[Star Wars] SNOWSPEEDER EP03 : BANDAI 1/48 Scale Plastic Model Kit

[ Plastic Model Kit ]
BANDAI 1/48 Scale Plastic Model Kit
Modified Incom T-47 Airspeeder : SNOWSPEEDER
Star Wars : Episode V The Empire Strikes Back
[ Tools ]
TAMIYA Cement (no resin)
3M Masking Tape
GSI Creos Mr. Masking Sol R
GSI Creos Mr. Mark Softer
GSI Creos Procon Boy Wa Platinum PS-269 (0.3mm)
Harder & Steenbeck Infinity CR plus (0.15mm)
OZ/MAHA Finish Master PMA-100
DEERFOS Sandpaper #400 / #600 / #800
Hand Drill Bit 0.4mm
LOCTITE 401
HIQ PARTS Carving Guide Tape 6mm
SUJIBORIDO BMC Carving Chisel 0.2mm
HASEGAWA TL-11 Rivet Scriber
[ Materials ]
TRUMPETER Brass Pipe 0.6 / 1.3 / 1.5 / 1.8mm
Brass Wire 0.3 / 1.2mm
Plastic Plate 1.5mm (polystyrene)
TAMIYA Plastic Pipe 3mm
TAMIYA Plastic Round Bar 2mm
PLASTRUCT Styrene Strip 90725 (0.5mm x 2.5mm)
PLASTRUCT Styrene Square Rod 90720 (0.5mm)
PLASTRUCT Styrene Round Rod 90852 (0.6mm)
Junk Parts from 1/35 Military Kit
Cheap Wooden Frame from Ornament Shop
[ Paints ]
GSI Creos Mr. Surfacer 1200 Gray
GSI Creos Mr. Primer Surfacer 1000 Gray
GSI Creos Mr. Finishing Surfacer 1500 Black
GSI Creos Mr. Weathering Color Solvent
GSI Creos Mr. Weathering Color Multi Gray
GSI Creos Mr. Color 002 Gloss Black
GSI Creos Mr. Color 029 Hull Red
GSI Creos GX100 Super Clear III Gloss
GSI Creos GX113 Super Clear III Flat
IPP 030 Racing White
IPP 044 German Gray
GAIANOTES 031 Ultimate White
GAIANOTES 071 Neutral Gray I
GAIANOTES 072 Neutral Gray II
GAIANOTES 073 Neutral Gray III
TAMIYA Acrylic Paint X-8 Lemon Yellow
TAMIYA Acrylic Paint XF-1 Flat Black
TAMIYA Acrylic Paint XF-8 Flat Blue
TAMIYA Acrylic Paint XF-66 Light Grey
TAMIYA Enamel X-1 Black
TAMIYA Enamel X-7 Red
TAMIYA Enamel X-11 Chrome Silver
TAMIYA Enamel XF-16 Flat Aluminum
TAMIYA Enamel XF-63 German Grey
TAMIYA Panel Line Accent Color Black
A. MIG Oilbrusher 3501 White
A. MIG Oilbrusher 3515 Ochre
A. MIG Oilbrusher 3517 Buff
A. MIG Streaking Brusher 1251 Cold Dirty Grey
A. MIG Streaking Brusher 1252 Red Brown
A. MIG Streaking Brusher 1258 Streaking Dust
A. MIG 1004 Light Rust Wash
A. MIG 1203 Streaking Grime
A. MIG 1204 Streaking Rust Effects
A. MIG 1407 Engine Grime
A. MIG 1409 Fuel Stains
CANAL Enamel Thinner
CANAL Lacquer Thinner
Hair Spray
Wood Stain : Mahogany
Wood Varnish : Gloss
[ Time Table ]
00:09 Canopy A
04:07 Canopy B
06:00 Engine
06:46 Aileron
08:33 Machine Gun
09:36 Weathering
10:45 Base
[ BGM ]
Grut
Get Back
Long Road
The Big Beat 80s

[@terrynicholls2975]

Good grief. That’s a beautiful bit of work.

[@onthezero]

Thank you! XD

[@MrPhife333]

Absolutely one of the sexiest videos I've ever seen. Zero, you're brilliant!

[@ArnaudMEURET]

That is ILM level. 🏅

[@billyconnor8386]

That is superb. I have learnt a lot from your videos. Thank you for making them.

[@paolocapecchi5182]

Spectacular job. Thank you for sharing.

[@onthezero]

Thanks! XD

[@christianrodrigues7571]

Un montage et une mise en peinture de toute beauté.. Un travail magnifique et si plaisant à voir en image.. Bravo et félicitations pour ces trois vidéos.. Un plaisir visuel... Merci...

[@onthezero]

Thank you! XD

[@eugenenolan3040]

Just brilliant. Very well done. Your own extra details and base made it stand out.

[@KarlViksnins]

OMG. Just stumbled onto your site. Really beautiful work. I cannot find the OZ/MAHA Finish Master PMA-100 anywhere in the US. Any links?

[@tristanlee8495]

I have a couple questions, 1. Do you actively go to every extreme you can with adding extra detail like the canopy piston system and redesigning gun on the back to push yourself as far as your talents allow? 2. I’m intrigued as to why you use enamel, what’s the reason? Because I’ve always been told that it’s better to work with acrylic and finally I’m just wondering whether you’ve got another Gigas video in the pipeline because that project was what got me hooked on your channel and I really want to see where it was going? Again thank you for showing us mere mortals your superb model making skills.

[@onthezero]

1. First of all, I don't know if I have a talent, I just think I'm doing what I can. For example, that piston is easy to make and give effective details, and the canopy of this kit was designed so simply that I just didn't like it. I think the most important thing when I deal with this hobby is not to dream of extreme perfection like that of great artist, but to think how much I enjoyed making model. Of course, I run this channel hoping to convey that joy to you watching my videos, but it's another difficult task. haha. 2. There's no big reason. It's a little bit of a habit. I'd like to try different paints and tests, but I'm a little lazy. XD Where I live, lacquer and enamel are still sold the most. the number of acrylic paint shops has been increasing in recent years, so I'm also interested. and many of my friends around me are recommending acrylic. But I'm still LAZY. :( 3. GIGAS project is still going on, but I've been a little busy with other things in recent months and haven't made much progress. The part I'm working on these days is adding details on legs, which is necessary, but it's quite boring, so the progress is especially slow. I will try to edit quickly and show to you when the video is ready. Maybe you're wondering why this guy's leaving GIGAS and working on another project, haha. I hope you understand it is quite boring for me to continue making only one model and it was necessary for me to proceed with other projects to get new inspiration. Thank you for your interest in my work and for waiting. Since I'm not familiar with English, I hope the intention of what I'm trying to say is well communicated to you.

[@tristanlee8495]

@@onthezero Not a problem waiting is part of the fun and honestly you're one of the best Model KZbinrs out there just due to the sheer amount of detail you put in your videos, not just due to the skill you have at making them but the other little things like how you show the material you're using in the top corner. And I totally get needing to work on multiple things me and my dad currently have about 7 projects going between the two of us haha.

[@onthezero]

7 projects.. XD

[@sholva6809]

Can I ask what grain sandpaper you used cause I got a couple of models coming an x wing and a snowspeeder with a AT ST. NVM I read the description.

[@davidcottam7967]

Need some advice on this model

[@davidcottam7967]

How does the canperie go together

[@onthezero]

Sorry, I don't know what "canperie" means.

[@myopinion3398]

No one likes a show off. Like and sub! 😂