Stanley MR77 Rivet Gun Repair!

Short Video on how to disassemble the head of this rivet gun and reassemble it - You can also use a pen or pencil where I used a socket/driver tool.

[@marvinshook9142]

Exactly what I needed. Thank you.

[@handydantheman8030]

Glad it was helpful

[@dt9577]

Clutch video, thanks for posting!

[@CoachDChapman]

You bet!

[@plazmeh999]

Saved me with this one, thanks for posting! Didn’t even realise you could take the head apart!

[@handydantheman8030]

Glad it was helpful to you!

[@steve-wx4kx]

Dan, thanks for the video. I borrowed this exact same rivet gun from a friend and similar to you opened the head and the pieces fell out. Not knowing how to properly re-install the pieces I found your video and put it back together in a matter of seconds just like like a rocket scientist!

[@handydantheman8030]

So glad I could be of help man

[@GRAHAME1BNT]

i just put mine back together but after seeing your video realised i had done it wrong thanks a lot 😀

[@handydantheman8030]

Glad it helped!!

[@rongieg4795]

Totally appreciate you taking the time to explain a very easy job. It seems to me that maybe Stanley needs to improve on this very handy mousetrap. Just saying...

[@juditraves6344]

Great simple explanation that has helped me fix my river gun?

[@handydantheman8030]

Glad I could help you!

[@kendavis8138]

Bostitch makes one like this, I took it apart and couldn't get it back together. Thanks to your video I will try again.

[@CoachDChapman]

Glad it was helpful!

[@احسانامینی-ت8ط]

Good very nice

[@handydantheman8030]

Thanks!

[@Mentalfloss64]

Thank you! I've used my gun for years but today a rivet shaft got stuck and then I managed to make it worse. I'm going to go disassemble it now! Have a good holiday season!

[@handydantheman8030]

Merry Christmas man - glad it was helpful to you.

[@paulblouin3966]

Thanks, man! This saved me so much headache.

[@dannychapman456]

Glad it helped you man

[@meiming1]

thank you for trying. Unfortunately my staneley riveter, a newer model has these annoying screws on either side so you can't just scree in the bit oat the back and finish You need to align the screw holes and both sides whilst holding the spring in. Impossible. I tried for more than an hour to align all the holes. It aligns on one side and then not the other. They make it harder and harder to fix so you have to buy a new one. Rocket science!

[@handydantheman8030]

That does sound frustrating.. Glad I have two of the older ones. You call the company?

[@mr.z541]

thanks mate - i couldn't remember what order all the bits went back in.

[@CoachDChapman]

Glad it helped!

[@endwrench]

Thanks

[@kellycordner1]

thank you very much for this. i tried several part ordered variations and none worked. Your instruction also works for Stanley 100cg. When i opened mine, some parts shot out 10 ft. Be ready.

[@dannychapman2758]

k cordner Your welcome man - glad it was helpful.

[@michaelblackwell9522]

Helped me thanks

[@brennanbair5699]

Is that a glass table?!Freaking me out lol

[@handydantheman8030]

Brennan Bair it’s part of a computer desk and it is made of glass.

[@TheAlabamaWildman]

DANKE' !! !!

[@dannychapman456]

Very welcome

[@christianjensen5523]

Thank you, very helpful.

[@handydantheman8030]

You bet

[@coreyreed4708]

Thank you! Thank you! I was looking online to buy a new rivet gun when I came across your video with the same problem. I took mine (mostly) apart but had no idea the head unscrewed out like you showed. Now I can finish my guttering project! Much appreciated and super EASY fix!

[@handydantheman8030]

You bet man - glad it relieved some of your stress.

[@robbaker40]

Thank you!

[@1kllam]

Really helpfull, tank you

[@dannychapman456]

Glad it continues to be helpful! (Me on a different account :)

[@michaelshin69]

Thank you. I was trying to figure this out tonight. Awesome

[@dannychapman2758]

Michael Shin welcome man. Glad it helped.