Star Delta Starter Wiring Step by Step | Motor Control Basics | Star Delta Starter Made Easy

[@IndustrialControlAcademy]

Thanks for watching! Have you ever wired a Star Delta Starter? What challenges did you face? Which part of the process do you find most difficult? Let us know in the comments! Also, do you think PLC control is better than traditional Star Delta wiring? Share your thoughts and tips below!

[@nhlanhlamanana9822]

PLC and ladder logic is a challenge for me

[@sababut4270]

@@nhlanhlamanana9822 for me, i have same feeling. But this channel has change my way of thinking and give me confidence. see the comments how people expressing scenario with PLC. life is easy now.

[@bonnylasu7665]

I'm both interested in, traditional Star, delta wiring and PLC.

[@AmirShahzadShahzad-g4k]

Highly impressed with the explaination and clarity. Star, Delta and star Delta on same page is more understanding. Thumbs up man

[@tayyabmalik5786]

The most easy way to understand star delta with Electrical control and PLC control. You are amazing man. ❤

[@chmubasharmubashar5530]

"Great insights into electrical drawings. This should be a go-to resource for students."

[@bonnylasu7665]

Mr thankyou very much for your star, delta and control circuit connection. I need to learn more about your video teaching in electrical installation.

[@IndustrialControlAcademy]

I'm glad you found it helpful! Check out my other videos for more electrical installation techniques.

[@bonnylasu7665]

Sir, thanks for your interesting video about how to wire star delta connection

[@IndustrialControlAcademy]

Glad that it was helpful. see other videos on this channel to get basic concept to deal with different motors with different connections schemes. Thanks!

[@HenryRolly]

Thank you. Very interesting journal. Love to learn more of a new electrical technologies invention. thanks much for the explanation.

[@IndustrialControlAcademy]

Glad it was helpful!

[@telosfd]

What I couldn't do is to read in a monolinear electrical diagram how the auxiliary contacts, NO or NC in the circuit of a relay are connected, like the one on the right at 13:56! How are they combined with the contacts of the other relays, e.g main power relay, start-stop, timer and star-delta switching.

[@IndustrialControlAcademy]

its very simple. 1st each auxiliary contact has main component like MCB, MCCB, Magnetic contactor. each NO and NC contact of main component, if being use on same page (any electrical circuit) or on different page, it would have reference page number and the most import thing is to nominate with that component to which is associated. Like O/L-1 is overload main component to protect the the motor to run further. it will stop to pass electricity and also in the control circuit, it will stop other component to de-energize for motor safety. also these contacts move to panel Lamp for local indication and PLC input for information that got got trip on over load. one more thing, if you are confused on wiring, just take the positive wire and pass through the auxiliary contact of individual component and that it. its very easy. 1st you draw the drawing with your own understanding, once you clear, you will do it practically for small circuit. make sure you remain safe while test. take safety precaution as priority. try this small circuit. kzbin.info/www/bejne/h4iUfKSVidxlY5o

[@telosfd]

@@IndustrialControlAcademy Thanks, the last paragraph was helpful!

[@mehtabahmed4432]

This video is great. Making clear the basic concepts. Love your video. a great youtuber. Best wishes

[@IndustrialControlAcademy]

I appreciate that!

[@BasitAli0]

Very informative and helpful

[@exo-580]

very refreshing topic indeed.i have been looking for such insights and this is just amazing channel,i don't wanna miss out for plc related content,letmme subscribe and hit notifications.Thankyou very much my favourite youtuber😇

[@IndustrialControlAcademy]

Thank you. I appreciate.

[@MdAli-r8p3o]

I am highly impressed with the way you explained well. Thanks from heart 🎉❤

[@IndustrialControlAcademy]

Thanks a lot 😊

[@rubbenkudohia5452]

Am happy for bringing great tutorial i love to learn more and more and get clear understanding thanks

[@IndustrialControlAcademy]

Glad it was helpful! Stay tunned for more videos coming soon.

[@progaming-fd9vl]

Highly appreciated. Thanks for good explanation.🎉

[@m.bilalkhan5803]

I appreciate your way of teaching. Love it and impressed . keep it u ❤❤

[@IndustrialControlAcademy]

Thanks a ton

[@joyozoh9315]

Great tutorial. I just started learning PLC, and I must say that I am really impressed with how you teach, making it easy to understand. I am interested in PLC programming. Can you please do a video on PLC programming in general? You can also do a video on the star delta setup and programming. Thank you.

[@IndustrialControlAcademy]

You're very welcome! first you go through these following videos, I believe, it will change your way of thinking after watching these videos. After that, come back here again, and tell me how you will develop the logic scenario for star and delta configuration in PLC when you have 3 contactors. i will guide you in case you make mistake. Feel free to share experience. kzbin.info/www/bejne/g4KTmqesi9-fpdE kzbin.info/www/bejne/g4jCh6iAdsuLbJI

[@joyozoh9315]

@@IndustrialControlAcademy Okay. I will do that.

[@joyozoh9315]

@@IndustrialControlAcademy Hi, This is how I think the star delta configuration in a PLC using three contactors should be. Your videos always inspire me. Thank you for sharing the PLC programming link. Steps Inputs: Start push button (I1) Stop push button (I2) Outputs: K1 (star contactor) K2 (delta contactor) K3 (main contactor) Timers: T1 (star timer) T2 (short delay timer) When the start PB is pressed, K3 is energized, which powers the motor connecting to the supply. At the same time, K1 is energized, which connects the motor windings in a star contactor. The motor runs for a short period specified by T1. When T1 is complete, K1 de-energizes, and a short delay timer is activated. When T2 expires, K2, which connects the motor winding in a delta configuration, is energized and operates at full speed. When the stop push button is pressed, all contactors de-energize, stopping the motor. I appreciate your response in advance.

[@IndustrialControlAcademy]

@@joyozoh9315 Excellent. This is what i expect from you after watching my video. Great. Enjoy!

[@srividyaupasana9206]

Stunning support ❤❤🎉

[@IndustrialControlAcademy]

Thanks...!

[@jacksonntantiso8310]

Please give us more videos for sequences motor starter and oscillating diagrams

[@IndustrialControlAcademy]

OK. Noted

[@rubbenkudohia5452]

Thanks for good work done i need more details from you

[@IndustrialControlAcademy]

Glad to know that. Thank you!

[@Abdul-KarimSadiq]

More explanation on stardelter starter about PLC

[@IndustrialControlAcademy]

Thanks for your request! I'll definitely consider providing a more detailed explanation on the stardelter starter and its application with PLCs in an upcoming video! However, for the basic PLC concept I have videos on my channel. Please just go through it. the purpose of that video to explain the basic concept in very easy way. Good Luck! *Allen Bradley PLC Programming Made Easy: RSLogix 5000 Step-by-Step Guide for Technicians* kzbin.info/www/bejne/g4jCh6iAdsuLbJI *RSLogix 5000 Training for Beginners: Step-by-Step Guide to Allen Bradley PLC Programming* kzbin.info/www/bejne/g4KTmqesi9-fpdE

[@daniellewis1933]

What is the name of the software used to draw the circuit?

[@IndustrialControlAcademy]

Its MS Power Point ppt.

[@HenryRolly]

Hi,apart from star delta and PLC Control. Please can you explain ATS control wiring diagram and DC signals operations according to DSE control for a Generator. (3phase/Single phase. ) thanks.

[@IndustrialControlAcademy]

OK, Noted. I ll try to make a video on it to explain you all aspects. If there is any certain query, do ask me here. i ll answer you as well! ATS wiring is very simple, either you using 2 contactors with some relays, or ATS controller. Thanks!

[@AsmatNazit]

Thank you.

[@IndustrialControlAcademy]

You're welcome!

[@hafezali5367]

Good

[@IndustrialControlAcademy]

Thanks

[@dimitararabadzhiev]

What do you mean DOL direct online. There's no difference between dol star or dol delta

[@IndustrialControlAcademy]

Yes, it was just an overview with DOL and connection difference with Star and Delta. the rest of protection circuit remain same. Please go through complete video, everything explained on a single page please. Thank you!

[@zakariyyasalisu2163]

Pls what about it retaining..