8 TOOLS I should have bought sooner \\ Beginner WOODWORKING tips

  Рет қаралды 437,523

Start Making (Woodworking)

Start Making (Woodworking)

Күн бұрын

Пікірлер: 864
@startmaking1
@startmaking1 Жыл бұрын
Let me know if there are any other tools you can't live without. Thank you for watching.
@archer9338
@archer9338 Жыл бұрын
3M has a cheaper disc in that series called the 310W. I just price checked the U.S. link and the 310W are approximately $0.30 compared to the 710W that are approximately $0.46
@MrKarlPrince
@MrKarlPrince Жыл бұрын
Thanks for the video, certainly intend to take up some of your suggestions (centered drill and pencil). My extra suggestion is if using the 3M extract mesh discs you also need to invest in "pad savers" to protect the hooks on the sander, the Bosch Professional Pad Savers seem cheapest for 125mm sanders like our Makita's
@BobBlarneystone
@BobBlarneystone Жыл бұрын
A high quality 4 or 6 inch combination square. And let me tell you a tip about Incra rules - a utility knife blade fits nicely in the slots to scribe a crisp line. Just be careful to draw carefully and keep the blade from cutting the Incra rule.
@maciej9280
@maciej9280 Жыл бұрын
@@BobBlarneystone seccond that, i bught cheap "square set" from Lidl few years back, only a cuple of cuts later found out they were far from square :/
@frederickwood9116
@frederickwood9116 Жыл бұрын
-An adequately accurate sliding bevel. One that is not too expensive but not one that will go out of square too easy. Must be cared for though. - And a builder’s square (90 and 45) as it’s more robust and very reliable. - a carpenters marking knife. Again not too expensive. - reading glasses 🤓. Don’t get caught trying to guess. Magnify if it helps.
@BrianReese-v8q
@BrianReese-v8q Жыл бұрын
Your comments on haters and gatekeepers, and your reluctance to be pushy about like and subscribe earned you my likes and subscription.
@startmaking1
@startmaking1 Жыл бұрын
That is very kind and a comment that gives me faith that I am doing it as right as I can. Thank you
@maggew
@maggew 7 ай бұрын
It’s true and normally I don’t buy into the flowers and rainbows but it really makes sense for topic.
@GSCt1000
@GSCt1000 3 ай бұрын
I'll second this comment. Keep the hipster wood workers at arms length. Wood working is not a big willy competition. It's a simple practical problem solving task.
@jeffsimon4563
@jeffsimon4563 Ай бұрын
@@GSCt1000 ML, Ml L.ll Llll Ll L L Lll ,.ll L L L. ll. L ,!,!,''',!'
@jeffsimon4563
@jeffsimon4563 Ай бұрын
@@GSCt1000,''',!',!!,''''''!'!!?'!,!!!''!!,!,!'!,''''''''''!!!!,''''!!,m!'!'!,,'!'M''!''''''''''''''!!''!!'''''!!,!,!'''''!!,''''!'!''''!''!''''''''''!,!!,!'',
@HighCalibreFilms
@HighCalibreFilms 3 ай бұрын
I’ve been watching Malecki, 731, blacktail, Lincoln street, fix this build that, four eyes furniture, Paul Sellers, Rex and I love all those guys … but finding you and hearing your encouragement and authentic self has been awesome. Makes me less afraid to start small and make little steps. Love the wholesome content mate. Great stuff
@startmaking1
@startmaking1 3 ай бұрын
Wow, they are some of my favourite channels. Some that I watched well before I started out. Thank you.
@davidpetraitis
@davidpetraitis 4 ай бұрын
Thank you for the rant on woodworking is whatever you are wanting to create with wood. A great and positive message.
@startmaking1
@startmaking1 4 ай бұрын
I do like a good rant. Thank you too.
@leonardbutler9338
@leonardbutler9338 Жыл бұрын
Hi. I have been woodworking over 40 years yet I only recently bought a quality shop apron! I am still getting used to it but there's no doubt I should have bought one years ago. I selectively fill the pockets with essential and frequently used tools: pencils, tape measure, 4 inch Starrett square, 6 inch ruler, etc. No longer am I at the table saw and need my tape measure only to see it sitting on my workbench! p.s. A quality apron will have flaps on horizontal pockets! Otherwise they fill with sawdust.
@startmaking1
@startmaking1 Жыл бұрын
Hi Leonard. Thank you for watching and for commenting. I may have to bite the bullet soon and get one. How you choose though, I have no idea. It would be nice to have the most used tools so close to hand , though I suspect in my tiny shed where everything is approximately an arms length away it is less necessary. Still, if it stops that 10 minute moment staring at the wall unable to find what is right in front of me . then it would be priceless.
@seanallard3659
@seanallard3659 Жыл бұрын
Leonard i also just starting to use a shop apron. other than the fun my wife makes about me, its great.
@Dave5843-d9m
@Dave5843-d9m Жыл бұрын
I am the worlds worst at dabbing a tool down somewhere and losing it. It’s incredibly annoying. Overalls help. A well designed apron should be better.
@leonardbutler9338
@leonardbutler9338 Жыл бұрын
FYI, if you have the means and fancy it, you can have a custom leather apron made for over $500! I have seen KZbin reviews of such aprons made by a company called Leather by Dragonfly. I bought a quality waxed apron (Eco-Zen) with sufficient pockets, designated spot for pencils, a metal clip for a tape measure, etc. I recommend shoulder straps versus tie-around- the neck.
@nicksmith1415
@nicksmith1415 Жыл бұрын
I was discussing this very thing. I'd like a decent leather apron. I do have the experience enough to make one but I'd have to buy leather working tools and sew it by hand. Or I can just buy a good quality apron
@CedomirMr
@CedomirMr 7 ай бұрын
Excellent. To the point, no bull, no theatre and honest. Keep it up!
@startmaking1
@startmaking1 7 ай бұрын
Thank you. Thats really kind.
@TheWhitetailrancher
@TheWhitetailrancher Жыл бұрын
The single and very best part of this entire video is the proper titling. I am more impressed than I can actually state. the Proper use of the simple word "I" which is normally stated as "You" or even "everyone". cannot be overstated! Kudos to the creator of the video! Having enough balls to simply use the word "I"!!!
@startmaking1
@startmaking1 Жыл бұрын
Hi. Wow, what a great comment. I really didn't know people took that much time over the titles etc. Means a lot that you have taken the time to write a nice comment and one about something I do think about. Much appreciated.
@TheWhitetailrancher
@TheWhitetailrancher Жыл бұрын
@@startmaking1 You are so very welcome, words mean a lot! I sure wish more folks understood that. You do VERY WELL and I appreciate it, obviously!
@startmaking1
@startmaking1 Жыл бұрын
@@TheWhitetailrancher Thank you kindly. Much appreciated.
@theofarmmanager267
@theofarmmanager267 Жыл бұрын
Anything which tries to desmystify woodworking and open it up to beginners is great with me. I’ve been woodworking for over 45 years both for fun and as a business. Clearly, when I started, there were no power tools for the smaller shop and everything was done by hand. But we did it. It took longer and took more physical effort but we made very good things. I’m very glad that we now have great adhesives and much better abrasives (I used dog fish skin as sand paper). Despite having a large workshop full of expensive tools, there are few things that I couldn’t be without. I’d prefer to have my table saw, band saw, router, morticer, lathe, thicknesser, jointer, 3 phase extractor, pocket hole machine, both dominos, track saw plus…………but I could live without them albeit, at my age, I can’t perform the most physically exerting tasks anymore. Don’t spend a fortune but spend well. Take chisels: second hand chisels can be very cheap but also can be incredibly chipped, very blunt and made of old softer steel. If you can find a decent set of Marples or Stanley which look like they were well maintained, then give a go. If you can’t find second hand, then there is no need to go for The very expensive sets. Go middle of the road and you might not need better ever. I’ve tried all these expensive pencils and just come back to the old fashioned kind - 2H for accurate marking; 2B for writing on the timber (eg. Left hand top) and a white pencil for writing on darker Timbers such as walnut. About £5 for 20 pencils - but if you like the feel of an expensive pencil, then treat yourself - it is supposed to be fun. Learn skills not how to spend lots of money. Learn how to measure properly; how to saw straight; how to sharpen planes and chisels just using a simple honing guide, a piece of leather as a strop and a diamond sharpening stone (400/1000 grit combo is fine), how to chisel properly, how to plane with something like a No.4 or 5. Then get experience by making simple things first as nothing is more likely to put you off woodworking if you try and make that dining table first time and it doesn’t go well. Small bookcases, picture frames, shelf units will all be really useful and you will learn loads without mistakes costing a fortune. Lastly, buy decent timber. I know that YT has these channels taking pallets and turning them into masterpieces. The reality for a newbie is that the work required to turn pieces of unknown timber from a pallet into something useful is too much. Go and buy from your local woodyard (unlikely to be the rubbish in most big sheds) and get some small pieces of decent oak, ash, chestnut and make something.
@startmaking1
@startmaking1 Жыл бұрын
Hi Theo. What an amazing comment. I don't think I have had one this detailed and well thought out for a long time. You `are spot on too. I have followed a lot of your advice over the past 2 years. I love my no4 and no5 Stanleys, took me a long time to get them tuned up and to sharpen the irons. And I use exactly what you say, diamond stones, nothing expensive, the honing guide and a strop. Still a way to go but that is the fun. I don't have a lot of the larger power tools, if any depending on what you class as large. I just don't have the space but I am very much looking forward to getting to the stage where I feel that to progress I can justify them. I am in awe of those of you who learnt your skills on the hand tools, I watch a lot of Paul Sellers and am amazed at what can be done with hand tools. For many reason the effort to build solely with hand tools is also not possible for me for larger builds, I just don't have the energy to do it. But you can't beat the feel of a hand tool carving through the wood fibres in my opinion. I have just bought what I class as 2 expensive chisels and so far am not blown away. They are good but like you said if you can find used chisels with a decent quality steel then they will serve you perfectly. And in all truth a cheap set can also be just as good if you are only a weekend woodworker in my opinion. I have a few for £3 each and what they taught me was how to sharpen as they dulled so much quicker so I was never short of practise. As for wood, I learnt my lesson early with moving pine, partly my naivety and not allowing for the movement but also poor quality wood. Not a fan of the pallets, especially without a thicknesser at the very least. Nothing comes for free, the effort is huge. I order most of my timber , especially hard wood, already milled and that seems to help a lot at the moment. Same as everything, as the skills improve so can the wood. Thank you again for such a great message and please don't hesitate to share your experience in any of the other videos or direct to my email. Much appreciated.
@Cenedd
@Cenedd Жыл бұрын
Just one thing to note. The old Marples chisels (I have a few from the 70's) are great. Good steel and well ground. The newer ones (the red and yellow handles to be specific) are going to need so much grinding to make them useable, that you'll likely leave them on a shelf. The modern Stanleys are probably not a patch on the old but they're at least not a million miles off the right geometry. Narex seem to be very well respected at entry-level but I can't speak from personal experience.
@davidpetraitis
@davidpetraitis 4 ай бұрын
Thank you for this long comment, and sharing your experience. I am 74 and beginning woodworking with small projects for the house.
@tigloki
@tigloki Жыл бұрын
Great video! Thanks! I subscribed. On pocket holes vs "real joinery" - When I started out, I wanted to be a joinery master. I learned about all the different ways I could do it. Then I realized, as I was looking at antique furniture to see how craftsmen made things that are still in use 100 years later, pocket holes aren't new! "Traditional joinery" is awesome and looks beautiful! But when a pocket hole could be hidden, and the use case was appropriate, old-school craftsmen used them too. That discovery led to my first Kreg pocket hole jig, and I love it. I still fancy it up on a joint that is going to be in public view, but if you have to have the thing upside down or if you need a flashlight to find my pocket hole, you can bet there's one there. Quick. Easy. Quality.
@startmaking1
@startmaking1 Жыл бұрын
Thank you so much. You have really nailed it with your comment. Pardon the pun. I agree whole heartedly. Time and place. And thank you for subbing. Appreciate
@ogearbox6132
@ogearbox6132 4 ай бұрын
I have been doing woodworking off and on over decades. Now retired I find your detailed videos quite informative. Thx keep em coming. And the trolls….? If you just ignore them they usually bugger off.
@startmaking1
@startmaking1 4 ай бұрын
Thank you very much. And you are right. We should all ignore the trolls.
@thehastywombat
@thehastywombat Жыл бұрын
Hinges drove me insane until a friend showed me a self-centering drill bit. Absolute MUST have IMO.
@startmaking1
@startmaking1 Жыл бұрын
Absolutely. Hinges have ruined so many boxes for me. Or rather I have ruined them trying to do hinges.
@jamesbarros950
@jamesbarros950 Жыл бұрын
As someone who has taken the time to make proper dove tails and hand cut traditional joinery… I absolutely love pocket hole joinery for the right application.
@startmaking1
@startmaking1 Жыл бұрын
Nice comment. Had me worried for the first sentence.lol
@nickm8494
@nickm8494 2 ай бұрын
Carpenter/Joiner here, I pretty much agree with all of your talking points! I've used the Tracer pencil for a while now - you're right it does grip in the holster a bit too much at first, but with repeated use it wears down and becomes smoother. The Tracer kit I bought recently included a marker pen and a multifunction tool for scribing etc - which is a great idea in principle but a bit of a faff to use. Tools I find very useful (these might not apply to the bench woodworker but it's good to get a real world perspective) : 1. Trend Digital Angle Finder - a bargain for the price; great for calculating mitre cuts and finding rake angles on staircases. 2. Stanley Combination Square - probably the most useful marking and measuring tool a carpenter can own - buy the trade quality yellow one not the flimsy black one. 3. Triton Whetstone Grinder/Stropper - basically a more affordable version of the Tormek. Probably a bit much for a beginner woodworker but if you use chisels and planes in anger as much as I do then this saves a lot of elbow grease! 4. Thorex Nylon Hammer - very useful hammer with replaceable heads of varying hardness. Softer heads for tapping joints together, white head for fitting pvc beading, harder head for use with chisels. 5. Fluke Voltage Detector - Literally a life saver and also useful for fault finding - when kitchen fitting or doing general DIY, tap on a socket or cable and it will light up red and beep if AC is detected. Handy pen style, always tucked in the work-pocket next to the Tracer... 6. Thermos Mug - after many apologies to customers for breaking their nice mugs I now ask them to put the tea in one of these!
@startmaking1
@startmaking1 Ай бұрын
Sorry for the delay in responded. What a lovely and detailed set of suggestions. Thank you. Great info for anyone reading.
@plasticcreations7836
@plasticcreations7836 4 ай бұрын
Great video that will help me if I get back into woodworking. Completely agree with you about not being led by other people. For me with the pencils, a standard clutch pencil works fine. The reason why the lead breaks is that most people extend the lead out too far.
@startmaking1
@startmaking1 4 ай бұрын
You are spot on about the pencils. Thank you for commenting.
@drewmarsham6735
@drewmarsham6735 2 ай бұрын
Hi as someone relatively new to woodworking I love these reviews and opinions. It’s a great idea providing the links so we can look at pricing and other reviewers before buying. Well done keep up the good work
@startmaking1
@startmaking1 2 ай бұрын
Thank you for getting what I am doing. I really appreciate it.
@6panel300
@6panel300 Жыл бұрын
I buy cheap pencils from poundland, they do the job, cheap to replace. As for a holster, it's what ears were invented for ! One of my most used tools is probably my 25ltr compressor, from using it with a blow gun to air nailers, staplers, spray guns and automotive tools it is a godsend. So much so went it packed up I bought a replacement within days. Great video, keep up the good work.
@startmaking1
@startmaking1 Жыл бұрын
lol, I used to use my ears but they are ridiculously under designed for the job. I hear about compressors a lot, they seem so versatile. I am being very disciplined with what I fill the new workshop with. I really want it all but after a table saw, a compressor may be second in front of a band saw and large router table. Thank you for the feedback, appreciated.
@Locane256
@Locane256 Ай бұрын
These are great tips! Thank you for doing this video, I bought most of the stuff you listed here after being frustrated with worse versions of things like the pocket hole jig and center hole drill bits. Cheers! 👍
@startmaking1
@startmaking1 Ай бұрын
Thank you very much for such a nice comment.
@macdelttorres3366
@macdelttorres3366 Жыл бұрын
Thank you for braking things down to my level…. Haven’t worked with wood for over two decades, this is helping me
@startmaking1
@startmaking1 Жыл бұрын
Hi. to be honest I do it because it is around my level too. Enjoy your woodworking. I bet it will be like you never put your tools down.
@michaelwillson6847
@michaelwillson6847 Жыл бұрын
👏👏👏👏 ok ave only got to tool 3 and your rant about pocket holes I'll come back with another one at the end but had to jump in now on this. You are so right. I saw pretty much exactly what u said in another video wee while ago pocket holes used in the right way can be very helpful like u say drawers plywood connection but don't try build say a table base with them. Again back shortly just wanted stick this in the now before forgot. 🏴󠁧󠁢󠁳󠁣󠁴󠁿👍
@startmaking1
@startmaking1 Жыл бұрын
Hey Fella. Thank you, That was a very impromptu rant. I get so cross with people online trolling beginner woodworkers. Don't get me started on the dovetail police. Pocket holes lead me to trying larger projects with confidence and now both my daughters have lovely desks. Could not have done that without them. You are right through, time and place.
@michaelwillson6847
@michaelwillson6847 Жыл бұрын
​@@startmaking1 couldn't agree more. Think was a well done rant though was needed. As u say we can't all know how to cut dove tails or have the tools or skills to do other joinery but we're learning so it's way to go but yea done right.
@zapa1pnt
@zapa1pnt Жыл бұрын
@@startmaking1: Absolutely! There is no right or wrong, only results. If you get the result you want, great. If you don't, then you do it over a different way. Live and learn what works for you. 😁✌🖖
@startmaking1
@startmaking1 Жыл бұрын
@@zapa1pnt agreed
@YTubeSDD
@YTubeSDD Жыл бұрын
Thank you for your rant against gatekeeping.
@startmaking1
@startmaking1 Жыл бұрын
Hi Sean. Thank you for watching and for commenting. In all honesty I should have done it sooner. It has bugged me for a long time but felt the channel was not big enough or established enough to get involved.
@jk_22
@jk_22 Жыл бұрын
Nope, if you weren’t born with the ability to do mortise and tenon joinery and hand cut dovetails, then you have no business even looking at a piece of wood But in all seriousness, thanks for speaking up
@startmaking1
@startmaking1 Жыл бұрын
Haha, love it. Sums up most of the worst people in Facebook woodworking groups.
@danielbackley9301
@danielbackley9301 3 ай бұрын
@@jk_22 I hope that this comment is sarcasm. I too find the gatekeeping that is all too prevalent in most hobbies to be nothing short of counter-productive and discouraging. Far too many beginners give up on the hobbies and crafts because of the constant criticism that far too often is unnecessary and even worse unwarranted. After all we all started out making mistakes and then learning from them
@aaronwinter447
@aaronwinter447 3 ай бұрын
Ive reviewed construction millwork for 15 years. When doing 200+ kitchen/bath units in a condo development, anywhere a pocket hole works without being a structural issue and will be hidden: a pocket hole is used. Lots and lots of hidden pocket holes without issues.
@startmaking1
@startmaking1 3 ай бұрын
Thank you.
@andrewmcnary2287
@andrewmcnary2287 8 күн бұрын
I like and subscribe to every woodworker I come across. Thank you for making this video!
@startmaking1
@startmaking1 8 күн бұрын
That's a lovely way to support the community. Thank you
@joshwalty9408
@joshwalty9408 Жыл бұрын
Pocket hole joinery - The "Dry Pour Cement" of Woodworking. 😆 Thanks for a great video! Love the advice and the positivity. Much appreciated. Now off to get a Kreg pocket hole jig.... 😀
@startmaking1
@startmaking1 Жыл бұрын
Very true. Thank you for the nice comment.
@Ojja78
@Ojja78 12 күн бұрын
Pocket holes are an amazing joinery technique. It's incredibly strong and that's what's important in practical woodworking.
@startmaking1
@startmaking1 9 күн бұрын
100% agree
@ThatLadKev
@ThatLadKev 3 ай бұрын
11:56 I've used the Trend Pocket hole jig for years now and found it to be excellent. More value than the Kreg which I've always been turned off because of the use of plastic. I've ever used it beyond it's stated use (on 2x4s in the jig and larger pieces by separating the pieces and using an a freehand/clamped tool)
@startmaking1
@startmaking1 3 ай бұрын
Thank you.
@stephencapewell2900
@stephencapewell2900 Ай бұрын
Nice video well presented with constructive observations Very helpful. Thank you
@startmaking1
@startmaking1 Ай бұрын
Thank you very much Stephen.
@ScarletEyeMoon
@ScarletEyeMoon Жыл бұрын
Thank you for showing me this, I love the self centering bits, I didn't even know there was such a thing, I could have used this a billion times.
@startmaking1
@startmaking1 Жыл бұрын
Hi Bron. This was me not so long ago. The cheap ones are ok in a pinch for once every 6 months or so use. but for regular I would go for the pricier ones. The engineering is night and day different.
@ScarletEyeMoon
@ScarletEyeMoon Жыл бұрын
@@startmaking1 Thank you, yeah I am definitely going for the bosch ones
@royalt9863
@royalt9863 Жыл бұрын
How have I not found this channel sooner? Really quality stuff!
@startmaking1
@startmaking1 Жыл бұрын
Good to have you here now. Thank you
@ReferenceFidelityComponents
@ReferenceFidelityComponents Жыл бұрын
Iron on edge banding I’ve always found unsatisfactory. Now I cut thin strips of wood more like architectural veneer of a decent thickness and bond in place using fine panel pins to hold whilst gluing. Japanese pull saws are fantastic to use. The ones with a firm spine are especially good for jointing. Flush cut versions are invaluable and general cross cut ones cut very rapidly. I have a small collection of them. Sharpening stones are vital. Don’t skimp. Most useful are the double sided diamond stones. You need to do spend £30 to £40 for a good one and remember to use honing solution which prolongs the life of a stone and prevents overheating of blade tip which can ruin an edge. Forget pencils for fine work. Buy a marking knife and use templates or workpieces themselves as joiner rods for exact marking out. Pencils are a rough and ready solution and I mostly use traditional carpenters pencils. Set squares….quality doesn’t have to cost but make sure they are square as many are not! Electric panel nailers (21 gauge) I find useful but nothing decent is cheap. Spotnails are good but expect to pay about £200. Money well spent. Quarter inch routers are the way to go unless you need a heavy duty one. Buy dewalt or makita. They just last, are well made and both makes offer a combi pack for trimming and with a plunge router base. Excellent tools. I could go on but won’t. Just sufficient to say think hard about how regularly use a tool or will need to, buy quality every time remembering it doesn’t need always to be the most expensive.
@startmaking1
@startmaking1 Жыл бұрын
Great comment, thank you. Love to hear from people with experience who dont mind taking the time to give some good, solid feedback .
@katimetsaots6087
@katimetsaots6087 11 ай бұрын
I can't remember in which video you recommended the self-centering drill bits for hinges, but I so want to thank you for it! I could not find these in my small town, but my friend found them in a bigger town and even got a set for himself. Kind regards from a beginner woodworker in Estonia, you make a difference with your knacks! And I'm so happy about your new workshop.
@startmaking1
@startmaking1 11 ай бұрын
Oh, you are very welcome. And thank you for reaching out from Estonia. I saw your email by the way and I will reply I promise.
@donscottvansandt4139
@donscottvansandt4139 3 ай бұрын
Awesome info! I've got a couple what I hope are going to be expensive shadow boxes built except for the henges . This is what I need to finish them.
@startmaking1
@startmaking1 3 ай бұрын
Thats great news. Thank you for the comment.
@MrImmers
@MrImmers Жыл бұрын
I hate pocket holes... But your section on pocket holes is spot on, it is the reason I subscribed.❤
@startmaking1
@startmaking1 Жыл бұрын
Thank you so much. Glad to have you aboard
@Fishingwithdave2024
@Fishingwithdave2024 Жыл бұрын
Been looking at the pica and all the others. Thanks to you ik what way I'm going. Pica for the win
@startmaking1
@startmaking1 Жыл бұрын
I love mine. Have just bought the propelling version.
@HermannKerr
@HermannKerr 11 ай бұрын
I have rectangular sheets of sandpaper. Now for hand sanding that is the way to go and for quarter sheet sanders (ya that is what I have). I have an random orbital sander so I will check that stuff out. I might not agree on a lot of your ideas but I like your videos because many times you talk about things that I haven't though about.
@startmaking1
@startmaking1 11 ай бұрын
If we all agreed it would be a dull place to be. Thats my opinion anyway. I have learnt more from people in the comments than all the videos I have ever watched. Mainly people offering advice and telling me a better way. I will take it. Thank you.
@jaycee7338
@jaycee7338 Жыл бұрын
Just found your channel, this video is excellent. I'm a beginner & I've found it really useful. Thanks 👍🏿
@startmaking1
@startmaking1 Жыл бұрын
That makes me happy. Thank you.
@simplyphil.photography164
@simplyphil.photography164 Жыл бұрын
great tips and links in Amazon UK and the USA, lve looked at a couple, might try, thank you
@startmaking1
@startmaking1 Жыл бұрын
Hi. Thank you so much. Hope that it helps. And thank you for watching.
@MKWHD
@MKWHD 2 ай бұрын
Great tip of the centre drill bits
@startmaking1
@startmaking1 2 ай бұрын
Thank you. They still get sop much use and the better ones are working flawlessly.
@MKWHD
@MKWHD 2 ай бұрын
@@startmaking1 I have bought the better ones but I have yet to try them out. But they seem great.
@bryanwillis5149
@bryanwillis5149 Жыл бұрын
I would like to compliment you on your insight and your guidance to beginners. keep up the good work.
@startmaking1
@startmaking1 Жыл бұрын
Hi Bryan. Thank you so much. Very much appreciated.
@Nalski2007
@Nalski2007 Жыл бұрын
Keep doing what you're doing. Just discovered your channel today and I really like your honest style. Easy on the earn, no nonsense and no product placement. Thanks. Subbed.
@startmaking1
@startmaking1 Жыл бұрын
Welcome aboard. And thank you. I try to keep it that way.
@chriscunicelli7070
@chriscunicelli7070 Жыл бұрын
Liked what you said about the pocket jig. I recently bought one but haven’t used it yet.
@startmaking1
@startmaking1 Жыл бұрын
Hi Chris. Thank you very much. If you are yet to try it I don't think you will be disappointed. It opens up a nice easy way to hook larger pieces together and for draws it is very handy.
@RazakelKairo1994
@RazakelKairo1994 6 күн бұрын
13:27 Heck, this applies to a lot of things in life honestly. Should see the shite I've seen from people tracing artworks to understand some of the lines said artworks have placed. Truth is, there's a surprising amount of people whom get a certain understanding out of it. They then apply that knowledge (keyword) to their lovely creative projects. So I love your realistic view on these things. And its pure bonefied logic too. If pocket holes work, jig or not, the ultimatum is that its a tool and you're your own master and decision maker to use them. Stand proud on that one.
@startmaking1
@startmaking1 5 күн бұрын
Could not agree more bud. Thank you.
@poconojoe90
@poconojoe90 Жыл бұрын
Lint free shop towels And paint surface prep with acetone, denatured alcohol, etc.
@startmaking1
@startmaking1 Жыл бұрын
You would not believe it but I actually used as non lint free rag on osmo oil just this week and am still kicking myself. This is a video that could have helped me so there must be other people.
@poconojoe90
@poconojoe90 Жыл бұрын
Nicely done! Keep producing product reviews and I’ll keep watching.
@startmaking1
@startmaking1 Жыл бұрын
Hi Joe. Thank you for watching and for commenting. I have read all your comments and tried to reply to most. Just wanted to say thank you. You currently hold the record for most comments on a single video on the Start Making channel. From a makers standpoint I am very grateful. The level of input is much appreciated and taking the time to throw out so many cool ideas is also always welcome. The channel may not always do review videos, as I like to throw in beginner builds and shop upgrade projects but when I make them I love the response so please stick around through the videos that may not hit home perfectly for you as there will always be one that will in the works.
@BrainFizz
@BrainFizz Жыл бұрын
Ive been using Picas since about 2016… and in that time I’ve found myself using them less and less . they start off a tight fit in the holster, but after a while those little fins inside the holster wear to the point the pencil just doesn’t hold… and you loose it. For wood working they’re a total waste of money, regardless of your skill. The stock leads are too soft for any thing other than scribbling nots on plasterboard or marking out first fix. For woodworking they brought out the hard leads, but the tips still dull to quickly for any real accuracy so you end up sharpening them all day… and since the sharpener is at the bottom of the holster its a real fan. Tracer brought out there’s, and the little green ends fall of. All of the brands also use the same Chinese mechanism in their own plastic shell after a while they part ways and the whole thing falls apart. That said, props for being just about the only “5 tools i wish i had to start with” videos to touch on sharpening….. not a fan of the veritas - too complicated for me, the trend guide has a wide brass roller too, and a simpler set up - although there’s no options for micro adjust or cambered irons like the veritas.
@startmaking1
@startmaking1 Жыл бұрын
Again, great info . Thank you. I will keep an eye on mine to see how the wear and tear affects it. No issue with the leads yet but then it does sound like you use yours more than I do. I was worries that the Veritas honing guide was complex but I dont tend to use many of the settings, I use just the one for standard angles and then it is just 25 or 30. I dont even use the camber on the wheel for the secondary bevel as I would never remember to reset it. The Trend guide does look like a good option. I love sharpening and helping others with it. I think is is the one thing that when it clicked I felt a weight lift.
@BrainFizz
@BrainFizz Жыл бұрын
@@startmaking1 if you can sharpen, you’re already ahead of most so called “influencers” On KZbin.
@startmaking1
@startmaking1 Жыл бұрын
It's hard to get it right but with practise it finally clicks. Though, I still use a guide, freehand was way too hit and miss
@RCCraigoOnline
@RCCraigoOnline Жыл бұрын
I subscribed just for the comments on gate keeping. Woodworking is a hobby and a profession, and the level of skill is extremely broad. Pocket holes are good. Are other joints better? Absolutely. But that doesn’t make pocket holes any less good.
@startmaking1
@startmaking1 Жыл бұрын
All very true and thank you for subbing.
@johncarne4884
@johncarne4884 Жыл бұрын
Great video man agree with you on everything you said hultafors for a nice deep hole pencil that’s more like a classic carpenter’s pencil been using it a few years along side the pica.
@startmaking1
@startmaking1 Жыл бұрын
Thank you John. I have just bought the pica propelling pencil and I have to say with the HB leads, that one is a good all rounder.
@jeffhatcher6585
@jeffhatcher6585 3 ай бұрын
You need your own closed FB group. The bearded Viking has one, and I’ve NEVER seen a critical comment amongst the group. It creates a place for learning and encouragement
@startmaking1
@startmaking1 3 ай бұрын
You are spot on and I love how bearded viking has brought a load of people together. At the moment time is so scarce as I am juggling this and a full time job. But if this was ever to become the main job, I would love to do something like that.
@squiddyathome
@squiddyathome Жыл бұрын
Love the video Mark so encouraging - more please
@startmaking1
@startmaking1 Жыл бұрын
Hi Terence. Thank you very much. There are a few build videos coming this weekend then back to tools thereafter I think. Thank you for watching,
@anthonygriffin3147
@anthonygriffin3147 Жыл бұрын
I think you're doing a great job on theas videos very informative and funny for some strange reason I watch your videos all the way through 😂😂 keep up the good work
@startmaking1
@startmaking1 Жыл бұрын
Hi Anthony. You may be the only one as I tend to go on a bit. You wouldn't believe how much I cut out to get it down to this length. Thank you though. To make something and have even one person watch it in its entirety is very fulfilling. Much appreciated.
@zapa1pnt
@zapa1pnt Жыл бұрын
@@startmaking1I always watch through. I like your angle on things.
@startmaking1
@startmaking1 Жыл бұрын
It is always appreciated. Always .
@MildarValsik
@MildarValsik Жыл бұрын
By all means have fun with the pocket holes just not my style yet on thicker wood I might if it's in something I'm never going to see. I think if I was going to recommend something as a thing I wish i got sooner would be a respirator. I haven't got into dust collection yet as much as i should. Yet starting to learn there is uses for the saw dust and it will make the extra electricity cost worth it then. However a good respirator is still extremely useful for many other projects.
@startmaking1
@startmaking1 Жыл бұрын
good advice on the respirator for sure.
@MarkEllis-s8e
@MarkEllis-s8e Жыл бұрын
Well said for pocket holes i use them when i can and im happy with the results. And as long as im happy thats all that matters😊
@startmaking1
@startmaking1 Жыл бұрын
Spot on. Well said.
@Ocean-blue
@Ocean-blue 6 ай бұрын
It’s strange how pocket hole joinery is hated by some woodworkers when many traditional joinery often has dowels ( sometimes exposed and in contrasting wood) You can use wood plugs to hide pocket holes (matching or contrasting) and gain a mechanical benefit in many applications..
@startmaking1
@startmaking1 6 ай бұрын
I agree. And sometimes you just need something that gets the job done.
@DirigetDeus
@DirigetDeus Жыл бұрын
Excellent! Totally agree with everything. I guess I’m doing it right, as I have most of your recommendations. Especially the Veritas honing guide, just got it and it works great.
@startmaking1
@startmaking1 Жыл бұрын
Hi Bruce. Thank you so much. I am glad too that I am not too far wrong with my opinions. Cant always agree as woodworkers but it does seem like we all have fairly similar experiences especially early on. I just wish the veritas guide worked better on chisels without the extra outlay. Thank you for watching and for commenting
@michaelwillson6847
@michaelwillson6847 Жыл бұрын
M8 bravo 👏 crackinh video and honestly think the legnth was spot on. Love the pull saws its on my list stuff to get in very near future. Didnt no avout the Amazon set my one as u no came from eBay was avout 8 quid and came with all yhe extra lead yellow and red and they are interchangeable. One thing a do find with my one is yea its bigger and wont go in shirt pocket but wuth retractable lead and for price a just dont think a could justify the pica seems great though. Ill get u one these ones send it down with your box goodies. Ps fingers crossed this flys. Should do. 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿
@startmaking1
@startmaking1 Жыл бұрын
Thank you again Michael. I really cut a lot of my usual waffle out. People seem to be watching a decent amount if the stats are accurate. Good value for £8, I must say. I had earmarked the tracer set for you as there is no way I need all of the ones I bought. the cheapest without the holster is not great but the tracer is good apart from the stiff holster not coming out easily enough. It ihas a sharpie kind of marker which I will never use but I figured you might. Let's chat boxes when you have gotten the benches figured out one way or another.
@michaelwillson6847
@michaelwillson6847 Жыл бұрын
@@startmaking1 yea no worries. Keep your phone close a may be InTouch in next hour or so if your free am going slab shopping. May need your eyes Yea views are looking good or from what a see anyway. Honestly a thought the time and knowledge you put into it was great ad of watched longer.
@startmaking1
@startmaking1 Жыл бұрын
@@michaelwillson6847 Just popped it on loud. This is exactly why we need a discord server. More eyes to show the slabs to.
@michaelwillson6847
@michaelwillson6847 Жыл бұрын
@@startmaking1 yea deffo m8 well I'll be leaving mine shortly.
@rickbrewer8507
@rickbrewer8507 Жыл бұрын
Absolutely save up and buy the Kreg pocket hole jig. I started with a Wen jig that got the job done, but often had tear-out. The Kreg makes cleaner holes and other nice features that make it easier and faster to use.
@startmaking1
@startmaking1 Жыл бұрын
Could not agree more Rick. Thank you. Night and day difference in my experience.
@simonblooddevay
@simonblooddevay Жыл бұрын
Great video, thank you. Ref: the right-angled drill adapter, the power is "transferred" through the attachment. To aid memory, think of the "Transfer Box" on a 4WD/4x4 Vehicle! ;)
@startmaking1
@startmaking1 Жыл бұрын
Of course. I should have known. Thank you. And thank you for your kind comment.
@PartyOf8Please
@PartyOf8Please 11 ай бұрын
Hi, Mark! So glad to have found your channel, and thank you - I did subscribe! I read your bio and thought briefly how differently my shop would look today if I had started like you did and only bought what I needed, and not bought everything I saw just because I remembered my Dad using this and that over his 50 years as a carpenter in our small corner of the world. So, I’ve got a few tools out there that I might not use too often … I figure my kids can sell them on ebay when I’m done ‘going out back to see my therapist’!! 😉
@startmaking1
@startmaking1 11 ай бұрын
Hi, thank you for reaching out. I have to be a little honest, I do have a few boxes of romantic tool acquisitions. They may never see the light of day but they were too tactile to see thrown away. I love the therapy comparisons. this is the reason I started woodworking.
@PartyOf8Please
@PartyOf8Please 11 ай бұрын
@@startmaking1 This was cheaper than therapy … until the garage was too full for vehicles, so we added a big building behind our house! It’s a nice place to just go and be quiet
@startmaking1
@startmaking1 11 ай бұрын
Very true. The reason I dont have music or Tv in the workshop so far is because I like the quiet,.
@PartyOf8Please
@PartyOf8Please 11 ай бұрын
@@startmaking1 Agreed!
@mburke1211
@mburke1211 Жыл бұрын
Great presentation. You earned a subscriber. While I’m still a novice, I have purchased most of the tools you presented., and I agree with your assessments. Good stuff all around!
@startmaking1
@startmaking1 Жыл бұрын
Hi mburke. Thank you very much. You are welcome aboard and in good company. There are a ton of people starting their journey and in the early stages, much like myself. The comments are in the most part positive and very informative, especially from the experienced guys. Comment as often as you like, as questions whenever you need answers and my email is in the about section of the channel. Im in no way an expert but always happy to help.
@jeniferbatucan3638
@jeniferbatucan3638 Жыл бұрын
Wooow,, thank you for sharing your knowledge big help to us firstimer buying tools
@startmaking1
@startmaking1 Жыл бұрын
Gosh, you are more than welcome. I am still considering myself a kind of beginner. Glad I can help a few people.
@Polyhive
@Polyhive Жыл бұрын
I have just managed to make a carcass for a cabinet I am making and pocket holes are a major part of that success. My first real success!
@startmaking1
@startmaking1 Жыл бұрын
Well done. Thats brilliant. There are plenty more to come now.
@TController
@TController 5 ай бұрын
Call a Spade, a Spade, & be damned! I like your style of tutorial. New subscriber!
@startmaking1
@startmaking1 5 ай бұрын
Thank you. I can only be me. For better or worse lol.
@melissasilver4014
@melissasilver4014 Жыл бұрын
Thanks for some sound advice. Some good tips there and might look at upgrading my office mechanical pencil to something a bit nicer 😊 also, I’ve decided to subscribe. It’s nice to have fellow Brit for a change (I’m subscribed to a lot of American and Aussie makers).
@startmaking1
@startmaking1 Жыл бұрын
Great to have you aboard. Thank you.
@ianmurray3820
@ianmurray3820 Жыл бұрын
Hey Mark, don’t know if you use pallet wood for anything but if you do you might want to check out this mall punch. ( Air Locker AP700 Heavy Duty Professional Air Punch Nailer/Nail Remover/Nail Puller ) It works a treat, just watch for ricochet’s ) I bought a hyundai compressor ( Hyundai 50 Litre Air Compressor, 11CFM/100psi, Oil Free, Low Noise, Electric 2hp 230v ) really quiet and quick to pressure up.!! It does the mail punch, makita nail gun, spray gun’s no problem. And is so much quieter than my previous piston type unit..!!!!… just a thought..👍
@startmaking1
@startmaking1 Жыл бұрын
Your timing is so apt. I picked up my first pallet this morning. After much deliberation., Was planning on using it to clad a part of the wall in the workshop. I have seen these nail removers and really want a compressor long term. but the list is so long at the moment I really have to start with a table saw and choose wisely thereafter.
@catabaticanabatic3800
@catabaticanabatic3800 Жыл бұрын
Have had a set of those self-centering bits for many,many years. They are so handy. They're made for countersunk holes but can be used with non-countersunk holes also-with a bit of care and the appropriate sized bit.
@startmaking1
@startmaking1 Жыл бұрын
Agreed. You are right, it is a little bit more fiddly.
@sp-vt4je
@sp-vt4je Жыл бұрын
Some great advice in this video. Nice work!
@startmaking1
@startmaking1 Жыл бұрын
Thank you very much.
@teacheme
@teacheme Жыл бұрын
Thanks for reminding me about the angle driver. I've been meaning to get this for a while now but kept forgetting. DeWalt rules. I agree with your comments about "proper" joints. Not everyone can make dovetails or finger joints so, as you said, do the best you are capable of doing. BTW, the Tracer link is not for the set any longer, had to get one from Toolstation. I've said this before, but I could not live without my DeWalt impact driver. As for hand tools, I'm surprised at the number of times I reach for my electronic calipers especially when I'm trying to figure out screw sizes and wood thickness. Much easier than a ruler when your eyesight isn't what it used to be.
@michaelwillson6847
@michaelwillson6847 Жыл бұрын
Couldn't agree with this more.
@startmaking1
@startmaking1 Жыл бұрын
Hi Costa. Great to hear from you. You reminded me that I have not replied to your last email. I will. I think that the Dewalt angle attachment looks to be around £10 cheaper than when I bought it. That said, it is still priceless at the cost I laid out. Just one of those tools that does exactly what I need and well. I really liked the tracer pencil and if I was clipping it onto a thicker apron band or belt then I could get past the fact that when I pull it out it takes the holster too but I always put it in my pocket clipped to the side and I got really cross with it. Good pencil apart from that though. Not sure what is happening to the link, the US one is single and the UK one takes me to the set. Maybe it only works some of the time. It's all witchcraft to me.
@startmaking1
@startmaking1 Жыл бұрын
Don't worry Costa I make something silly like 10p for each item bought. No worry at all. Plus I don't ever want anyone to think that they need to buy through my links. Especially if the price is better elsewhere. They really are just there to guide people.
@mikebonello7494
@mikebonello7494 Жыл бұрын
I am confused by the sand paper discussion. The dust extraction holes on my Bosch orbital sander line up with the holes on basic sandpaper pads. I don’t get the advantage of having holes (or airflow) in areas where there are no suction holes - as with the mesh type expensive sandpaper discs.
@startmaking1
@startmaking1 Жыл бұрын
In truth, so am I, but it works. I think the design of the ceramic cutting pieces pattern makes it possible. Basically the dust doesn't get trapped between the abrasive and your piece. So the finish is better and the paper cuts longer. I also think that there must be suction travelling between the hook and loop as I was shocked about how little dust was left in the wood. And that is with a battery powered dust extractor.
@fifthamendment1
@fifthamendment1 3 ай бұрын
16:44 would a router be much easier to cut off the edge banding?
@startmaking1
@startmaking1 3 ай бұрын
Yes, more so if it is hard wood edging. though I find for this it is more messy that the cutter.
@Algardraug
@Algardraug 6 ай бұрын
I have a small pocket hole jig like in the video from Trend and it works great! I can see how the expensive one is much easier to work with though. But if you're a beginner and only making the occasional cabinet the small one is just fine imo :)
@startmaking1
@startmaking1 5 ай бұрын
You are right. Use whatever you have.
@Bari_Khan_CEng_CMarEng
@Bari_Khan_CEng_CMarEng Жыл бұрын
Power is translated. Surprisingly great video, and some good guidance. Much appreciated. Subscribed.
@startmaking1
@startmaking1 Жыл бұрын
Thank you and thank you again. Much appreciated.
@BrettsWoodshop
@BrettsWoodshop Жыл бұрын
This video showed up on my home page and it caught my attention because it's gotten a huge amount of views compared to the size of your channel. Enjoyed the discussion. Well done! Just subbed. Cheers Mate!
@startmaking1
@startmaking1 Жыл бұрын
Hi Brett. That is one of my more popular ones. Wish I knew why. Sometimes it all feels a little random on YT, Seen you are a fellow maker and have subbed back. will take a good look through your videos over the coming week. Great to find new channels.
@BrettsWoodshop
@BrettsWoodshop Жыл бұрын
Great to meet you, Mark!@@startmaking1
@startmaking1
@startmaking1 Жыл бұрын
You too bud. you too.
@f1remandg
@f1remandg Жыл бұрын
Oh and the other tool that’s worth having is the Mirka? Set that decorators use, I bought one many years ago long tube to hoover or Henry that is hand used but takes as good as all dust away through mesh pads, really good
@startmaking1
@startmaking1 Жыл бұрын
I envy the workers with Mirka or Festool sanders. I see them on videos without masks on. Not sure I would trust it that much but they do look seriously good.
@chrisgriffith1573
@chrisgriffith1573 Жыл бұрын
I am by no means a beginner, nor was I ever... I grew up playing in my Father's workshop at home, cutting things, making things... so by the time I took wood working seriously, there was very little in my mind that I didn't already know how to do. That said, I never wanted to use a pocket hole, but I tried it- got a jig, a lower level Kregg jig, and hated it! Hated it because the application of the pocket hole just took longer than making a proper joint which was stronger and better in every way, AND I had to buy the proper screws for pocket holes too! I don't think its not wood working, but, I don't recommend them either. I also do not want for a $17-20 pencil, I buy a pack of 20 cheap Pentel mechanicals, and throw them randomly all over my workshop... keep one on my self. Total cost there, $4.00. So far, I have only bought the one pack... ten years ago. I think I am down to about five pencils with lead... so it might be time to anti-up with a new pack of 20? Still cheaper than your refills? I am not trying to criticize you, your recommendations are probably catered to how and what you do, as my preferences are to mine, but there are differencing levels of quality standards that some jobs warrant, and some just aren't in need of the extra expense as you did point out. Thank you for taking the time to tell us about your journey!
@startmaking1
@startmaking1 Жыл бұрын
Hi Chris. Great comment. Great to hear other people experiences with some of the tools that I have come to rely on. I have to say that the Pica is not only to be judged on price. But I definitely take your point on the multiple cheap pencil purchase. It would, however drive me bonkers if I have loads of pencils lying around everywhere. I see some go the value of this pencil being that I only need one. Though, I may sing a different tune if I ever lose it. And I am mindful that my workshop/shed is only 10foot by 8 foot in size so I have far less places to lose it than other in larger spaces. I don't ever take comments as criticism. You are right we are all on different journeys and I am yet to build half the quality that I am sure you are producing .Also we work with different skills, machines, spaces. I genuinely appreciate just the fact that you have watched, and commented. And helped me to learn something .
@ChelseaPensioner-DJW
@ChelseaPensioner-DJW Жыл бұрын
As you say you're not in any way a beginner, so the comment on pocket holing is just about your personal preference which is fine but doesn't fit with the vid. There are plenty of professional woodworkers who are building cabinets and wardrobes who swear by them, yes they are tradespeople where time is money. There are also the beginners who start with pocket holing, gain confidence and then try traditional woodworking methods. Personally I'll use pocket holing for large jobs were the joints aren't visible, ie painted over. And hand joints for visible joints items were people want to see the wood. Both are valid to me.
@chrisgriffith1573
@chrisgriffith1573 Жыл бұрын
​@@ChelseaPensioner-DJW ​ Fine for you. I don't really care if my comment "fits" it is what I have to say. I don't do things to cheapen my stuff, I do it to make it the best way I can with as little effort possible, and I see pockets holes as a step down, I am not a manufacturer. I make stuff for me, and I feel better about not using pocket holes. If I were making forty desks, I might see it differently But just one? There is actually time savings in NOT using pocket holes.
@escos0410
@escos0410 Жыл бұрын
I still and always will Use my Yankee driver over a cordless when needed I get and agree with your comment completely In todays age the skill set just isn’t the same
@agimasoschandir
@agimasoschandir Жыл бұрын
[I am by no means a beginner, nor was I ever...] Neither was Mozart a beginner...
@yficfic8352
@yficfic8352 Жыл бұрын
Strange, I exactly did all the same mistakes. Lesson learnt for me : low cost tools are finally expensive, you have to by another one... Thanks for the video.
@startmaking1
@startmaking1 Жыл бұрын
Hi. It seems that a lot of us take a similar journey. I hope some of this helps. Thank you for watching.
@jaytrent62
@jaytrent62 Жыл бұрын
thanks for this, because of your video I bought my first self-centering bit yesterday. Quite helpful! (a self-centered bit sounds narcissistic, gotta say…)
@startmaking1
@startmaking1 Жыл бұрын
lol. You are absolutely right. It's the bit that says 'But what about me?'
@grantwhite
@grantwhite Жыл бұрын
Just wanted to say great video and very encouraging/positive for the beginner woodworker. I have just subbed and look forward to going back through your vids. 👍👍👍👍
@startmaking1
@startmaking1 Жыл бұрын
Hi Grant. Thank you so much. I hope there are some videos that you like. Great to have you aboard
@lespaulguitarmn1
@lespaulguitarmn1 Жыл бұрын
Liked your beginers buy video. Great ideas to present. I had sent Pica a request to put threads on their refill cap! At the cost procuction should of been tooled to have a threaded cap. I have one with a missing cap so the problem solved itself!
@startmaking1
@startmaking1 Жыл бұрын
Thank you. My Pica annoyance has resolved itself as during my shop build, I have misplaced it. That has given me a chance to test the others at length though. Despite the cap issues, I am still liking the Pica best overall. Now just to find it.
@baddog4347
@baddog4347 Жыл бұрын
Great positivity for beginners, one thing I would add is you can buy a small pocket hole tool like you showed but buy a good one from kreg, sometimes you need to take the jig to the project instead of a stationary jig 🤷🏻‍♂️ I personally use both all depends on what I’m building 👍
@startmaking1
@startmaking1 Жыл бұрын
Hi Bad Dog. Yes and yes. You are spot on. I tend to plan little to not at all and that tends to lead me into situations where I missed a hole or change my mind and need an extra shelf or something and there is no way that the huge Kreg is getting in. I believe the previous model had a part you could take off and use. But getting into the tight spaces is the only reason I keep the small jig around.
@baddog4347
@baddog4347 Жыл бұрын
@@startmaking1 yeah I have two of the small jigs one regular and another that’s an HD version for larger projects, I went with the masca version for my stationary unit because it was all aluminum with no plastic and it’s great, but thanks for responding 👍
@startmaking1
@startmaking1 Жыл бұрын
I am very jealous of the Masca one. I love the look and how robust it seems to be. Sadly in the UK I was really struggling on availability and price when I was shopping around. Would have been a tough choice if I could have found it. Though, overall I am very happy with the kreg, although first hole ever drilled the tip went through the wood and the plastic of the base, oh well.
@Audiotechnical
@Audiotechnical 4 ай бұрын
Really enjoyed every minute of that video! Thanks so much. Only the second video I've watched on this channel, and I'm so glad I found it. May I ask (and it's not specifically related to this video, but..) where do you get most of your standard ply from? Lawsons, B&Q, Selco, Fairhalls all do it (for what seems like similar prices), but do you have a preference?
@startmaking1
@startmaking1 4 ай бұрын
Thats really kind. Thank you. To be honest, if cheap is the criteria then wicked works fine but the quality is rock bottom from what I have found. Out of all the rest I dont have a preference. But that is mainly because I have a local timber merchant in my local town and they have a mid range ply that is definitely not perfect, the veneer is very thin and it is not perfectly flat but at the price it is great for workshop cabinets, jigs and stuff like that. I have never tried baltic birch and the pricey end of the market but that is mainly because I dont have plywood jobs that need it.
@Nika_Scott
@Nika_Scott Жыл бұрын
My most used tool and a must have in any shop is a digital Vernier calliper. Preferably Mitutoyo brand.
@startmaking1
@startmaking1 Жыл бұрын
Great advice. Thank you.
@JasonGrissom
@JasonGrissom Жыл бұрын
Great video Mark! Love the rant! Everything you mentioned was absolutely true and well said. Also...I think you were looking for "The power is transferred". 😂
@startmaking1
@startmaking1 Жыл бұрын
Hey Jason. Thank you as always. Transferred, thank you, I was still trying to find the right word this morning, weeks after filming. looking forward to your next video bud.
@1pcfred
@1pcfred Жыл бұрын
Power is transmitted. That's why we call them power transmission cables. Cars have transmissions in them too. Garbage is transferred. You dispose of items at the transfer station.
@liesluiten
@liesluiten Жыл бұрын
It would be nice if you leave links in the description to the products. Thanks. Great job. Ik like your polite way without talking without bad words.
@startmaking1
@startmaking1 Жыл бұрын
Hello. And thank you. I am a little confused though as there are links for all products recommended in the description just under the first paragraph. I have broken them into chapters. At least I hope that they are still there. And thank you for your kind comment.
@liesluiten
@liesluiten Жыл бұрын
@@startmaking1 Thanks, i'm going to check! Thanks for repyling!
@rkerby6375
@rkerby6375 Жыл бұрын
Great video! Well thought out and excellent presentation! Well done!
@startmaking1
@startmaking1 Жыл бұрын
Hi. Thank you very much.
@bhartissimo
@bhartissimo Жыл бұрын
I've been using Suizan saws for some time now, but just recently bought the Dewalt angle driver and the Bosch self-centring bits.
@startmaking1
@startmaking1 Жыл бұрын
Hi Bart. I am still getting used to the saws. Sometimes I love them, others not. So it must be me. Definitely a better muscle technique though. The dewalt and centring bits are symbolic of my progression in my mind. they signify a shift from just buying the cheapest tool for the job to one that will serve me well for a long time.
@bhartissimo
@bhartissimo Жыл бұрын
@@startmaking1 That's pretty much the same for me. I started out buying cheaper tools and accessories. Some worked OK, others were a pain to use. I made the decision a couple of years ago to switch to tools and accessories that are more reliable, even if they cost more.
@jamie7364
@jamie7364 Жыл бұрын
I would like to say, regarding pocket hole joinery, that it often depends on the quality of wood. The MDF and plywood that I get in Zambia just doesn't go well with pocket hole screws - the boards split (and yes, I use proper pocket screws). I use pocket holes with pine and eucalyptus and find it great.
@startmaking1
@startmaking1 Жыл бұрын
That is a very interesting point Jamie. Thank you. I had not thought about the wood type.
@cnew4682
@cnew4682 Жыл бұрын
NICELY DONE from Oregon USA
@startmaking1
@startmaking1 Жыл бұрын
Thank you very much. Appreciated.
@BrettDalton
@BrettDalton Жыл бұрын
Edge trimmer router would be suggestion. It's super versatile for a bunch of other jobs as well
@startmaking1
@startmaking1 Жыл бұрын
Hi Brett. Great suggestion. Not long had mine and you are right. Thank you
@1steelcobra
@1steelcobra Жыл бұрын
I'll note that Harbor Freight makes some pretty good self-centering bits that have the tapered sleeve for under $10 for a similar 3-piece set, plus pretty decent countersinks. The Dixon Reach is a good alternative for the Pica pencil at about $12-14. It even includes 12 refill leads.
@startmaking1
@startmaking1 Жыл бұрын
That is great value. I hope that they have the same build quality. It so, then that is a real bargain. I would love to have access the HF in the UK, Seems that they often have some great bargains.
@tonyminehan2386
@tonyminehan2386 Жыл бұрын
I hate sanding, so what I use is a psychotically sharp plane iron in a hand plane, with that, I can get a super smooth finish, no sanding needed. The one draw back is, you must keep the iron sharp, better yet, have a second iron and when the plane stops cutting, even slightly, change the iron over. No dust extraction needed 😊
@startmaking1
@startmaking1 Жыл бұрын
I ma trying to aspire to that. My planes need a little more dialling as when they are sharp enough they sometimes dig in at the corners so I need to take the corners off a tiny amount. It's all a learning curve.
@mpikas
@mpikas 11 ай бұрын
I find myself not really agreeing, some of this is the kind of projects, but I think some of this is about the attitude you approach the projects with: 1- Sandpaper, yea, if you're using it on a machine, just buy the best and get it over with. By hand, well you can skimp, but if you're really doing that kind of thing by hand, look into rasps, planes, cabinet scrapers... 2- Centering Drill bits. I just thought it was a cool idea, so I bought a middle of the road set early on. They looked like your cheap ones but worked like your expensive ones. Honestly I doubt I've used them 3 times (I can only think of once). Most of the time when I need to do hinges like in your example I use an awl, a much more useful tool, and I've never had a problem with centering things. 3- I don't know here, the Dewalt one in a package with some other goodies was the cheapest one I could find locally and I needed it that day. I haven't used it since I got a right angle drill in the M12 line. 4- I have a Kreg cheap one, and a fancy knockoff (lever action clamping, all sorts of adjusting, functions like your expensive Kreg but looks more industrial)- They serve a function, but I think I've used it 2x. If I can hide fasteners, I reach for my brad nailer- glue and brads, WAY faster, can be very precise and depending on materials 18ga brads sunk a little can actually be used on fine finished stuff and the holes disappear by the time you're done sanding and edging. I'd but a good brad nailer at the top of my list. I really want to get a 23ga nailer that shoots longer brads (23ga didn't exist or at least wasn't common when I was getting started) 5- I've done a lot of stuff out of plywood and other composites... I've never used edge banding. I've either hid the edges, mitered them, glued (brad nailed sometimes) wood strips to hide it or made it a detail. I've never even had the desire to used edge banding yet 6- no arguments with the saws... honestly get what you want/need for the applications. My "japanese" style saws are American saws in that style and I'm happy with them. 7- I have a similar cheap guide and the Veritas guide (I actually have 3 of them, they kept sending me stuff to try to fix problems). The cheap guide I like OK, I machined an aluminum block to help setup the different common angles. The Veritas, well I got 3 in a row that wouldn't hold the blade flat, I'd get an angled bevel no matter what I did. I ended up shooting a video of me setting it up for them to see that their guide was the problem. I meant to take them apart and machine them square but never got around to it. I'd put "learn to sharpen blades by hand well above purchasing something to do it. It's more flexable (you don't need the correct attachement for each different thing) and faster. 8- Honestly I use an old drafting pencil or a mechanical pencil for 90% of my marking, I've used the same 2 for maybe 20years... if I need something else it's usually the awl or a sharpie. I'd have accurate measuring tools (2 different squares, and angle finder, digital level, even calipers) WAY at the top of the list, and an air compressor would be quite high. Shop vacs and cyclone dust separators also improve quality of life in a shop quickly.
@startmaking1
@startmaking1 11 ай бұрын
Wow, great comment and to be honest we dont all agree and that is how it should be. woodworking is so diverse, I can only give an opinion from my experience, as little as that may be. I read all of your points and suspect that I will feel similar to a lot of them as my skills progress. It feels like you are more experienced than I am and it all makes sense if that is the fact. Pencils are a funny one. I get that any pencil can do a great job and I knew that the pica set would divide people and I think it is the gadget lovers who love the pica and more traditionalists who dont. But that could be wrong too. Agree 100% on the dust collection and as I am heading down that rabbit hole in a few weeks, I realise it is far more important that it seems. Take sanding for instance, the level of dust collection/extraction you have affects the life of your sand paper, so it will definitely affect my experiences. once again, thank you for the detailed comment and advice.
@ssao0000
@ssao0000 Жыл бұрын
Thank uou for your view on tools. I've something to share: my dad went to a trady school in the 30"s, learned how to file ballbearings. His life toke him to airplanes. But before he unexpectedly died he told me a lot about tools. Later in my life i met a technical designer with woodworking as "hobby". My dad taught me metallurgy and his replacement taught me tools and precision. Both said cutting down a decent brand tool for an inch, file/grind them roughly and then sharpen them. 50years on I still use the 40mm and 20mm plain steel Nooitgedagt.
@startmaking1
@startmaking1 Жыл бұрын
Hi. You're welcome. Good advice is hard to find and your dad sounds like he had it. Sounds like it still serves you very well.
@bobbrock41
@bobbrock41 8 ай бұрын
The right-angle drill attachment. What if you need to actually drill a hole rather than just drive in a screw?
@startmaking1
@startmaking1 8 ай бұрын
I have used the dewalt one for that purpose. The drill bit was a little lose but it worked. I used a counter sink bit as it has a hex attachment that slots into the drill attachment.
@dannyboy9817
@dannyboy9817 Жыл бұрын
Great video. I concur with pretty much everything you have explained here. I recently "treated" myself to a set of no name cheapo hinge centre drills that look identical to the cheap ones you showed. I am very underwhelmed. They are not concentric and wobble as they spin. Granted, they were under a fiver for a set of three but they are junk, frustrating to use and I wish I'd just spent a bit extra and gone for the Trend ones I've been eyeing up for a while. I have the Woodcraft pocket hole jig too and as you said, it works and I have been glad of it from time to time, but the results are not great, although it seems to cut a bit cleaner than you showed. Fine for some tasks although it is a bit of a faff to use. I'm tempted by the Kreg one you have and your demonstration of it was impressive.
@startmaking1
@startmaking1 Жыл бұрын
Hi Danny Boy. Thank you. You would not believe how many woodworkers have gone or are going down really similar paths. I get so many comments about the different tools. We all love a bargain but sometimes the quality reduction is just not worth it. That said, the Kreg is pretty pricey.
@ninj3x687
@ninj3x687 Жыл бұрын
I’m a fan of wooden joinery & that said, I will use pocket holes wherever & whenever appropriate. Not every project or joint needs anything beyond a pocket joint. One can easily hide them with dowel plugs(love my plug cutting bits).
@startmaking1
@startmaking1 Жыл бұрын
That is very true. I am looking at plug cutters now. Good tip. Thank you
@chrisruss4979
@chrisruss4979 Жыл бұрын
What a great video. Food for thought !
@startmaking1
@startmaking1 Жыл бұрын
Hi Chris . That is all I can hope to give. thank you
@Jeff-rk8hq
@Jeff-rk8hq Жыл бұрын
Hey man great video, I really appreciate your tips….on the subject of pocket holes, have you heard of the Porter cable model 560 quik jig pocket hole joinery jig?…It’s older and has been discontinued for some reason or another, I’m guessing it didn’t help how little it was marketed as well as being in the midst of PC’s time of company turmoil unfortunately but it is a really good design for a first revision that had a lot of potential and works extremely well, just push down the clamp and turn the knob and the clamp self adjusts but ya it’s a phenomenal unit they’re just hard to come by check em out if you hadn’t seen them
@startmaking1
@startmaking1 Жыл бұрын
Hi Jeff. Great bit of knowledge. Thank you. we don't tend to see as many porter cable products in the UK as far as I know but I will start a little research. Thank you.
@SaintFredrocks
@SaintFredrocks Жыл бұрын
Make sure you use the protective pads when you use the mesh sandpaper, or you will be replacing your sanding pad after the hooks get worn off. Great sandpaper.
@startmaking1
@startmaking1 Жыл бұрын
That I great advice. Luckily on the Makita, they dont stick on without them so I was forced to.
@MrMartinburgar
@MrMartinburgar Жыл бұрын
Used abranet sanding pads in the past on makita dealt and metabo same result, knackered the hooks on the sander even tried bosch pads they come with a saver pad witch lasted the least amount of time not sure if I did something wrong but the net discs would just spin off after about 5 mins all used with vacuum
@startmaking1
@startmaking1 Жыл бұрын
That's strange, With the disc savers on that I showed in a really short video , kzbin.info/www/bejne/maixo36jqaehZrM, mine now are fine. Maybe try a different pad. I like the thin ones from the links, not the padded ones, they are for edges. Mine have held up so far but it doesn't get mega heavy use. they at least don't fly off now, either with to without vacuum.
@dc4046
@dc4046 Жыл бұрын
I think the word you were looking for was “transferred” 🙂 Great video by the way, thanks, it was very informative for a beginner like me.
@startmaking1
@startmaking1 Жыл бұрын
Yes, I seem to be worse with words the more I talk. And thank you for the kind comment .
@guitfidle
@guitfidle Жыл бұрын
I have a Japanese saw with a backing bar that is absolutely wonderful for joinery. I like it SO much more than the western style backed joinery saws. For some reason, I never lose pencils. I still have the Staedtler mechanical pencils I got in college, 30 years ago.
@startmaking1
@startmaking1 Жыл бұрын
Wow. You must have set a record with that pencil. Mine last just enough time to blink. I am torn on which saws i like and it is not about function really. I just find a vintage western saw more satisfying to hold. Maybe it's the wooden handle, or the handshake it gives you. But for cutting alone it is Japanese all the way.
@whiskeygrunt772
@whiskeygrunt772 Жыл бұрын
I commented above along the same lines. I have 2 Pentel P205s that I have had for over 30 years. One is my shop pencil, the other never leaves my desk.
A Years Worth of MISTAKES Corrected || Beginner Woodworking Tips.
26:07
Start Making (Woodworking)
Рет қаралды 38 М.
7 TOOLS You Will Have To Make After Watching This.
23:06
Start Making (Woodworking)
Рет қаралды 115 М.
VIP ACCESS
00:47
Natan por Aí
Рет қаралды 30 МЛН
Try this prank with your friends 😂 @karina-kola
00:18
Andrey Grechka
Рет қаралды 9 МЛН
Sigma Kid Mistake #funny #sigma
00:17
CRAZY GREAPA
Рет қаралды 30 МЛН
5 Beginner Woodworking Tools I Regret Buying
15:12
John Malecki
Рет қаралды 1,7 МЛН
Time to cut through the years of lies.
18:16
Start Making (Woodworking)
Рет қаралды 99 М.
Tools Not To Buy | Learn From My Mistakes !
19:29
RobCosman.com
Рет қаралды 520 М.
Beginner Woodworking Project that Sells | ONE BOARD BUILD
22:48
Start Making (Woodworking)
Рет қаралды 731 М.
Everyone is Wrong About this Traditional Tool
16:40
Rex Krueger
Рет қаралды 122 М.
5 Beginner Woodworking Tips I Wish I Knew Sooner
17:40
John Malecki
Рет қаралды 1,3 МЛН
Wish I Knew This YEARS Ago!
29:09
Biscuit Tree Woodworks
Рет қаралды 412 М.
I don't get why people don't build cabinets like this?
33:42
Lincoln St. Woodworks
Рет қаралды 625 М.
Tools every woodworker needs | Start Building for under $1000
24:08
Bourbon Moth Woodworking
Рет қаралды 1,3 МЛН
7 COOL Tips You Will Actually Use || Woodworking Tricks
21:44
Start Making (Woodworking)
Рет қаралды 118 М.
VIP ACCESS
00:47
Natan por Aí
Рет қаралды 30 МЛН