Starting Our Ultimate $8000 Dual Watercooling System

[@UFDTech]

► Today's Sponsor: Keep safe while buying on the internet: privacy.com/UFD for $5 off your first purchase with them. ► Big thanks to EKWB for sponsoring the watercooling parts: www.ekwb.com/ ► Big thanks to Wootware for sponsoring the PC parts: www.wootware.co.za/ ► iFixIt & Their Tools: ifixit.com/UFDTech

[@theilluminati1554]

congratulations first comment

[@Gamba16374]

rtx titan ??

[@brokenlava518]

Isn't there a slim 120mm fan on the Scythe Big Shuriken 2?

[@l9rche757]

Why not use a 3950X?

[@UFDTech]

@@l9rche757 Because they're not out til September?

[@wing0zero]

Ohhhh gonna need a triple water setup to make red, green and blue. When Intel release a GPU Nvidia need to release a CPU, triple system!!!

[@wing0zero]

@Vaibhav Hariani Man that stuff is more expensive than rainbow paint though.

[@dapz]

nvidia does kinda make CPUs, but they are ARM based.

[@Jupiter__001_]

@@dapz The Tegra line is Nvidia, no?

[@dapz]

@@Jupiter__001_ yes

[@Fishmonger1922]

I love the aesthetic of this build with team blue, green and red. I hope you do put in another reservoir and maybe have team green as smaller horizontal mount and go for a translucent dye.

[@TrippyRexTech]

this is a great idea

[@benjaminargus9563]

Looking forward to seeing this complete

[@notthedroidsyourelookingfo4026]

This build looks really great!

[@shaneduc]

I would flip the bottom radiator over so your coming down into and up out back to the reservoir/pump. I would on the AMD loop go into the top of the reservoir/pump, and use the inlet as a low point drain. This is just my opinion. You do and make great content thanks.

[@Chemy.]

Ok, just starting and looks like a futuristic factory

[@chloedevereaux1801]

fans on front.... get a 120 res mount put on front rad...... mount bottom 240 on it's side at the front similar to jays skunk works..... simples :D also no clearance for inlet on res nearest gpu so get 2x dual inlet tops for res's and bring infeed down from top

[@itsdeonlol]

This system is gonna be EPIC AF!!!

[@dionparkinson3477]

hey Brett, you didnt mention anything about the front radiator in your loop layout? small oversight? i would suggest flipping the radiator in the front and go straight from the amd cpu to the radiator in the bottom then to the radeon 7 then to the front radiator then to the pump.

[@chrisneill1245]

Wife's question to me "Why do I always watch these video's" with my response of no one knows. Its just so great to look at. Cant wait for the CPU to see this going. I am waiting for that video

[@HamzaElgarrab]

the verge approves

[@depth386]

I have an R7 on water too and yeah I could not believe the weight, Sag-tastic. My horoscope even changed to SAGittarius

[@Johnny641]

Looking good, maybe some fishing line on the Radeon to help with the sag.

[@mukulmanghani8255]

my favourite tech channel along with ltt

[@Arandolor]

Wish they would start selling Cryorig locally in RSA The H7 and C7 have some pretty good price to performance I've been told

[@perrrry]

zip ties and zag. Do yourself the favour of no shortcuts. Love the build and channel :)

[@peterpain6625]

Hot glue! He should use more hotglue ... and glitter and a disco ball ;) Or glitter-hotglue ;)

[@jakubvitalis3215]

just turn the 280 radiator so the tubing holes are facing up and it will be much simpler

[@holzvonobi1851]

I build my CPU (w3680 @4.4ghz 6core)watercooling from 12$ gpucooler a 3$ pump some tubes fo 2$ and a 5 Liter can of destilled Water 1$, no radiator ;-), and its working very well below 60 degrees Celsius, before i had 100 degrees with air @3.7ghz.

[@madscientist6843]

Did you actually include the 560mm rad in any of the loops...or did I miss it? I saw the 480 and the 240mm rads, but not the 560mm....

[@UFDTech]

I forgot to discuss in the loop scheme, but it's physically present. 😁 That will be for the thermonuclear reactor setup of the 9900K & 2080 Ti.

[@madscientist6843]

@@UFDTech Cool mate, I saw it, but yeah...you didnt discuss it. You should turn the 560mm around so the connectors are at the bottom where they need to be

[@brandonhowes5364]

I want to see the reservoir tubes changed out for the 250 X3 ones, it would look better

[@hi_tech_reptiles]

I'd still use a 5700XT, looks and performs better all things considered IMHO. It edges out the RVII in a game or two, and is just.... better. Only thing the VII has is compute performance seems to me, at least price / performance. It's almost like that's why they didn't release the 5800 or whatever the next highest rDNA GPU will be.

[@alexwong-s7s]

Can I know what CPU block was used on the asus z390-i?

[@gorazdnovsak3705]

You need 3 pumps. Read, blue and green... you have 3 radiators...

[@wing0zero]

The Intel CPU is behind the GPU and you can't see it, so you could cheat and just have a blue res filled.

[@gorazdnovsak3705]

@@wing0zero What about tubes?

[@Stefan.Stefanov]

This big case doesn't look very big once you install all pc parts :D Good luck!

[@gavinxm]

you have the bottom radiator blowing hot air over the card that it is removing the heat from, might as well just air cool it.

[@Tomnician]

The reason you cannot route fan cables is because you shouldn't put fans there. That is not a Phantek issue that is a you issue.

[@richm77]

you will need two drains as you have two loops im not sure if any one else has mentioned it yet.

[@Totokuma]

The GPU riser cable will go between the riser cable holder and the GPU. It won't sag when you have the riser cable installed :). I'm also waiting for my 3900x, it's honestly so annoying. It was available for a week after launch and I bought it day one, yet they still ship it out to those who bought it after me. I gotta wait until July 19th for it to be available and probably July 23rd will be the date it finally ships to me ^^ btw. team Red, Green, and Blue RGB lol. they are all connected, conspiracy lols

[@rodneycrouse4575]

Custom building is always biatch even if you are a KZbinr. 😁 if KZbin would let me upload my core p90 build that's halfway done but still looks awesome. I would do it just so you could commiserate

[@andreassheriff]

We need a build outtake. lol I'm sure the system didn't just come together without angst and some blood.

[@a.ffirmative]

Why arent there any dual full atx cases

[@andrewmccrocklin2312]

Can you mount the 120 exhaust on the outside?

[@Hero1117a]

Could you list your watercooling info?

[@jwilliams703]

Um cant you flip the 120 rad over and route the pipes that way? instead of going down and left and up.. that seems silly.

[@majesticgoatgaming5608]

That thermal paste on the radeon 7 might become an issue

[@paulg8394]

Corsair 1000d would be better Fans blowing cool air up and out. The radiator will just heat up the bottom gpu

[@UFDTech]

Phanteks & Wootware sponsored the Enthoo Elite, so I'm not complaining. Also, rethinking the 240's positioning. Will make sure it's not blowing on the GPU.

[@creepercharge1277]

Ufd tech 8 pack Made a PC using the same case water cool just go to KZbin and search up 8 pack $30,000 the radiator configuration is pretty good

[@Iinustechtips]

Hey guys this is Austin

[@christoskaragiannis7973]

-8k pc -no cable combs

[@Cardcitysports]

Was cringing the whole time looking at it. The system is not ready to go lol. Gets some combs and some zip ties in this beast. Color combo looks cool though!

[@UFDTech]

Waiting to actual put the cable combs in until the entire thing is ready. No point in managing something when it's going to be torn apart again

[@Pingolinou]

Questions: Why are you making this build? Whats the point? Why haven't you mentioned the front radiator? There are 3 radiators, one really fat one top, middle thickness long front, middle thickness short bottom. So which one is going to get two and another one only one? Why don't you install 2 rads at the bottom facing out towards you (similar to what jay2cent has?) Why have you went with such a large motherboard for the AMD when AMD is def a far harder overlocker than intel? I would have seriously went the opposite in your build. Mind you I haven't checked if there are any new mini amd boards.........wait if not? I am still very curious as to why you are making this........1 cpu 7 editors from linus made sense....are you going to set up some sort of ultra mad system where editors can call/switch between the two machines instantly on demand and send their workload to one cpu, and another to another cpu? Weird.

[@masterthodyu]

What ever happened to also putting the ps4 in there?

[@Tomnician]

Don't put the fans in the front, shouldn't have to explain that...

[@matejboras9279]

If you remove nvidia and intel it is just an 1000$ build

[@NubsParrotSwagLord]

give me it

[@petrkisselev5085]

I doubt YOU weigh more than 60 to 70 kg. Even with all those components inside, your build shouldn't exceed 20 to 30 kg.

[@UFDTech]

The case is 45kg by itself.

[@petrkisselev5085]

@@UFDTech HOLY $#!+ What is it made of? Tungsten? o0

[@uoga101]

I really want to custom loop the new buind that im gonna have but that should be a good freakin 500-600€ more i suppose... :/

[@Sechs0rBecks]

Yeah custom watercooling is freaking expensive. I'm in the same boat. Bykski or Barrow got some good stuff for watercooling, too. It's less expensive, but not very easy to get by, only aliexpress and some other chinese importeurs.

[@dragonbuu1788]

Hi

[@MrAudi220]

Why does this feel like a waste of money?😅

[@kokomisorbet]

epic

[@Cheekyst]

Amd sucks for graphics card my gosh stop ass pumping navi. Amd is good for cpus that’s fair but not gpu

[@jcvanwyk1867]

You wire need work

[@guily6669]

8000$ on that crap? jeez are they made of gold? with that price you can even buy an industrial pump a few car radiators and even put pressure to the point where the whole PC case go Kaboom lol...

[@ckolla6505]

f

[@stephenwoods74]

First comment woo hoo

[@slickjim861]

An 8k computer and you dont bother w phase change? Water cooling is good and all but you are limited by the unpressurized water that is horrible at getting rid of heat without change of state. But great ar picking it up so you with end up thermal throttling after a few hours >< .

[@jimsinnovations2737]

This sux