The Most VERSATILE snow pusher in the world.

I needed a BIG pusher that I could easily trailer. What I found was incredible! #snowpusher #equipment #snowplow

[@joshuateets4309]

could watch hours and hours of that kinda dynamic plow work. LOVE IT!

[@michaelatoz580]

Soon the pusher will cost more than the skid steer.

[@sibleystud]

It does cost more than some 😂

[@middletnpyro]

probably already there 😬

[@steveanderson4768]

I would love to know how much that thing is my guess is $20,000

[@middletnpyro]

@@steveanderson4768 easily

[@gavinperry7237]

Made In Canada 🇨🇦🇨🇦🇨🇦

[@countrycaretakerpropertyse7981]

Great video Stanley. Met these guys a few years back when this blade first came out and demo’d the 6-10 on a tractor. This unit is absolutely incredible for cleaning parking spots between cars when we go do our final cleanups! It also excels in tighter loading docks as well! Very productive unit.

[@coreywillis9417]

did you end up purchasing one or just the demo?

[@countrycaretakerpropertyse7981]

@@coreywillis9417 we just demoed it as our 4066 has loader arms. We bought a cotech blade though. It’s an ext rev 6-10. They’re built extremely well! If I didn’t need to load salt I would’ve bought one of these. The mounting brackets for the tractors are where Stanley’s blade shines.

[@dexewing1]

Perhaps the most advanced pusher? Seems highly versatile. But with so many moving parts that might be more chances to have problems? Then again if the company is Canadian, they do know a thing or two about snow and how to move it effectively. Thanks for the excellent video, Stan!

[@jamesnm21]

Sure didn't scrape very well. Might be the poly edges or the float feature.

[@roybdaman]

Great piece of equipment. Brings efficiency to a new level. I've seen these before and the design never ceases to amaze me at the thought that went into this.

[@TRLMX]

Nice! `Thanks for showing the details about this attachment.

[@TheHighKirk]

Simplicity is the most direct path to competency.

[@robertvannicolo4435]

Stan it’s no arctic sectional doesn’t scrape as well but if doing large areas at different sites nice to be able to transport and not have to remove. That’s why I bought a 8’ Arctic but it’s been sitting haven’t had to put on loader this year

[@Andrew_Garcia1]

I think the Arctic is better in a few ways, but if you are one that trailers a skid steer around, want to haul it legally, and have a lot of production it’s hard to beat. Time will tell on the longevity of it. Thanks for all the great videos only complaint is we need more videos!😂

[@jadelhamilton7339]

I love the concept of it great for when you’re constantly on the move from site to site, but that artic is way better at scraping that sticky snow, the free float on this one takes away from the force to the ground and you would expect the weight of all the steel to make up for it I just wasn’t seeing it

[@jamesburba1995]

That is a fantastic pusher blade. I can see you 'inventing' all kinds of things to do with it.

[@quincyvenable2279]

Love all the snow videos please keep them coming!

[@Nsanderson1971]

Seems nice but looks like they need to stiffen up the springs so it doesn’t collapse forward so easy.

[@beardedguardian71]

You never cease to amaze with these new plows

[@AliBaba-mp7zb]

That's an awesome pusher. Enjoying your videos Stan pushing snow. While rest of us seating here hoping for it snow🤷🏾‍♂️.

[@timothyhatcher8673]

Awesome video once again u never fail to cheer me up

[@viperlocc]

Cool pusher! What sunglasses/safety glasses are those? I like the way they protect the eyes.

[@terresiagregg9326]

Thats awesome how you are doing the plowing between the vehicles

[@buffydog21]

Although I live a few states to the east of you, we haven't had the snow, like you have had. Today, we're supposed to be near mid 50s. Next week, we're going to be close to 50s. We have no snow on the ground and haven't had much snow at all this year. We've had a few bouts of heavy snow, but then it warms up and it all disappears. Tuesday and Wednesday 50s, then Thursday and Friday 30s, then upper 40s for next week. Normally, we would have a typical winter. My neighbor hasn't made in money in snowplowing part of his business. He's looking to lawncare instead. I remember the blizzard that hit the Midwest in 1978, but was only 2 years old at the time of the 1967 blizzard.

[@Derf1313]

Wow... & that concrete you were rolling sure wasn't fluff... Thanx!

[@greghenderson755]

Awesome for trailering, can't wait to see it in fresh snow...

[@colinkedzie3789]

Im sure it’s great new. How will it hold up after 3-4 seasons of getting smashed into curbs and frozen snow piles. My guess is those wings won’t slide in and out so easily and I haven’t even gotten to corrosion from ice melt. I’ll take my 10 year old Arctic Sectional HD over that any day. These engineers never have to fix this stuff in the middle of the night with 4” of snow on the ground and -10 temps. Less and simple sometimes is more!!

[@James-blond007]

So badass Stanley!!

[@CZAnthonyX]

I did notice that it does not seem to scrape all to well over packed in snow. What do you think?

[@lesleyboeder1798]

You can get it with a steel cutting edge. This is great for driveways they don’t want to scratch up

[@Jay_the_Caffeinator]

That is awesomesauce Stan!! This will change your game!

[@theoneonlymonkeymanohyea6769]

I still like the arctics when you compare how the cutting edge is on the arctics compared to the cotech

[@briannelson6259]

Stan, You Have Been Showing Some Of Coolest Pushers I Have Never Seen 😳 Wow Now That One's A Game Changer 👍 Such A Slick Design 😁 Stay Safe And GOD Bless You Always ✝

[@trainloader9012]

Interesting and educational video as always. It will be interesting to learn how durable it is overtime with the amount of moving parts and lack of rigidity. It’s easy to get caught up in capturing the right angle and footage when filming and forget that you are interfacing with a piece of equipment that can amputate a hand or finger in an instant with the accidental touching of a switch by the operator. Keep focused on your safety when filming and use a pointer that allows you to keep your arms, hands, and fingers a safe distance away. You will be safer and what you are trying to point out will be more obvious and precise to the viewer. We love your videos and do not want you to have to make them one handed.

[@billhull6842]

I am concerned with all the moving parts. Everything works good now but I am wondering what happens when something doesn't move.

[@CZAnthonyX]

Id love to give this thing a try pushing the snow we DONT have LOL! This thing is awesome! Hows that Cat machine been working for you after all of these years? Hope you have an awesome week! Have you had many snow events recently?

[@chipjohnson3357]

Hey Stan! Still watching obviously, but I remember you had a video with the guy on the phone up in Canada a while back. They had it on a jd tractor and it was a contest with a skid steer.

[@chrism5239]

I was just about to comment this same thing.

[@sneezinhatch]

Have one I love it but it does start to bind when switching from back drag to push

[@EddieTruckingAdventures]

Looks like great weather but probably flipping cold. Maybe negative 15 degrees Celsius (no idea in the other temp style)

[@EddieSchirmer]

i wonder how that would work in gravel, or stay-mat. i often throw plenty of stones with my snow blower, but i would love to be able to push snow too or back drag when its conditions unfavorable to blow in. but then again, if only John Deere made a better snow blower for my 1026r. it works most of the time, but it clogs way too easily. uses three bladed thrower before the chute, but i think the chute geometry needs work, to be more streamlined. and, maybe a little more power too. perhaps a hybrid would be a great idea too, considering fuel economy, even if 5 gallons diesel lasts me a month or more haha. still, anything would help with the prices increasing all the time.

[@Ragnar1822]

One thing I noticed is that it's a pusher and a dragger.. And you don't get the snow built up in the corners. It is almost impossible with the side boards that rotate.. Nothing more nerve racking than snow build up in your square pusher and it won't push as much as you expected. Yes it will push but the wind rows are more noticeable..

[@tonyioannoni4951]

At the airport we had Cotech, Artic and Metal Pless snow pushers, on my favorite tractor (John Deere 8-280 HP) I had a Metal Pless 10-18 if I remember, fully extended I always left 2 small tracks of snow at the extension point, never a super clean job, I had to make another pass with the plow half retracted, but we had mostly fixed wings, I would have loved the flipping wings, we only had flipping wings on a Deere-744 with a Metal Pless that when fully extended wings out it was almost 30 feet wide, but mine at 10 foot wide you are limited of where you can access and plow, but a 7-12 is capable to go almost anywhere...and to be able to back drag like that is awesome!

[@vpweber]

Ok, Stan, get together with these guys and the Muskox crew and design the ultimate expandable blower pusher!! Love your content, keep it up!

[@michaelshaw8182]

Nice plow. I was wondering when someone was going to make a pull plow that pivots. Bet one is in your future.

[@andysukosd8177]

Definitely a time saver , great video.

[@marm842]

Sweet stan the articulation set up is simlar to my mvp3 westren plow

[@jamesnm21]

I wonder if steel would scrape better or if it's the float feature that leaves so much snow behind.

[@jeremydobbert1287]

Definitely a cool pusher, I would be curious to see the scrape in fresh snow though.

[@anthonysharpfish9108]

Wonder about a extendo dirt versatile bucket mulcher piece

[@terrypercy]

Gotta love the French Canadian brand love. May not understand the guys too too well, but once you see their stuff work. You know what they’re talking about haha 😂 These things are mint for commercial parking lots no doubt. Same with driveways tbh.

[@jamesnm21]

It didn't scrape well at all in this video

[@peacocklandscaping7002]

Great video, awesome pusher! I want one 🦚

[@Smittyschannel]

Does it not scrape down to pavement? Never really saw it scrape clean

[@joshfiske6312]

Literally do 99 percent of what this pusher does with the one I fabricated from 2 2×12 angle iron and industrial rubber edge. It's been snowing long before all these add ons.

[@johnmartin7182]

As always awesome content wow what a AZZ kicker my opinion Best KZbin channel ever

[@matty2helpfull]

Not gonna lie that with a steel cutting-edge in the smaller size would be perfect on my s185 out on the farm with how much it can change and flex

[@jasontaylor3088]

We use them in Québec with a lot of snow !! They are tough and great snow plow !! The best by far 👌👌💪🏻great vids stan!

[@j4y_m1n3r8]

i can agree ive seen these get tossed around they are tough

[@jamesnm21]

It didn't scrape well at all. Not sure if it's the poly edges or float feature but that's an issue for me.

[@InBloomLandscaping]

I'm from Ontario and took a trip out to trois rivieres and noticed almost everyone runs this pusher on the front and a blower on the back of their tractors. I also noticed everyone's front lawns had snowbanks as big as their houses.

[@proconcretecoatings4916]

That’s awesome!

[@dalebargen]

Looks like fun!

[@Moose-rq8gv]

Do you think it will last Stan a lot of moving parts?

[@LyonsdenNC98]

I like the Arctic better. Seems like it gets a better scrape.

[@jamesnm21]

Might be the poly edges

[@patrickrothstein7557]

I’ve seen you with a few different skid steers what has been your favorite/most reliable?

[@Dirtmonkey]

Oh boy that's a hard choice. Check out my videos for some in depth info on em 👍

[@grumpy1311]

A Wide-Out for a Skiddy! Slick Rick! I mean Stan! ❄️ ❄️ This must be the one for the no scratch and sniff client 👌

[@MRPlow-gj4qg]

Getting ready to go Salt. Doesn’t scrape very well with that Polly cutting edge, steel edge will probably clean nicer.

[@Dakotalogger]

Remember Tractor vs Skid steer vid this isn’t the first time we’ve seen the Cotech😉

[@buffydog21]

Look kind of a cool and unique pusher blade!

[@Andrew_Garcia1]

Hey when we going to see that Arctic plow that hooks to a truck?!?!?!?😅😅

[@lawnmanmartinfan7909]

That's a pretty impressive piece of equipment.

[@Hunt0qt]

What an amazing pusher. Truly a game-changer. It would of made this 10 times better if you had it on a deere skid steer instead 😉

[@jamesnm21]

F**k JD and every snooty elitist new world order scum that works there. They're not welcome at my door. Not everyone who works there is bad but we got plenty around here who are exactly what I just called them. Edit: run whatever brand you like btw.

[@lonestar1187]

Where can you but this plow and how much are they?

[@stanhensley3082]

Super super cool 😎. Price?? Thanks 😊.

[@llapmsp]

Another awesome tool for the job.

[@royreynolds108]

Neat machine. Really handy.

[@jesserousseau2481]

Dosent look like it scrapes that good on the hard hard packed stuff?

[@ronnieferguson5706]

Love the pusher

[@stevenstodd2812]

Wow killer rig!!!! What the price?

[@fullmylegroundsllcmyles970]

Bad ass plow. The cat certainly isn't working like the ASV

[@crystalkauffman2463]

Do they still have those plows?

[@frsujongaming]

Awesome vedio

[@bradsantos1885]

Next video will be this pusher vs a artic watch !

[@matthewvukelich9504]

Stan, you kick ass brother

[@chuckb9867]

Staring always shows off the good stuff Timmy though it didn't seem like it scraped as good as the others Maybe I'm Wrong I love the skinny fat idea

[@johntmcguirejr3129]

Awesome

[@jeffkenyon7084]

Yeah its cool didn't seem to scrape well but I'm not there so it might

[@glslawnservices1905]

That looks like an awesome pusher. I hope mechanically it holds up to the abuse for ya. A lot of moving parts.

[@lesleyboeder1798]

Right I can see this being used in driveways and small parking lots. Not really for bulking out huge lots

[@coreywillis9417]

@@lesleyboeder1798 for its size it works for any situation you would put that size machine

[@jesserousseau2481]

If this doesn't excite you, then we can't be friends. Lol amazing

[@markknister6272]

Nice!

[@nashcobb3056]

here to help

[@ryguy151]

A metal pless can't be beat

[@jeannankeefe845]

Wow, someone put some thought in that. I agree with one of the other comments though, it's getting real expensive for these things. They better knock some serious time off your schedule to make it pay for itself.

[@JBWeldist]

What is better for pushing the snow, Tracks or tires?

[@middletnpyro]

snow tracks definitely

[@davidh6292]

I've never seen one in person but I do have a couple concerns after watching. After running an hla snow wing 8-13 this season I think the snow wing is a bettered preforming plow.

[@jamesnm21]

Didn't look like this scrapes well at all. Don't know if it's the poly edges or the float feature or something else. I've never run poly edges.

[@coreywillis9417]

@@jamesnm21 poly edges don't scrape as well as rubber or steel which both are available for this pusher

[@ianunderwood1163]

Love the videos

[@henryandfaithvanheeswyck1237]

Nice attachment

[@blakeflewelling8641]

Love the versatility! Hate all the moving parts! Plus the cost... I'm sure. I'll stick with the snow wolf!

[@gordowg1wg145]

😎👍 - "in the world" does raise a question - there are many other countries that need, and build, machines for moving/clearing snow but how many have english language channels?

[@coreywillis9417]

Their website has an English version

[@crazzyhellman1330]

Sweet plow 👍

[@crystalkauffman2463]

That is a cool plow

[@jff141]

How does it scrap ?

[@heath8779]

I guess the biggest question, how soon before you get one? 👍🤠

[@firstamendmenttshirt4768]

Do they ice up?

[@dmartd20]

Not even close to an arctic, however it does roll snow very very nicely

[@alxanderrodriguez460]

Doesn't scrape very good though

[@olivercotton347]

The Batmobile of plows!

[@idkkdi8620]

Lots of moving parts tho, you know what that means, breaking

[@kalen01]

I honestly don't think it would take long for all them moving parts to get sloppy

[@TheFiremanJoe]

Looks like a lot of moving parts that could easily break.

[@coreywillis9417]

not at all. these units will take serious abuse. I have had 4 different operators running mine and haven't had any issues

[@deniskartavenko2650]

I have a question why do you never use john deer skid steer there, so powerful to and you leave them in the dust like they never exist

[@joshuaplacka8480]

Because they shouldn't exist. Just kidding not much of a jd fan.