How can we remove the Disney Logo on the back? LOL!!!
@Warrior8bit4 жыл бұрын
Do you think the chemicals of the lighter fluid can damage the card over time? Have you ever tried the hair dryer method?
@jumpinjimflash4 жыл бұрын
I've used lighter fluid on the blister too. Apply to one side, top and bottom and "hinge" the blister open.
@shadowgb4 жыл бұрын
youre saying you don't have to cut the blister open????
@pandaboxCollectibles4 жыл бұрын
@@shadowgb yes that worked for me too.
@jumpinjimflash4 жыл бұрын
@@shadowgb Correctomundo.
@hw25774 жыл бұрын
@@shadowgb Yep. Look at the bottom of the blister where there's a small opening between the card and blister -- start by squirting some lighter fluid between the two, and gently work your way up (squirting the fluid and carefully splitting the blister from the card). On the Last Jedi and SOLO cards, squirt the fluid along the left side where the blister meets the card, and start from there.
@billpagan30704 жыл бұрын
You sir are a Jedi when it comes to fixing toys😁
@manko88524 жыл бұрын
A hairdryer might soften the glue on the blister if you do it carefully.
@aboutthemetal87834 жыл бұрын
OK ,I was wrong you didn't just use a hairdryer, but please try the hairdryer method ad its excellent.
@mikemacdee63904 жыл бұрын
Geez, the EU can't even do action figures right.
@jdh67523 жыл бұрын
@Toy Polloi Do brands of lighter fluid make a difference? I can only seem to find Clipper brand locally. I assume it's lighter fluid - It says "Fluid. Excellent for cleaning" on the tin.
@toypolloi3 жыл бұрын
I've used many over the years and they all seem to work the same. But do a test first to make sure. Cheers
@elcroz4 жыл бұрын
Good video as always, perhaps a video on how to paint/ink over the faux aging around the side of the cards. It’s something I have thought about but wouldn’t want to mess up. Thank you.
@OnlyOneKenobi4 жыл бұрын
You did that well! I have a spare wave, so I might do it (remove sticker) Dunno if I'm gonna go as far as remove leaflet as I don't wanna breach the bubble, but great vid! 💙👌🏻 O.O.K
@ParkerLewis4114 жыл бұрын
Mineral Turpentine works too.
@jon95504 жыл бұрын
If you soak the card around the blister with acetone, the blister will just pop off the card. You can then remove the warning sheet and then glue the card back on using some glue stick.
@darthsmoker420Ай бұрын
I did this with the 2nd wave. Works really well
@filipematias51272 жыл бұрын
drugstore chloredric ether also works very well
@darrenfoleymusic33364 жыл бұрын
I use UN-DU adhesive remover for stickers. Even on 50 + year old lithograph. It safely neutralizes the sticker adhesive long enough for removal, and the sticker can be re used after if desired.
@impossiblepie3 жыл бұрын
Has anyone tired Goo Gone on these types of stickers?
@edmontonstormtrooper24933 жыл бұрын
Looks so much better!
@ZeroIkarus4 жыл бұрын
In the past, i used a blow dryer to heat up the stickers a bit, it was easier to peel them off afterwards, but lighter fluid seems to work so well!!!!!
@Eccles_Hall3 жыл бұрын
Want to remove the retro sticker off a Boba Fett (always liked the ESB card for him) however a portion of the sticker is underneath the blister 😫
@toypolloi3 жыл бұрын
That's interesting, but annoying. So they put the sticker on before mounting the figure on the card. Weird.
@greenlanternhg51414 жыл бұрын
Nice! I’ve tried the lighter fluid and it works great
@calumryan63284 жыл бұрын
Did they put the leaflet under the feet in the second wave? Here in Canada it’s folded up under my boba fetts feet
@toypolloi4 жыл бұрын
I hope so. I've yet to get my order of wave two.
@wildbill18352 жыл бұрын
This did not work for me at all. I don’t know if the lighter fluid is different or what but the sticker didn’t come off clean
@toypolloi2 жыл бұрын
Did you put lots on and let it soak for a while?
@danielferstendig Жыл бұрын
Did u know the hasbro ghostbusters toys have paper work?
@toypolloi Жыл бұрын
All modern toys seem to have it. Part of the legal requirements I guess.
@hotrodney964 Жыл бұрын
Brilliant sir, literally just tried this and it worked perfectly! I honestly had no idea it could do that especially on such large stickers.
@Transfixed4 жыл бұрын
What a shame to put that sticker right on top of the wonderful photography. They at least could have put a smaller one near the top. Thanks for the fix!
@ManCave19723 жыл бұрын
The ghastly mass of EU regulations that everyone ignores anyway is a blight on these figures
@gibbie80s614 жыл бұрын
Interesting. I got mine from Darkside Toys, which is a UK online distributor. They all had the sticker, which I removed, but none have the leaflet in the bubble. I guess I got lucky ordering from them.
@squirrelkilla73714 жыл бұрын
Use the lighter fluid to release the bubble on one side and then take a clear drying glue for archival paper and seal it back up. I've done this with Hot Wheels cars that have popped open and they seal perfectly. Will it needs to be archival so that it never yellows.
@carlostrevino82484 жыл бұрын
Newly subscribed to the channel. you've seen the videos and you've done a great job. Congratulations greetings from Mexicali, Baja California in Mexico.
@stonecold61004 жыл бұрын
Hey toy polloi have you seen the super Mario brothers movie There’s a character named GOOMBA and his cape is impossible to fine could you make one for us?
@tomheckhaus76174 жыл бұрын
The lighter fluid has Naphtha which dissolves glue quite nicely. Rubber Cement thinner (Bestine) does the job very well as well. Vapors can be harmful. A very thin knife blade will lift the blister and then a thin coat of stranded white glue puts it and any paper back in place and is not noticeable.
@TeZXSpectrum4 жыл бұрын
White wine is also good for removing stickers if you have run out of lighter fluid and yes it tastes better too!
@stevelewin82414 жыл бұрын
Thanks for the tip already taken 2 stickers off look so much better on display...
@Villordsutch4 жыл бұрын
Would the Lighter Fluid method work on book covers too? I only ask as I buy a few from charity shops and they have the frustrating habit of slapping a huge sticker across the front cover.
@toypolloi4 жыл бұрын
It should work fine. Do a quick test on one to check.
@simonfarrell65854 жыл бұрын
Great vid, will do this to my set. I also have security tags on the back of mine, those I know will rip the card if I try and remove them
@garym63154 жыл бұрын
Glad to hear that's a sticker - I thought it was part of the paint-job. These are great figures but I hate that they give them that distressed look. You can get original cards that look better than that
@NitrousDiecast4 жыл бұрын
I think the lighter fluid will lift up the glue on the figures shell too, so you don’t have to cut it. People use lighter fluid on hot wheels packages to take the car out
@tristanhowden41054 жыл бұрын
Great idea. I actually bought double of each to have loose and carded. Whoever thought to do that with the pamphlet is a real Einstein knowing the vast majority of people who would buy these are the long term fans. Great solution.
@ManCave19724 жыл бұрын
Love a lighter fluid episode!👍🏻
@leokirschner85252 жыл бұрын
Just wanted to leave a comment that this video inspired me to go out and buy these newer carded Star Wars figures. The lighter fluid works like a charm and I have these carded figures displayed in my home office, and I'm wanting to get more toys from my childhood. As a result, it has inspired my college-aged sons to go out and buy similar collectibles figures to display. It's now something I share with them, comparing my original and retro figures with their newer releases. Sorry to see you're getting some awful criticism online about what you do. Just wanted to let you know my kids and I appreciate your work! Keep the videos coming!
@toypolloi2 жыл бұрын
Thanks Leo. Glad you have got so much out of my videos. That's great to hear.
@brianartillery4 жыл бұрын
The information leaflet, which I could probably guarantee nobody has ever read. I never have, and I save them as kindling to light barbecues with. I've opened my figures, but hated the huge sticker, the faux damage on the card, and the flimsiness of those cards. I still have my original 'Palitoy' cards, and compared to the new ones, they're really butch and stubborn. Oh, and the 'big head' Han Solo. There's a nice Bespin Han Solo head waiting for him. You can use acetone on a cotton bud, to loosen the glue on the blister. It always used to work, unless the glue formulation has been changed.
@jdh67523 жыл бұрын
Acetone strips the print from the card.
@PropNerd4 жыл бұрын
I saw a video on a different channel about how easy it is to fake "factory error" Hot Wheels cars as "mint on card" by soaking acetone through the back of the card to the blister to loosen the glue without damaging anything, modifying the car, and then gluing it all back together. I don't know if it works on all prints but the video I saw did it to a few dozen cars of various ages to show how easy it is (and to not trust people selling "factory error" cars because it is way too easy to fake them).
@jdh67523 жыл бұрын
Acetone will strip the print from the cards.
@TheAtariCreep4 жыл бұрын
Couldn't agree more that these should be played with!!!! All my friends are keeping their figs on card but removed the sticker. I cant help but think a MOC WITH the sticker could become an expensive collectable in the future. lol
@TheAtariCreep4 жыл бұрын
@ENDZEIT DE in his review video I made a comment saying I super glued the blaster to the Storm Troopers hand. He holds it well now.
@Thehumblecollectoruk4 жыл бұрын
Words to me ears to open and play with
@NitrousDiecast4 жыл бұрын
Forgot to mention, this was a great blast from the past as it were, as I had the original figures when I was a kid
@palpatine19754 жыл бұрын
Hi Dave, this has been very helpful as always. Thank you
@edgark24544 жыл бұрын
Would removing the sticker affect getting a higher AFA Grade?
@toypolloi4 жыл бұрын
🤣
@Beedo_Sookcool4 жыл бұрын
That looks much better! Do you have any techniques for removing bubbles without damaging the card underneath, perchance?
@Beedo_Sookcool4 жыл бұрын
@@One-Eyed-Willys-Rich-Stuff I tried that once, and it didn't work, so I have been loath to try it again. Is there a specific trick to it?
@freddie1991d4 жыл бұрын
Thanms for these vieeos on the retro figures! Awesome videos! Here in the US we have a product called Goo Gone, it's a citrus based sticker remover, I wonder if that would work as well, if you don't have or want to buy Lighter fluid?
@triple7gaming4 жыл бұрын
M P I’ve used goo gone and it’s not as good as lighter fluid. Soaks into the card and leaves a water damaged like effect on it.
@gamerid65074 жыл бұрын
i like retro n vintage toys
@stardust95044 жыл бұрын
2:34 tweezer maybe?
@r.davidhill76394 жыл бұрын
Nice job Dave. 👏👏👏
@brianm63374 жыл бұрын
Hasbro is a piece of work. I know no one will believe me, but they pretty much stole my idea for Beast Wars transformers.
@TypicalTonk4 жыл бұрын
Would some acetone on the back of the card allow you to lift one edge of the blister? I know glossy cards can be trickier when it comes to acetone. Also, that leaflet is just one more reason why the UK needs to leave the EU.
@Gumba2134 жыл бұрын
don't use acetone, it will destroy the inks
@TypicalTonk4 жыл бұрын
Gumba 213 I’ve used acetone on cards before to remove blisters. No ink damage. You can also run a line of acetone on the front of the card along the edge of the blister side you want to lift. If careful, and you angle the card so the acetone runs away from the inside of the blister it can be done. Patience is needed.
@BeardedViking4 жыл бұрын
After the sticker is removed, do you still see some discoloration on the card where the sticker was located? Like it left it's mark. :)
@toypolloi4 жыл бұрын
No, you wouldn't even know it had been there.
@BeardedViking4 жыл бұрын
@@toypolloi Immediately after I removed the sticker using lighter fluid, there was a "shadow" of where the sticker used to be. Maybe it's more noticeable on the Tarkin card because the location of the sticker is in a black/dark gray area. Also, you can only see is at certain angles, not straight on. Thanks for the reply.
@BeardedViking4 жыл бұрын
So the dark spot disappeared! I did the rest of wave 1 and 2 and they look fantastic!
@cuda70gt74 жыл бұрын
i wounder if a black marker would delete the fake aging on the edges?
@rumblehat43574 жыл бұрын
cuda70gt I don't have any of these retro figs, but I have seen people do the black marker trick with old black border baseball cards. Perhaps if I one used a light touch and then rubbed the ink with their finger right away to smooth it out?
@cuda70gt74 жыл бұрын
@@rumblehat4357 could work, worth a shot
@eltenda4 жыл бұрын
Great ! Does it work with price tags?
@toypolloi4 жыл бұрын
It does indeed.
@eltenda4 жыл бұрын
@@toypolloi thanks!
@katabellioniguess3 жыл бұрын
Doesn’t this decrease the value
@parky23104 жыл бұрын
Run lighter fluid on the back of the card where the blister is - then you are able to remove the blister and figure but you can also reattach the blister back to the card if you wish.👍👍👍👍
@samuelrivera45424 жыл бұрын
That's a good trick with the lighter fluid. But, it doesn't work with the glue on the bubble? P.S. another reason to leave the E.U.
@korydoe72014 жыл бұрын
Yes, action figures are for play, glad to hear someone say it out loud! Keep up the good work Dave
@aboutthemetal87834 жыл бұрын
Soak lighter fluid into the back of the card where the bubble attaches do it several times until it soaked through the card into the glue that holds the bubble on , Then once it gets through you can pull the bubble off without any damage then re attach once you have removed the leaflet, Your welcome😀
@camerontaylor62424 жыл бұрын
about the Metal what’s best to re attach the bubble with? I have a couple retro collection pre ordered from the ESB line and plan on removing the sticker and leaflet, will be following this video in regards to the sticker and following your instructions in regards to removing the leaflet, just wondering what would be the best way to reattach the bubble? Thanks