Start to finish stamped landscape curbing!

Welcome to the channel! This is a brand new channel, subscribe to keep up with our jobs! Thanks for watching!

[@annettepuryear6755]

These are so satisfying to watch. Yall do a very nice clean-up afterwards too!

[@creativecurbing]

Thank you 😊

[@hungmcintosh1009]

I want this done

[@hungmcintosh1009]

I live in wisconsin

[@monicapham805]

You do good job, I never see that before. You are the best

[@creativecurbing]

Thanks!

[@edgarurielguillen1368]

good night, great job

[@creativecurbing]

Thanks!

[@bizshaughnessy9049]

Nice work man!

[@steffen707-]

These look fantastic. What's a per linear foot cost for curb with stamp and stain?

[@mr.b4444]

Great job and very relaxing to watch. I had curbing done last year and they did an overall but covered a few of my sprinklers so I don't really deal with that company anymore. After a year I'm not too crazy about the color. Can the curbing be repainted in a different color and sealed again?

[@creativecurbing]

@@mr.b4444thanks! mix color release with mineral spirits, spray it on, wait for it to dry, then seal with a concrete sealer.

[@mr.b4444]

@@creativecurbing Thanks so much for the quick reply. I'm not so good with a sprayer so I'll have someone do this for me.

[@creativecurbing]

@@mr.b4444 you can get a cheap $10 sprayer at home depot. It doesn't even have to be even. It's very very simple. Trust me, you could do it. Spray on the color. Then spray 50/50 mixed xylene and concrete sealer on it

[@4SeasonsWithMartin]

Sweet!

[@chefbillyx]

You don't need any HPB stone underneath? I live in a cold climate, and I'm worried about heaving. Great work, by the way. What do you charge per foot?

[@stampinsueduffy]

Very informative video - thanks! We are having this done next week in Indiana. We have large mature trees. Have you encountered tree routes in your prep?

[@creativecurbing]

We have, small Roots we cut, big roots we do not. It's a large tree just make sure you're giving it plenty of space.

[@te01guy]

Nice work, I have seen those continuous curb machines around, that is a very attractive upgrade. Do they make forms for various profiles? I think I might like something a little lower on the grass side that I could hang the mower deck over. Could always dig it down too.

[@creativecurbing]

Look on Google for "curbing mower edge". We're doing a mower edge job on Wednesday and I'll post the video Thursday.

[@te01guy]

@@creativecurbing Thanks for the speedy reply, will check it out. Looks like you guys are in Texas?? Wish you were local to me here in Washington state. How is this type of work typically priced? Guessing by the foot with up charges for the color and stamping?

[@creativecurbing]

@@te01guy yup. It varies greatly around the country, from $4ft to $15ft.

[@creativecurbing]

Well our mower edge job canceled. As we typically do not do mower, there is no telling when we will get another job doing mower edge. Sorry about that!

[@Logancarnes95]

wanna know pricing, what did you charge for this job

[@AB-uk3tb]

What machine are you using to lay the concrete?

[@SeeItBelieveIt-n6m]

Just wondering if you could suggest how I could do this in a cold weather climate? I know that most of Texas never sees much below freezing temps.

[@creativecurbing]

You can't do it below freezing unfortunately. Up north, they only curb about half the year.

[@kodywillnauer9422]

As a single piece of concrete do you add any rebar or cut points for strength or controlling cracks? I assume the trowel punctures and vertical grooves were enough. Nifty machine.

[@creativecurbing]

You're exactly correct. Every few feet we throw a crack joint in by making a cut in the curb then rolling it. Unfortunately, due to the process, we aren't able to put rebar, but we do add fiber mesh to every load.

[@kodywillnauer9422]

@@creativecurbing Very cool. It's always impressive to learn and see people doing what they love by making it a career. Great job and wish you continued success!

[@lynnstuckey9087]

how deep is the crack joint? just wondering....@@creativecurbing

[@creativecurbing]

@@lynnstuckey9087 3/4 of the way through.

[@gavygv1267]

Donde compraste la bomba para aplicar sealer

[@seansimms2791]

We are charging around 10$ a foot in Myrtle beach SC.. is that comporable?

[@creativecurbing]

Yup. Our competition charges around that. We're a little higher.

[@tdmytriw]

What did you roll onto the concrete for colour there before the sealer

[@creativecurbing]

@@tdmytriw color release

[@ProCustomRoofing]

Where do you put the drains on the curbing? Wont it hold water like a pool if there is no drainage cut into the curb?

[@creativecurbing]

If they have (or plan to) put gutters in, we don't put drains. I do bring it up with all of our clients and they get to decide

[@thegreatcomback5952]

About how many feet from that mix

[@brianstarr9871]

Couold pour a concrete base and let it extend away from the bed to keep weeds from and turf from growing next to the curb?

[@creativecurbing]

Yes, we could do that.

[@ceylankucukhas8075]

Whats the dusty material rolled on the top? Is that what it giving the dark color?

[@creativecurbing]

It's called color release!

[@ceylankucukhas8075]

I'm planning to do it on my home in Ohio, would you give me he exact mix of concrete material and fiber mesh so I don't mess up?

[@creativecurbing]

7 buckets of sand, 94lbs of Portland type I/II cement, 16oz integral color, a handful of fiber, and water.

[@rogersmith5849]

What’s the sealer you sprayed on it?

[@creativecurbing]

Eagle supreme cut 50/50 with xylene

[@edgarurielguillen1368]

I have a question I live in the state of Colorado where can I buy the roller for the design

[@creativecurbing]

Borderline has them for sale. But they are expensive. Your best bet is eBay

[@chapinatx5023]

How long will last without cracking

[@creativecurbing]

It will eventually crack at the joint lines. That's why we put them in, just like a sidewalk or driveway. By putting the joints in, it makes the crack less noticable. We have curbing that has been put down for 15 years that still looks great

[@resnickgarcia5307]

Where are you living? And what area are you working?

[@creativecurbing]

Austin tx

[@resnickgarcia5307]

Can I have your phone number?​@@creativecurbing

[@jellymatt4187]

How much does this normally cost

[@creativecurbing]

Usually around $15ft

[@flokibabic4955]

how much was this job?

[@creativecurbing]

I can't recall the exact bid, but it varies widely around the country on the price per foot

[@RobertDean-x5e]

If you can recommend someone in Pittsburgh I’ll take a recommendation.

[@creativecurbing]

I'm not personally familiar with this curber, but check out edgeappeal.com/

[@LandscapingOrtiz]

How much per square foot

[@creativecurbing]

It varies widely around the country from $10-$25ft