Starke Ignition vs Starke Triple P | NOT THE SAME PRODUCT…

[@zacdaddy-j3w]

If I was to use the triple p on my 2009 malibu wakesetter. Would it help shine up the blue/ white what I think is gel coat? I’m planning on using Gtechniq marine coating base and top. Please let me know what you think🙏🏼

[@zacdaddy-j3w]

There’s tiny bits of oxidation going on but nothing too crazy. I was planning on trying out the triple p with rupes yellow pads on a da!

[@topdockpro]

Triple P can’t handle any sort of oxidation, it has no grit. You should use a polish like Elevate beforehand

[@dublove9405]

Can u explain all starke products please

[@topdockpro]

Possibly, not a bad idea

[@dublove9405]

@@topdockpro also, I broke my Starke quick connect pad the very first time as well. It’s because you’re supposed to pull back on the ring on the back of it for inserting into the pad

[@justinvanbreemen]

Question (I am considering to ceramic coat my boat): If you use Triple P, follow it up with Repel Pro as its base coat and follow it up with Liquid Kraken (Graphene coating), will the graphene coating layer still bind with Repel Pro?

[@topdockpro]

All is good with the Triple P, but Repel Pro twice or Repel Pro as a base & Liquid Thor as a top. I would keep the graphene coating separate from the Sio2. Either go all graphene or all Sio2. Does that help?

[@justinvanbreemen]

@@topdockpro yes thank you!

[@derekbardon]

What do think is a better system: two coats of Repel Pro, OR one coat of Repel Pro + one coat of Thor on top?

[@dublove9405]

So you would always use ignition after elevate? What kind of pad?

[@topdockpro]

Yes and any kind of medium foam pad is perfect. Rupes or Lake Country

[@dublove9405]

Would u always use ignition even on white gel coat? Also do u have a video on how much compound to use. How to not use too much or waste it and how to properly work it?

[@PerryShriver]

i have ranger bassboat with gel coat what should i try first it has fine and light scratches in few area,other than that it is very clean boat. i have all flex buffers.and what type of pads should start with i also have lake country wool pads, and cutting and polishing pads, what starke product should i star with first,

[@topdockpro]

I would start with elevate on a purple foamed wool pad on the Flex 3401 VRG

[@PerryShriver]

thank you

[@derekbardon]

What pads would you use with each product and at what RPM?

[@topdockpro]

Ignition I run the rupes course foam pad at 400-500 rpms on a random orbital polisher. Triple P I run the rupes finishing foam pad at 400 rpms on a random orbital polisher