8980]

Sounds like Kevin was beating the new paint off that dozer.

[@tomrunge2016]

I really enjoy your videos. You all seem to work great together and have a good time doing it. This is one of my favorite KZbin channels. I am so impressed with the welding skills of your son. I can’t say enough good about your videos. Thanks for sharing!

[@kevinkenyon7045]

Clinton Kevin and Scott great video! Thanks for sharing! Kevin

[@Lee-At-Green-Pheonix-Rc]

Alot of famous manufacturers could take notes from area diesel service (one name I hear a ton of from other fine youtubers ) u Clint and the gang from C&C could they could learn a thing or two from you guys on customer service + excellent reputation not many honest companies out there that cater to the average hard working Joe 👍

[@C_CEQUIPMENT]

Thanks

[@lewisjohnson2732]

Kevin the big head small frame lol 😂

[@ricka5471]

Great video about the pump r&r . Watched ads video. Was great to learn how the pump worked.

[@brentking-gmailking2570]

Great job Clint.

[@moman0166]

Let’s name Kevin MINI LURCH. He reminds me of Lurch on the Munsters Show. He has that same facial expression working or talking. I do know he is a darn good technician.

[@terryrogers1025]

Area diesel service does a great job on everything they do as far as I can tell, good people hooked with good people (C&C, good people), thanks for the video, good stuff.

[@C_CEQUIPMENT]

They are great for sure

[@randyclyde4939]

Great video, great project and great guys! You all are in my small group of favorites. Love it when a new video comes out. Stay well, stay safe!

[@paulneuman2303]

Great video. brings back memories from the wrenching days. Enjoyed the video Clint😄👍

[@michaelmullins1290]

Area diesel crew sure sends stuff back in pristine condition. Im no mechanic. I didn't like puzzles. I do like watching you guys.

[@trickstothetrades1801]

I’ve done a lot of CAV pump replacements but my skid steer has a Stanadyne pump so I let Progressive Diesel near me R and R it. After watching your video I’m glad I did. (I also couldn’t find the timing marks, they told me its a pain on the skid steer so it was a good call)

[@souzahome6960]

Great video. like Uncle Scott's summer hats

[@michaelburton5760]

my favorite channel good job clint and crew

[@garymessina1609]

You don't want to know how many of those I removed and repair it the field great thanks Clint and the guys

[@jburk8600]

Enjoyable as always.

[@carloskawasaki656]

Thank you, i learn a lot 👍👍👍👍

[@kerrygleeson4409]

Thanks for sharing guys always interesting 🦘

[@andrewruble7706]

Another great video from the shop. Thanks

[@hugha9769]

I am doing a rebuild on a JD 2640 Tractor with a 4045 N/A Motor I acquired form an action. After a recent test drive, it would appear my oil level is increasing. Does not appear to be the exact model pump but very similar. Looks like I am a potential ADS customer. Very timely video and thanks for the heads up. This is exactly why I watch KZbin videos, especially yours.

[@C_CEQUIPMENT]

Yea If it’s one series earlier you can replace the seals yourself pretty easy

[@johnroberts8475]

Well you sure made this dozer look new nice little machine with all the extra's Clint, someone will be happy with this.

[@randallnottingham799]

Great video on a injector pump Clint

[@thomasdesmond2248]

So it's bobblehead Kevin. LoL God bless

[@ronbianchi7545]

great content as allways

[@toddherbrand4507]

Awsome video thank you so much fun and informative as always

[@keithwallington4966]

Lookin good there 🤟😎

[@melvincapps5975]

57 going on 58 had come up and learn something free labor but I'm not able but I'm still learning keep up the good work

[@kevinmurray7135]

Man you weren’t kidding that was a good POP 👍😎🇺🇸NY

[@peterouellette3874]

Nice job guys

[@jonshelness1600]

I watched the Area Diesel video. They have a shop here in the Des Moines area, too

[@Chris-wb7ni]

Nice machine

[@rhondasweeney7271]

Awesome video! Poor Kevin, my sons name is Kevin and he too has a large head! Must be in the name.

[@chrisgalliher497]

I sure wish I knew that trick 12 years ago when I had to put a injection pump on a case wheel loader

[@rockman531]

Thumbs up! Great video. Take Care, Jim

[@thomasleonard1846]

A fine job!

[@leespellar9074]

Love the video! Kevin funny as always 😅

[@rudyrivera7426]

Thanks for sharing! 👌👍

[@timmoore486]

Don't know where all its been, but it was a West Virginia or Kentucky dozer once upon a time Leslie Equipment

[@jimvoehringer7458]

Did sixth of these pumps good job

[@richardellis3141]

very nice work, that pump runs nice,,

[@R_R_R_R_R_]

9:00 Kevin in the background just making sounds, jibbering away like a mockingbird. I have found my doppelgänger 😂

[@blakes9634]

Uncle "grumpy cat" Scott does laugh, glad to see it. 😂 As always, great video, thanks guys!

[@ARA-tg2hl]

Great video with great content. Keep up the good work guys.

[@paulprigge1209]

LOL! I thought I was watching Zeth at first. He is a mechanic John Deere KZbinr of Illinois. Really really good. Sort of like y’all.

[@davidcolesr.8628]

Good to See You Fella’s

[@thomasyerbey337]

Great video Clint 🇺🇸

[@harolddonaldson2782]

I need the tool cabinet!!!!!!!!

[@cwbean3087]

You sure Kevin doesn't need a mental exam check up?!!! Lol. Good video again!

[@bobscott9253]

6:12 for those whose anxiety is too much waiting for the alignment pin to fit:)

[@rileyroberts4586]

Riley Roberts Is Watching

[@rickallen6378]

I really like the way Kevin trims that beard.

[@davecrable1356]

What was all the racket about in the background while you were trying to work removing the pump? Sounded like Kevin was practicing to work at the airport as a luggage handler...🙂

[@stevenr8606]

👍 always great informative info. BTW, I was wondering what was wrong 🤔. I had the wrong hat on. 🤯 We all knew Sausage Fingers was making the noise. But, was he working? 🤣🤣🤣👍

[@patrickcolahan7499]

Nice work as usual. I'm in the PNW, but have some plans to replace my injectors on my F350 7.3. Will be contacting Area Diesel Service when that time comes. Thanks for sharing.

[@daviddesimone342]

Kevin : The “Rip” Cole Hauser (Yellowstone) of the C&C shop !! Mrs C&C ? Beth Dutton ? LOL

[@C_CEQUIPMENT]

Lol

[@bikerdad63]

Thats some serious cleats on them tracks. Im the opposite of Turbo Kevin, I have a small head its difficult finding hats.

[@randydobson1863]

hello c&c equipment its is randy and i like yours video is cool thanks friends randy

[@sonnyboy2273]

Great Video......Thank You.....

[@timcope3115]

Come one now! You know you have to use a C or S wrench for that nut on the back side of that pump just like on the ones on a NT855 cummins. You didn't sho the cursing involved in that. LOL

[@RichardHeadGaming]

Can you imagine Kevin at 2 years old trying to stand up..... they prob called him Weeble Wobble.

[@ianwebster4329]

Hi Clinton - love your videos. But a bit disappointed to see so much overspray on that machine. PS - you should actually be using HVLP spray equipment - you'd get a totally acceptable paint finish for your type of work, dramatically reduce your overspray problem and same a fortune on paint

[@quietbrianquiet]

Thumbs up and comment for sure!

[@C_CEQUIPMENT]

Thanks

[@Timberns]

And a tip… Before you blame your Stanadyne pump for a poorly running machine… Make sure you don’t have a hidden kill switch that’s functioning intermittently… lol

[@user-kr9mh5oi1q]

whens the milwaukee giveaway LOL I am convinced you designed every piece of eq, is there anything you don't know?

[@melvincapps5975]

I have watch what the guy that rebuilt those pumps knows what he's doing

[@mathewsmith2650]

are you trying to say kevin went from sausage fingers to sausage head trying to that hat on lol

[@Fatamus]

Yeah it helps when you have the correct tools especially when working with high pressures and tight tolerances. ADS do injection pumps every day; it is not cost effective to do it yourself.

[@C_CEQUIPMENT]

Correct

[@Will-No-Co]

Nice timing. I’m rebuilding a JD450 track loader. The engine was shot, so I bought a 4219 and the machine shop informed me it had a long crack in the block. Bought another 4219 and haven’t sent it out yet. So, now I have two of those Stanadyne pumps. Would it be worth having Area Diesel rebuild one for me and one I could sell? Or is it to cost prohibitive? Thanks guys.

[@C_CEQUIPMENT]

I’d probably just get the one fixed

[@Will-No-Co]

@@C_CEQUIPMENT Thanks

[@AreaDieselService]

We offer quotes - hit us up if you need anything! Depending on the type and condition, we are also known to buy cores if you ever end up with extras you don't need.

[@Will-No-Co]

@@AreaDieselService I was planning on contacting you to repair the one I have from the JD4219. Just got busy today. I’ll get the model no. And a pic and email to your company tomorrow.

[@bucksnortbumblefuk6872]

Clint, I'm working on a old paver. Needs all new track pins. Smaller diameter, 1/2". Anyway, what material are pins usually made from? 4140? As usual, great vid!

[@C_CEQUIPMENT]

Yea That would be my guess

[@steveblocher8437]

I tried using a steering wheel puller and the gear hasn’t moved yet. I’m back rewatching and realized you guys used a different puller. What was it? Any idea where to get one? The job was going so smooth until I got to that gear. Also, how much fuel will drain out of the smaller line on top? Thanks.

[@chucksinger1916]

Don’t worry Kevin I’ve got a big head too lol !

[@raypeoples]

Me too also,those "one size fits all" don't work for me.

[@roybaughman306]

Harbor freight tools look so nice..I wish everyone luck..I just wish I have a little more luck to win...lol

[@rustompilapil9839]

good day sir, what is the possible reason why no deseal appears in the injectors?

[@davidellenbaum1229]

crow foot /line wrench. press on end of the shaft where's my summer time hat

[@CraigMolesworth]

How would you verify #1 TDC if you have the older pump, before removal? Fly wheel pinned but you cant pin the pump and the window faces the block.

[@C_CEQUIPMENT]

Check to see if #1 cylinder valves are both closed

[@tjeerdwiersma464]

Did you take the bolt out of the flywheel???🤔😳😳 Greetings from the Netherlands!🇳🇱

[@C_CEQUIPMENT]

Oh yea

[@jwdickinson643]

wtf is Kevin beatin’ on?!?!🤣🤣

[@julianperryman2238]

Hi Clint and team love your channel I’ve tried buying some merchandise and was told you can’t send to the uk . Could you try and fix this please I really need a 2 caps and hoodie 😂 . Keep up the great work 🇬🇧

[@C_CEQUIPMENT]

Maybe in the future

[@joelhutchins7256]

Who is 'Mason'? I have heard his name the last several videos. I assume he is a shop worker. Thanks, Joel

[@C_CEQUIPMENT]

Yes just a friend of my boys

[@csnelling4]

That poor lad, has a bighead ,small feet and sausage fingers but a good sense of humour and great at making a din when you are filming, Clint 🤣🤣🤣🤣thanks for the video 👌👏👏👏👏👏🍺🍺🍺🍺