Starting the Bodywork on the S10

[@Anthony-fc1zb]

Nice work bro! Aye a nice way to get them studs off after you're done with em is with a vice grip or pliers. Snatch em from the base and twist and they pop right off no holes or extra stuff to grind off.

[@sideshow45]

This^^^

[@ronmiller1162]

a complete bare metal project should always have a thin coat of etch primer before you epoxy prime then high build primer or surface primer and my tip for today is always go back and forth with color on your layers ; so your etch primer will mostly be transparent green gray then go red or black epoxy primer then go to gray surfacer primer then of course white top coat i do it this way so you always can see if you have complete coverage try to end up with gray before top coat because it has the best coverage ability with any color of top coat and i always re sealer prime wet on wet before top coat i know its alot but trust me i painted for a lot of years this is how i paint my own cars and how i would paint your car too

[@TheModAddict]

Also if the stud pops off clean you can re use them. We used to get 3-4 uses out of them. You can use a pair of wire cutters to get them off clean.

[@darxxtuff]

good idea, to hit the s10 for the EKs down time. definitely gonna be good to see it start taking shape. plus we know that's what you'd like to focus 100% on lol.

[@JGcynicDC2]

I love this channel. Thank you for taking us along for the ride. I appreciate everything that you do and the knowledge that you share. I always look forward to new content. Keep up the great work my brother. Hopefully someday I could paint my DC on my own. Thanks again.

[@niall7546]

I knew that rust protection spary wouldn't have stopped the rust. Same thing happened to me

[@El_jefe_562]

Now I know why we are running low on water.. all the pressure washing you do 😂😂

[@michaelkowalski2931]

That's definitely going to be a game changer for the S10 and all the builds to come. Love the progress Brother 🤛

[@jeremyhearn8941]

I like how you work that slide hammer!

[@devilsmurf2285]

presure washer is the best part of the videos

[@robwoodz3155]

Yes back to the Honda content !! As promised

[@bloodblk3580]

Yessir them s10 vids hit

[@SoulPurposeGarage]

You did a great job with the pin welder.. Many people pull too hard and have to fill in a bunch of tiny holes, Keep it up man!

[@true2this]

Use a set of vice grips and twist the studs off..it’s a lot quicker than grinding them down

[@mikebanks6704]

I been hoping to see this s10 awhile now and also hype af about the 55 chevy build that's gonna be a sick one.

[@shanewhite4227]

Yes s10 mini truck content

[@J_Money714]

Sweeet can't wait to see the S10 come together it's gonna be sick with the plans you have for it

[@gusplymale1797]

If you use a pair of plyers to grab and twist the head of the stud it'll come off the car easily, and you can sometimes reuse the studs a few times.

[@Ondamon375]

5:27 time to get back to work on the "dont want it to be perfect" truck lol

[@poonjaber1122]

I guess I’m tuning back in

[@Jabsz_EK]

R33 purple would be sick on the S10

[@chrisdovenbarger4329]

I can’t wait to see the S10 I know your going to make it look good

[@davesinger1517]

Can use a pair of Dykes and grab on the knob closest to the sheet metal on the dog that you aren't on there and you can gently twisted side to side and I'll snap off as long as you didn't weld them into deep

[@LENINsWORLD]

Josh is a real homie tho for doing the "running outta gas walk of shame" with you 😆

[@peopleschampgarage7869]

you should start hoarding civic eg's and selling shells to the Midwest and east coast

[@dookiedave5375]

Chulouwoop Just an idea clear coat the tailgate leave it as is Awesome hustle

[@allana5930]

And you can use them for shrinking. and go across the dent so you don't make more work for your self.

[@Lord_Abacus_01011]

All content is good content to me bro, I'm slowly working on my 99 LX CR-V fwd.. I got rims off a 06 Acura TL that I have been working on winter sucked so stopped working on them but I'm back to work on them this weekend there going to be painted gloss white...

[@bryanmoring4298]

If you barely weld the studs on you can twist them off and reuse them a few times 👌

[@nathanaaron5860]

Nice work you do

[@dalepolak5248]

Hell yeah.. S10 luv!

[@gee_medina9035]

I have one of these tools and it works but also be careful cause it can burn throw the metal

[@tommoon2700]

Love it homie, all your rides are goals!

[@davesinger1517]

So that one looks like it's working way better than the one I got from Harbor freight just like you lucked out bro lol

[@yoofaceee514]

Ur supposed to pull those lil things off with ur puller just give it a good pull there meant to come off it’ll leave a cleaner surface

[@sublime12201]

I have that's stud welder... I love it

[@sloppycscustoms2725]

🤙🍕Ha, I call it wally world too. Much love from Surprise bro! 🤙🍕

[@onepunch9485]

Flake it out bro on the paint.

[@The_Redkween]

When the Suburban died, the whole #dbfam was like, “it’s the fuel pump!”

[@lookin_litt5483]

Make the s10 a tow truck lol that will be dope af 🔥🔥

[@A1rB0rN.]

I kinda loving the rust look make it look more meaner…. That just my thought but I would leave rust like that on my truck then sprry primer

[@nathanaaron5860]

Mines is 89 s10 2.8 in the garage like a baby in a crib

[@haroldguillaume9006]

Hey love the videos hope all is well. I really think you should think about doing a build for time attack. I know you would have a blast with time attack.

[@tommoon2700]

YASSSSS twisties is where the fun is!

[@hisnherintegra7440]

That tool is forkin awsome. Finally got my merch and I'm loving it. Keep up the awsome content.#dreamsdontworkunlessyoudo

[@streetmeann]

the truck would be sick all murdered out, also less visibility for 12 yk so just think about it

[@jairocortes3046]

Brooo you should just do a patina S10 and drop all your money into suspension and engine TWIN TURBO LS you're gonna need horsepower and suspension for Cash day runs. Big UpS to yourself. bro.

[@jairocortes3046]

PS I'm writing this has I'm watching the video lol

[@cartersbuild8531]

Love the videos man

[@boricuaaaaa1]

The s10 look like the hatchback

[@mastercricket7626]

shiiiii bro that lil thing is rad af i think i need one them bro hell yeah .....peace n love brotha keep it rad stay safe n build on famz l8z #DBFamStrong

[@skellagher]

Clear it just as is… jam the ls and a huge turbo in it and enjoy a rat rod kinda quality

[@lunchboxjoeb]

sounds like a fuel pump

[@DeepakDeepak-dn6qb]

Candy red s10 would be fwoking dwope

[@kriptaknight8162]

Yeahy yeahy

[@0zWaldKuozjiee]

You should paint the truck the same color as kakki

[@jonathanellis9880]

Yessir

[@joseherrera9743]

Money well spend.

[@whyOyouTEEuBEEe]

Bothers the SHIT out of me that you don’t have the wand on the pressure washer and just the handle with the tip on it, love your show tho bro

[@turejdmzcdohc1433]

Hell yeah can't wait to see it done it's going to be badass it'd be badass too if it was like Two-Face from Batman one part white one part black but hell yeah brother man keep it going love the content keep up the great work and don't forget f*** the neighbors 🤙😁🥳🥳🥳🥳😂😅🤣👍👍👍🥳

[@allfamilyimportanddomestic8508]

How did you set up that spray Booth been needing a spray Booth been thinking about a canvas tent or renting a garage and doing a similar set up would you know the cost difference between canvas and a garage also like the s10 it's turning out nice

[@christiangutierrez83]

I think you can cut those out with dykes or side cutters

[@markusthath1455]

I could see you putting a turbo LS swap 🤔🤔

[@kennethporst4359]

I WANT wanna of these old Fords...I use to have one 99% stock 4 years ago and I Loved it....my goal is do a Whole Custom truck with it...5.2L magnum engine (from the 90's Dodge 1500's) twin turbo 9' rear end you know you know

[@Otsp922]

Do another giveaway on the s10. See the business opportunity like Braven does with his car flipping. 😂

[@Kapil-Patel]

Not buying that $80 bed was a blessing in disguise.

[@zacharyprosper88]

Bought Time lol

[@nathanaaron5860]

Keep it up. I'm 👀.

[@rustyridesgarage672]

Work the dents from the outside to the inside of the dent and you could use a pair of dikes to cut off the studs that way you can reuse some

[@yungBitta291]

Should have used a heat gun to warm it up to pull it easily try it next time

[@antisocialvr6]

👍

[@TheREALOC1972]

I just moved from the Mainland to Hawaii 3 months ago to work for a luxury/exoctic car dealership running their parts warehouse and I had to buy something quick so I bought a 86 S-10, it's nothing special but I'm well on my way to making it a good looker. It was original Silver but someone repainted it Blue sometime in the mid-90's and it looks like crap so I have to repaint it so I'm going sand it all the way down and change the color, The new color is going to be 2024 BMW Sunset Orange Metallic, why? first Orange is my favorite color and I got a SMOKING deal on the paint, I bought a gallon of it that had a fenders worth of paint taken out it for $25 from the body shop, I will have to pay for the reducer and hardener but being an employee I pay dealership cost. The interior is Grey and other than the seat being trashed and I went to a junk yard here this weekend and bought a set of Grey bucket seats out of a 08 Toyota Camry for $100, they aren't the EXACT same Grey color but IDC. The only I really don't like are the wheels, they are the stock wheels off mid 90's S-10, which I suspect were put on when it was repainted, but I'm going to keep them on for now and eventually I'll change them out for some Enkie 72's after i get some money back in the bank.

[@Scoobems]

You should paint it a flat color, gun metal gray flat

[@251_Performance]

Maybe it's the fuel pump?

[@randisimo]

I thought the same thing lol

[@FR11]

#DBFAM

[@yungBitta291]

Paint it crystal moon

[@wilfreddiazvellon7896]

Your mistake for not buying that truck bed for $80 pull your hair for that,next time when opportunity knocks on your door open those doors bro.Any how keep up the good work and your videos.

[@jorgenavarro6827]

Rat Rod build

[@mikerivers4179]

Should have just cleared the rust and went for the rat rod look with red rims and white walls

[@mikebanks6704]

That ductless blasting worked mad good wish I knew about that when doing my 97 hatch that woulda made it a breeze

[@JohnMurrell-ce2yc]

Can I get your decal for my truck?

[@blackcanyongarage]

What you doing at my Harbor Freight!?

[@Fackler91]

Just light the whole tree on fire.

[@john591]

Helloooo my name is ninooooooo

[@kennethporst4359]

Was up Nino im blow smoke 🏒

[@DeepakDeepak-dn6qb]

The wrong thing that you did was not picking up the 80$ bed

[@joseherrera9743]

New shirt logo. Lower your standards bro!

[@REALSHYT666]

Dear gawd Bromigo plz 🙏 Don't paint it white. it's such ah boring 😴 color. Maybe ah metallic Rootbeer brown or something 🤔 idk. just that there's Soo many white S10's in the damn world lol 😆.

[@TRIP5_GAMING]

Bro... Just sand it .. Paint it ... And dont worry baout the dents and shit . its gonna be a street beast u wanna take to no preps and shit ... Who gives a fuck how it looks bro!

[@meanpaintandbody]

Dont cut the studs use pliers and they fall off clean the tip and re use it