Star Destroyer - Star Wars, STL for 3D printing

[@chopper2429]

Those first cracks at the very beginning are SO satisfying.

[@TKTrooper]

I can’t begin to imagine the thought and planning that had to go into the creating of this model. But then add in the detail you have managed to incorporate into it with the windows, panels and such is truly one hell of an achievement. Not to dismiss the size of this model, which is considerable large than your average models. Truly excelled yourself with this one. This is not a criticism by any means, but I think a stand is a must for a model like this. As others have suggested the ability to add LEDs would be amazing, how lever than would involve another level of planning if even possible with your style of model. But once again, Outstanding sir, bravo!

[@richard-hawley]

That is amazingly well designed, the assembly alone was a joy to see. Bravo sir, bravo.

[@fab365_official]

Thank you for watching and comment!!! Please enjoy~

[@afterglow-podcast]

Very nice! I'd love to see some Star Trek stuff in the future, really enjoying the Star Wars builds as well!

[@fab365_official]

If you have a design you would like to request, please leave a picture and description on the request page. fab365.net/requests

[@D4vi9]

😲 Currently printing the Millenium Falcon.. Now I know what is next!! Thanks for the work!!

[@ripmax333]

If you can add an option for some LED lights it would be epic!

[@samthompson2980]

Agreed 😊 and a final shot of a painted one! ❤ AWESOME work.

[@mikeburton8878]

Take a pin vise and drill out some windows.

[@WoNkY_DoG]

Just finished printing this on my CR6 Max. No problem fitting multiple parts together on the bed and left to print. Easy to follow video while putting together. Now I need to start the print for the stand. Thanks!

[@RenaTamer1]

Oh god, out of all the prints, I want this one... made out of glow-in-the-dark filament!

[@mikesbasement6954]

Outstanding model! I just downloaded and will begin printing in a couple of days. Thanks!

[@fab365_official]

Hope you enjoy it!

[@Anon4994]

Totally amazing!! What Star Wars vehicles next? A Sandcrawler or a Sail Barge may be???? 🤔

[@PaulB-justme]

What a fantastic model! All it needs to finish it off is a tiny Millennium Falcon to glue to the side of the bridge (as from "Empire Strikes Back"! 😃

[@lonniesides9302]

The detail is incredible

[@fab365_official]

Thank you! Please enjoy m details.

[@raven19702003]

wow awesome job .... just downloaded it now to dial in my settings :)

[@fab365_official]

Thanks! I hope you get good result~

[@98f5]

Im printing this scaled up for my 600mm volume machine lol. Itll be almost 2 meters long. Gonna hang it in my garage. Will share some pics on maker world when it finishes

[@fab365_official]

Please share on my review page. fab365.net/reviews thanks~

[@98f5]

@fab365_official a month later ive got about half the parts printed. Ill definitely share. I shared my xwing and the 3mf on your comments section there too. Thanks for your awesome website!

[@eltiodemo]

You (or yours) is a genius, congratulations my friend, greetings from Argentina!!

[@realdan3d]

Another amazing model! ;) Going straight to the basket!

[@fab365_official]

Please enjoy to print~

[@raffia16thblaze10]

yeah im most definitely modding mine for resin printing so i can eliminate all gaps and get a really lovely painted model.

[@TastierBackInThe80s]

Well done. The way the parts interlock at various points, very well done!

[@destinyangel5]

Amazing , back in 1977 the Star Wars studio prop builders could only dream of this main stream tech of 2020's as they had to search through the hundreds of Tamiya kits .

[@darthkek1953]

Honestly it probably helped creativity to have to do that.

[@TheSirBlackbird]

Ce Star Destroyer est magnifique comme tous vos modéles. ;)

[@pixisdesigns761]

Amazing attention to detail!

[@fab365_official]

Thanks for watching and comment~

[@primejee]

Oh My God!!! 멋지기도 하고 정말 커서 웅장합니다.

[@fab365_official]

지돌파워님, 감사합니다~ ^^

[@presidentskroob522]

This is amazing! Im going to make a pink one

[@fab365_official]

Pink???😅

[@AOtarolaR]

I am making mine with a silver filament! can´t wait...! (what kind of glue are you using on the video?)

[@mebenn15]

WOW, just wow, I can't wait to buy this file and print out a small fleet.

[@fab365_official]

Thank you~ Please enjoy~~~ You will like~

[@rayhi5918]

It's free on their website.

[@mebenn15]

@@rayhi5918 when u first sign up to his site, you get 1 free download. Afterwards u pay. I'm subbed to him already

[@frankmmiii]

BEAUTIFULLY DONE!

[@fab365_official]

Thank you! Please enjoy~

[@red6151]

Mis felicitaciones por el diseño, es francamente espectacular. Un trabajo brillante.

[@fab365_official]

Thanks for watching and comment. Please enjoy~

[@채수윤-k4g]

엄청난 작품이네요!!!

[@fab365_official]

감사합니다~ 다른 영상도 시청해주시면 더 감사하겠습니다~ ^^

[@h45e]

Led lights would be amazing

[@SkinnyTrini04]

I've printed the Razor Crest and AT-AT. I can't wait to print this one 🍺

[@somewhereinagalaxyfarfaraway]

I can only dream of being able to print such things when I get one to do it

[@dc37009]

FYI, Early models had individual fiber optic threads laboriously fitted to the interior, later it was deemed more efficient to drill out the lit areas, and use an interior bulb as a bank light source ! ~liked ~subed ; )

[@OaMaaM1775]

Amazing work.

[@fab365_official]

Thanks for watching! Please enjoy~

[@justinrhoads2199]

@Fab365 I tried using Silk filament and it kinda came out crappy. So what filament did you use for yours? Cuz your Star Destroyer came out amazing in your video.

[@voltran86]

massive work!

[@fab365_official]

Thanks for watching! Please enjoy~

[@davepastern]

pretty nice quality! Looks larger than 1/4500 scale to my eyes.

[@ohcrazydiamond]

Amazing job congrats!

[@fab365_official]

Thank you very much! Please enjoy~

[@benbot5173]

Well now I know what I’d try making if I had a 3D printer XD awesome work!

[@MrDonovanbedford]

WOW!!! Just WOW...

[@fab365_official]

Thanks for watching and comment!!! Please enjoy~

[@ConnorGray]

what printer is this and what is the material? Looks fantastic

[@fab365_official]

I used various printers, like Prusa MK3, MK4, Ender 3 S1, etc...

[@justinrhoads2199]

​@fab365_official I tried using Silk filament and it kinda came out crappy. So what filament did you use for yours? Cuz your Star Destroyer came out amazing in your video.

[@danholzer4626]

how in the hell do you do it!? Very minimal layer lines and stringing! beautiful and amazing!

[@legiomortis8043]

Wtf! Wow amazing work dude, subscribed 👏👏

[@fab365_official]

Wow! Thanks for subscribing! Please enjoy my videos!

[@hassanlichtel2407]

Damn!!! THIS ist your f*** masterpiece!❤

[@fab365_official]

😅😅😅 Thanks for watching and tough comment!!! But please enjoy smoothly~ 😝

[@ozriderone]

I love this! Just wondering what filament was used? I've been after a grey in that shade for ages.

[@fab365_official]

I used right grey PLA.

[@PlasmaPhi]

We need the Star Forge next!

[@fab365_official]

Could you ask or vote on my request page please? fab365.net/requests Thank you~

[@ascensionindustries9631]

Bravo. Well done sir. Doo want!

[@goforitpainting]

Really cool. 👍

[@fab365_official]

Thanks for watching! Please enjoy~

[@ryankorte8601]

Very cool! But no supports needed?? I saw very few to trim off.

[@fab365_official]

No supports needed. Please enjoy~

[@robertlemoux1263]

Amazing!!!! What is the reference of the glue please?

[@fab365_official]

I use this glue~ www.shop.fab365.net/loctite

[@robertlemoux1263]

@@fab365_official Thanks

[@hterra2706]

Free STL's? Subscribed!

[@fab365_official]

Yes. Please enjoy~

[@Flecoide]

es increíble! felicitaciones!

[@fab365_official]

Thanks for watching and comment~

[@312Forrest]

Beautiful model. What are its dimensions after assembly?

[@fab365_official]

After full assembly Size= X 238mm, Y 362mm, Z 114mm For more information, Please check item link.

[@312Forrest]

@@fab365_official Thx

[@SkinnyTrini04]

Amazing. What's the length of it? Whatever it is, must....print....BIGGER

[@JuergenHoppe1]

That's the first thing I looked: how big can I scale it on my printer. 😁

[@dhmsimons]

wonderful work.. what material did you use? PLA? ABS?

[@fab365_official]

I use PLA. Always.

[@henrysanchez4810]

Love it, it's a big one.

[@fab365_official]

Thanks for watching~ Please enjoy big one~

[@TernaryTrout]

What kind of glue do you use when it's needed ? Is it just normal Cyano-Acrylate superglue ?

[@jamesamy1963]

are you going to do a Battlestar, Babylon 5 or stargate ships?

[@TheNeilmcintyre]

Looks amazing! Can the prints be scaled in slicer easily? If the build plat is 230, how big could this be printed?

[@TheSilverwolf97]

This looks amazing. Which material is best to print it and not lose the detailing ?

[@fab365_official]

Light grey is good for this design.

[@conduct623]

That was Awesome.

[@fab365_official]

Thanks for watching and comment! Please enjoy~

[@patricks7982]

Very nice job ; What glue are you using ? Thanks a lot

[@fab365_official]

I use this glue. www.shop.fab365.net/loctite

[@danbrown586]

The detail and the assembly process are both impressive. What was the adhesive you were using?

[@distractedgeek]

He uses brush Loctite super glue.

[@Debunked421]

I mean has anyone talked about how dialed in that printer is? I been printing a long time and this has to be one of the best looking print jobs I have seen.

[@chrisjones1798]

All I can think to say is outfuckinstanding workmanship 👏👏👏👏👏👏👏👏👏👏👏

[@fab365_official]

😅😅😅

[@hakunamatata324]

No stand?? Opportunity missed 😢 Solid work, thanks for making it available.

[@fab365_official]

Stand is coming soon!

[@TheRealStructurer]

Nice model but hard to grasp the size. How big is it? How did you design it? Thanks for sharing 👍🏼

[@jasoncombs3232]

RING THAT BELL BOYS!!!

[@fab365_official]

😁😁😁

[@MegaPointman]

Awesome Man!

[@fab365_official]

Thank you for watching and comment! Please enjoy~

[@SyncOnglet]

Awesome model and print ! I love the filament used, what is the brand and color ? thank you

[@fab365_official]

I used right grey from colorfabb.

[@SyncOnglet]

Thank you 👍

[@ResurrectedBrush]

How in the heck is that printed so clean?? I'm not seeing layer lines and the details look crispy enough to be resin! Are optimal settings included with the STL files?

[@fab365_official]

I wrote on setting that linked page. Please check~

[@rbnzdave]

its at 0.1mm. and theres so much detail it masks a lot of it.

[@eddiexx]

Great Thanks Fab! Is there a possibility you could share the actual workfile obj or so? So we could add details but still use this as a base? it would be truly fantastic. Cheers

[@rvalius]

Очень круто получилось.

[@fab365_official]

Thanks~ 😁😁😁

[@jamesamy1963]

Love the model the only thing I don't like that can be done differently and this is with all printed models is the guns along the side they need to be actual turrets not a print

[@mavericktrinidad9242]

Finally my favorite pizza shaped space ship

[@alexandrucore]

Amazing design ! one question what type of glue do you use ? :)

[@fab365_official]

Thanks~ I use this glue. www.shop.fab365.net/loctite

[@mr.szkielkokoko9322]

what is the filament color?, is some gray or white? Please some info color and producent.

[@fab365_official]

Filament color is light grey.

[@whatnow2131]

Sorry for the noob question. I haven't even bought a printer yet. Would the flashforge adventurer 5m be able to print something this big?

[@dankron_]

Thats incredible! What colour filament is that?

[@fab365_official]

Thank you~ I used right grey pla filament.

[@Dragon_Werks]

Is this @ the same size as the old MPC/AMT kit? How difficult would it be to modify the design to reflect the Tector class Star Destroyer? It has no big hangar because it carries no fighters, landing craft, dropships. It also has @ double the number of guns. It's a pure battleship. I'd need separately molded gun turrets, and a LOT of them, plus extra deflector shield domes to build my modified version.

[@TheChitakus]

I already use my free ticket on the shuttle! is this available to buy soon?

[@mpw1986]

What about a space 1999 eagle?

[@tonbopro]

Amazing

[@fab365_official]

Thank you! Cheers!

[@wdethoma]

Hello. What instant glue did you use? Just built your model, did not come out as well. The tolerance are super tight. Managed with some sandpaper, but it is a awesome build.

[@fab365_official]

I use this glue. www.shop.fab365.net/loctite Please check~

[@rbnzdave]

Is super cool. So how are you dealing with copyright selling models of copyrighted works on your site ?

[@justinrhoads2199]

Any difference between Silk and PLA filaments?

[@adelmosilva3331]

Hello, I would like to know what color and filament you used to print the star destroyer, thank you very much!

[@AntiKipKay]

It's free?? Oh man so gonna make one. I'll add holes and extra cavities to install lights and fiberoptics.

[@fab365_official]

I expect your lights installing work. Please enjoy~

[@mikezimmerman9547]

you could put light blue LEDs in the thrust nozzles with cotton ball overlays for a thrust effect? Anyone know better ways to do that?

[@damixch7428]

How to have the same print quality as you?? I get curious every time I watch your videos

[@fab365_official]

In youtube, there are my ways to improve print quality. I always watching print issue videos~

[@damixch7428]

@@fab365_official I can't find it, could you give me a link?

[@homelander1974]

뽑아보고 싶은데 여력이 안되네요...ㅠ.ㅠ 멋진 작품 잘 보고 갑니다~

[@fab365_official]

웬만한 3D 프린터에서는 대부분 프린트할 수 있도록 디자인했습니다. ^^

[@christopherkovacic3713]

Does the brush become hard over time?

[@DarrenGerbrandt]

Very cool. Does the Locktite Super Glue haze over? I've found the superglues/crazyglues that I've tried have a nasty tendency to leave a white haze on prints and I had to switch to B-7000 glue which works great but it would be nice to be able to use a super glue at times.

[@MRgrimlock84]

I have had good luck with Bob Smith Industries super gold plus super glue. It doesn't haze on clear styrene parts and I believe it's foam safe as well.

[@Manuparis]

@@MRgrimlock84 is it the glue you use with the paintbrush ?

[@MRgrimlock84]

@Manuparis no it comes in a standard super glue bottle. I have used old paint brushes and tooth picks to apply it though.

[@leegoodman11]

Apologies in advance if this is a dumb question. I'm new to 3d printing and was wondering, can this be printed on a resin 3d printer or is it just for filament ??

[@bradleyj.fortner2203]

This is a little out of left field. But, hear me out. I own a 1973 Honda motorcycle. On it's sides, it has two plastic covers to hide the battery and air filter. They're painted the same color as the gas tank and lots of old bikes had them. The ones for my bike are getting really hard to find. Even used. If you can figure out how to print plastic motorcycle parts, you could make a small fortune. Even the dirty, scuffed and cracked ones are pulling in approximately $80 bucks each.

[@distractedgeek]

Can you share the overall length of the build after completion please?

[@fab365_official]

It is written at the bottom of the description. Please read the article carefully. Thank you!

[@happymanx0]

Where do you get that glue you use and what's it called?

[@Chaosek]

How are you getting such quality of print on fdm..

[@fab365_official]

I clean and change nozzle very often. And I print very slow.

[@justinrhoads2199]

​@fab365_official Like how slow exactly?

[@tomsedragon]

wow.. just wow :-D did you print in ABS?

[@fab365_official]

I always use PLA. Thanks~

[@tomsedragon]

@@fab365_official Thanks for answering. I would have thought it was ABS with all the hooks needing to be flexible.. even more impressed :-)

[@OZtwo]

Are you using nail polish as the glue?

[@bardock_revenge]

qual é sua impressora? as peças sao muitos boas

[@fab365_official]

I used various 3D printers. Prusa mk3 and mk4, ender 3 pro and S1 etc…