@Aloha Akahai a cherry picker has a box this is an order picker.
@jigzonyt5172 жыл бұрын
We just witnessed the mating dance of a reach truck and a cb
@MrP-zt5rn2 жыл бұрын
The birds and the bees
@gerardoflores5851 Жыл бұрын
It's an stuck (cherry) picker...
@2pocalypseАй бұрын
😂😂😂😂
@krashd2 жыл бұрын
I hope the orderpicker doesn't get stood up often, it's self esteem will suffer.
@irvan36mm4 жыл бұрын
Thanks for this video. I’ve always wondered how they got those high-mast reach trucks & order pickers in a warehouse bldg with normal height dock doors.
@Xachremos3 жыл бұрын
I saw two get delivered to my workplace. The truck they were delivered on had a crane on the back. Dropped it off on its side in a regular loading door, then backed into the warehouse through the big boy door
@DONK80082 жыл бұрын
At mine the extended mast ones came in without the masts installed as they were too tall for any external door. They used a bigger forklift and installed it inside.
@danquaylesitsspeltpotatoe83072 жыл бұрын
So order pickers are only any good if you already own two forklifts! The guy that didnt have two forlifts found that out the hard way when his low box arrived!
@user-yy3ry4mg4r11 ай бұрын
This is a great video on what never to do. Rigging, personnel placement, torque impact on the rigging straps, running the forks through the strap eyes, etc, etc, etc.
@boxhawk50706 жыл бұрын
The video should have shown the logistics manager refusing delivery and calling up the Raymond rep saying "I just spend 30k and you idiots send it to me on it's side?"
@myfoneuploads6 жыл бұрын
Boxhawk: That lift has a 10 to 12 foot lowered mast. It won't go in to the back of a semi trailer standing up. (Or a standard dock door). All manufacturers have to lay lifts that size down for transportation.
@carryeveryday9106 жыл бұрын
myfoneuploads Pretty sure he was joking lol
@jaywilbur5156 жыл бұрын
flatbed?
@ElectronicsForFun5 жыл бұрын
how else were they going to transport it? it's way too tall to leave it standing up.
@antypanag1Ай бұрын
for reachtrucks they remove the mast prior to transportation and re install it inside the store - i have no idea is this is possible to order pickers
@atomknight83613 жыл бұрын
Nice. I've seen them on their side like this for maintenance. Never seen it lifted back up
@helidude35022 жыл бұрын
This process had the potential to go sideways. Literally. The supervisor or whoever was in the squash me zone. Because the one with straps didn’t stay directly over the load, it had the potential to pull that one over also. ( unless it was much larger)
@dougmillhoff91922 жыл бұрын
Most people don't appreciate just how massively f*cking heavy forklifts are.
@gamechaser0022 жыл бұрын
The one I drive is 5 tons, and sized to fit in smaller 12-pallet capacity box trucks...neatly; be less of a tight fit if the safety strobe was underslung rather than top-mounted like a top hat...but, meh.
@terryhoyt20582 жыл бұрын
Yup. People don't realize these are much heavier than a car. This machine pictured will double its weight again once the battery is in.
@dougmillhoff91922 жыл бұрын
@@terryhoyt2058 Let's just say you don't want one of those things running over your foot. Or your Tesla.
@FosterC1449 ай бұрын
Yeah, the OP i drive is 8 tons, you wouldnt think it would be the slightest bit heavier than a car, until someone crashes it into an isle and it bends a whole section of solid metal in simply going like 4 to 5mph
@dougmillhoff91929 ай бұрын
Gotta be a good bit heavier than the stuff it's lifting, after all.@@FosterC144
@davecrupel28176 жыл бұрын
as an OP user, seeing one down like that gave me goosebumps....even if it is delivered that way, that position is a picker's worst nightmare...
@williambaggerly10986 жыл бұрын
Agreed coming from another OP lol
@abobbybaby49 ай бұрын
WhatEVER!🤷🏿
@TheTechCguy2 жыл бұрын
Always utilize safety and proper operation when in or around industrial equipment, especially around these!
@blueberryisabella37413 жыл бұрын
They made it like easy 👏🏼👏🏼👏🏼
@danc11975 жыл бұрын
I've never seen these delivered nose down. They're usually laying on side fully crated which makes for safer raising. Raising from front to back is too much distance and invites accidents. Side lifting only has 4 feet of width so is less margin for error.
@sonnieandjacob2 жыл бұрын
There is nothing anymore or less safe doing it either way. Ive done thousands of them over the last 20 year both ways and it really just comes down to making sure the rigging you use won't come apart mid lift and that you go slow. Either way its still nerve wrecking to lift a new unit in front of the inevitable audience that gathers around
@cjtheotter2 жыл бұрын
@@sonnieandjacob I was nearby when the rigging Fell apart on one being lifted. Thankfully It was almost to the ground, and there was no Damage done to it, It just made a bit louder Thud
@Virjunior012 жыл бұрын
Solidarity. My bro deserves more for fixing that bullshit.
@krunkle51362 жыл бұрын
Love how "Sweet Dreams" by Eurythmics is playing in the background.
@zachharmon2953 жыл бұрын
Of course it came in laying down. That machine is 12 feet tall at it’s collapsed height.
@noisytim6 жыл бұрын
Oh, that’s clever!!
@Darkk69695 ай бұрын
So it takes a forklift to raise a forklift. Got it!
@heyyou51896 жыл бұрын
The proper way is to call in a professional rigging company and shift all liabilities onto them. Its short change in the big picture.
@benlofgren1803 жыл бұрын
If the base was lifted a little higher then it wouldn't have left the forks of the right truck so abrubptly.
@phitownhustler48024 жыл бұрын
Worked in warehouses in the 70s...Dont miss that work.
@frankmcgrath83642 жыл бұрын
I would always take the crate off first. Easier to raise without it.
@chrisbilling22297 жыл бұрын
wow! nicely done.
@kevindillard54363 жыл бұрын
Not to poke fun at the competition but at my company, we do this with one lift and one technician 😉
@miklomorales47682 жыл бұрын
How
@AddableStone132 жыл бұрын
Try lifting a Raymond turret truck
@kevindillard54362 жыл бұрын
@@miklomorales4768 we use a 6000lb counterbalance. Lift straight up and ride the brakes as it starts to pull you forward. Once it’s upright, cut the banding and use the mast of the counter balance to lay down the cradle.
@miklomorales47682 жыл бұрын
@@kevindillard5436 makes sense lol
@MrAndycm4 жыл бұрын
Good job
@DailyMyChildhood3 жыл бұрын
I had done it ,good video 🙂
@JorgeGarcia-lt1ic6 жыл бұрын
I am a Raymond technician and that is not a video worth putting up .as a safe method to lift a order picker it worked but has probability for failure. if crate plate broke there goes the new truck or if forklift with strap lean forward😲
@BrogreProductions6 жыл бұрын
an order picker*
@maphilib6 жыл бұрын
And I am service technician in Belgium, about 30 years now, from Toyota BT and this is NOT the correct way. The got lucky that the wooden blocks beside the mast don't slips away when they tilting the machine over his dead point. Normally the forklift, an the right side, always have contact with the order picker and even lift the machine of the surface ... hanging freely of ground when they tip over. And the forklift on the left must always have the straps under tension, never get them loose and that is why the machine suddenly and unsuspected tilting over leaning on the wooden blocs ... :( They both make a mistake This was ... terrifying and nearby ... As my dear collega, Raymond technician, Jorge Garcia already told. This could have been gone wrong, they just got lucky
@Awesomewolfpic5 жыл бұрын
Thing is they probably were never told how to stand them up or how to do it so they just did what told get it up so did whatever idea they could come up with. They were probably never given instructions from the makers how and their boss since never were told how came up with this idea.
@andyfreeman6603 жыл бұрын
Toyota tech with 30 years under my belt. Spent the last 3 weeks standing up OME's and this is not the way to do it. No back up if anything goes sideways. Putting your trust in some crusty knotted slings and a few bits of timber.
@Mario-cv5el2 жыл бұрын
Who cares jackass
@MrSaemichlaus6 жыл бұрын
Forklift on the left should've lowered his fork significantly (effectively shortening the strap whatever way). The way he did it he objected himself to a lot of leverage.
@nmotschidontwannagivemyrea89323 жыл бұрын
If he had done that, the OP would have just slammed into the ground and damaged itself and the floor, no?
@MrSaemichlaus3 жыл бұрын
@@nmotschidontwannagivemyrea8932 I wasn't clear enough, sorry. I mean the straps on the left forklift should've been much shorter, so the forklift could keep his forks much closer to the attachment points on the OP. Of course he would always need to keep the straps in tension. I guess they had to avoid the OP's operator roof with the forklift's forks, but I don't know why they opted to go higher rather than lower. Maybe they just didn't have the right length of straps available.
@nmotschidontwannagivemyrea89323 жыл бұрын
@@MrSaemichlaus Fair enough. Considering that they didn't have a proper material hoist for this job, it's possible they didn't have the correct length of strap, either.
@walterforrester79172 жыл бұрын
Is the rudeness really necessary? Swear words just show the inability of a language. And that we all know come from not the sharpest pencils. I just had to mention it.
@davidhoekje78426 жыл бұрын
Nice job. I see others saying it was done improperly, maybe so. I wonder if it ships with righting instructions?
@Awesomewolfpic5 жыл бұрын
I don't think they do and they expect companies to know how to do it.
@noja45952 жыл бұрын
How do you get the first one delivered up???
@rah1382 жыл бұрын
nice
@normanrabino70062 жыл бұрын
Whoever did this is fired fired
@3D3LTA6 жыл бұрын
When we got our trucks delivered they came in a semi with an open top so they stayed upright the entire time.
@ChvdOB6 жыл бұрын
3D3LTA how did u get it out? From the top??
@Awesomewolfpic5 жыл бұрын
Said open top so most likely rest of top comes down so can drive it off or use other lift to pull it off.@@ChvdOB
@nmotschidontwannagivemyrea89323 жыл бұрын
Not every place has doors/gates high enough for the machines to get into the building.
@AddableStone132 жыл бұрын
Just don’t drive under a bridge
@mikesecondo22546 жыл бұрын
This is how we do it.must have installed over a dozen of these... and at least 6 swing reaches.many comments stating unsafe,osha crap.....well how else would you stand it up??????
@brandoncaldwell956 жыл бұрын
Right? If it works, and nothing happened. Perfectly fine. If something were to happen, oh well, fix it or order another. OSHA cant be an excuse for everything, especially getting out or work or costing someone more money..
@kelliw18094 жыл бұрын
@@myfoneuploads You have to be the dumbest person in his comment section it's hilarious
@nmotschidontwannagivemyrea89323 жыл бұрын
With a material hoist or crane that's designed for these types of tasks.
@Meownold6 жыл бұрын
That's how it's done in India.
@IACUnited134 жыл бұрын
Cabless?
@thicc.pikachu3 жыл бұрын
forklift on forklift action
@annonimouse93426 жыл бұрын
How unsafe is their way of top and tailing a VNA machine, yes the machine is a lightweight compared with some I install, a large truck 4 ton plus, with a job, and a crane on the other is the only safe way.
@muhamadmizanngateni58596 жыл бұрын
U are lucky... work under risk ..Reach truck BT is very good, can dismental mast ... raymond R&D must do something for good and safety machine installation at customer site or outdoor...
@doneown5033 жыл бұрын
So, NO claim to have ever worked in warehouse envirn, But I have ridden on a man lift, which is essentially a moving belt, with places to grab , and rest ur ft,
@catwithabat71633 жыл бұрын
Question, how the fuck does this happen to BEGIN WITH Edit: it looks new, so is this how it was shipped?
@martymcfly58426 жыл бұрын
All they had to do was put a chain around the mast of the forks raising it and attach it to the crate. Then there would have been no chance of it slamming to the ground. They got lucky if you ask me.
@nmotschidontwannagivemyrea89323 жыл бұрын
That's all well and good until the wood snaps. And where on the wood would they even be able to chain it to?
@dr.joint42046 жыл бұрын
you know you have shitty workers when you need a jack in you're warehouse to pick up forklifts
@Virjunior012 жыл бұрын
Shit happens, man. Be cool.
@demarco7672 жыл бұрын
That's a reach trunk, not an OP.
@natesfishingadventures2065 Жыл бұрын
Look again
@derekcarstensen91342 жыл бұрын
I’ve stood up many of these that was totally 100% the incorrect way of doing it the right fork lift should have continued lift until it was almost vertical the the two let it down evenly
@joer906011 ай бұрын
Correct. That short free falling moment is exactly what we try to avoid.
@MattSlocumSQL6 жыл бұрын
Cool video, but please enable image stabilization. Camera person has a shaky hand. :D
@myfoneuploads6 жыл бұрын
I have stood up and laid down dozens of Raymond Reach, order pickers and swing reaches. This is definitely NOT the correct way. WOW! I've seen sales man do better this.
@ZombieZim7136 жыл бұрын
yup, same here..work for a raymond dealer. this is a great way to drop the truck if the cradle fails.
@kelliw18094 жыл бұрын
What a bunch of tight but virgins get a life
@abobbybaby49 ай бұрын
So what’s the big deal to even warrant a KZbin video?🤷🏻🤦🏼♂️
@sunilchougule66812 жыл бұрын
Sunil chougule
@sunilchougule66812 жыл бұрын
Sunil chougule
@Bryanbobber6 жыл бұрын
easy
@Plattencautious7455 жыл бұрын
Yay you
@tommyd66654 жыл бұрын
Whos getting fired????
@mikesecondo22546 жыл бұрын
Duh uh?!
@joelmartin25496 жыл бұрын
These guys act like they are scared of it. That's how you get hurt.
@nmotschidontwannagivemyrea89323 жыл бұрын
That's a ridiculous statement. Would you prefer they rush the job and let the machine slip and slam into the ground? (Of course, this isn't the correct way to stand up a machine like that in the first place, but that's besides the point.)
@roberta.3301 Жыл бұрын
Good to see a video about a Raymond....Best Equipment made....Instead of a Piece of SHIT crown....worst equipment made
@irvan36mm4 жыл бұрын
Thanks for this video. I’ve always wondered how they got those high-mast reach trucks & order pickers in a warehouse bldg with normal height dock doors.
@alanthebulwark3 жыл бұрын
They brought our stockpickers in like this, but the turrets came in pieces and then put together.