Stationeers: Creative. Step by Step auto Furnace

[@blidis]

thanks for showing how to build a simple advanst furnace i built one but made my own design 👍

[@sgtgumbo866]

AWESOME!!! It works! Well done Sir!

[@duke_euphoria]

Yay, Many thanks! Glad it went smoothly for you!

[@lonjordan3019]

Just found this. Thank you for taking the mystery out of the Advanced Furnace . Love this video. You have earned a Subscriber.

[@duke_euphoria]

Yay! Many thanks.

[@bobsnowball4389]

Excellent. Thank you so much. You've made things very clear. One thing though; what is the window that opens for you to choose building items?

[@duke_euphoria]

Hiya, that window is the "Creative menu" that only appears in creative mode when you press "\" Using Creative Mode means I don't have to make a full manufacturing rig to show off how to build things

[@bobsnowball4389]

Many thanks Duke.

[@danielbloom2470]

Thank you very much for the tutorial. I know how to make atmospherics like a pro in other games similar to this one, but in this one the three dimensions makes my habits for finding ways to optimize space by condensing designs makes my OCD go on fire. Watching your video helped me, but I won't lie, the amount of space you used was killing me.

[@duke_euphoria]

Oh my yes. This one is all spread out to make it easy to read. When I'm pressed for space, there's a lot more squishing can go on. You want me to make a vid showing "how small can we make a furnace ?"

[@danielbloom2470]

@@duke_euphoria That would be GREAT!!! :D

[@duke_euphoria]

@@danielbloom2470 I shall make a plan

[@danielbloom2470]

:DDD

[@Suge212]

You have the perfect narrator/story teller voice and accent. I swear you should try to put yourself out there in the voice acting world.

[@duke_euphoria]

Why, Thankyou, that's awesome to know. I might even give that a go...

[@want2dropout]

Hi Duke, thought you might like an update. After a few explosions, which were all my own fault, did my first smelt this morning and all worked perfectly. The pace of your tutorial video made it so much easier to refer back to when the construction process became a little foggy. Have left feedback for your Steam workshop scripts and a little gift. Keep up the great work and looking forward to the next video 😀👍

[@duke_euphoria]

Wahoo! Glad it (eventually) went well

[@felouren]

Thank you Mr Duke. Great job! It worked perfect.

[@duke_euphoria]

Yay. So glad it;s working for you

[@want2dropout]

Hello and thank you so much for a well presented and informative video with some nice chat along the way. Have subscribed to be sure I don't miss any future videos. Building the advanced furnace looked as though it was going to be a headache from some of the other videos I've watched. You've saved the day and boosted my confidence to go and give it a go. Keep up with the great videos 🙂

[@duke_euphoria]

Thanks! Glad you enjoyed it, and thanks again for the subscribe... Stationeers does look intricate, sometimes explodey, but it's always fun... If you're a twitch bunny poke a nose in there on Thursday and Sunday evenings where we're having fun somehwhere in the solar system. If you've got any suggestions for what to record, do bounce them to me...

[@erikeggenbakstad]

Subbed and thumbs up! I gave you some recommendations on your workshop items also. This is the best and flawless code and setup I have tried so far. I am going to look at your other IC codes as well. I set this up today and followed your video here and it worked "straight out of the box" Thank you! Erik aka Norseman.

[@duke_euphoria]

Yay,. Many thanks!

[@erikeggenbakstad]

@@duke_euphoria Np! You are streaming on Tuesdays? I'll be there mate 👍

[@duke_euphoria]

@@erikeggenbakstad Not Tuesdays anymore (schedule changed) But Thursdays and Sundays 19:30gmt for Stationeers. Late Monday for Sea of Thieves, Wednesday for Something else (currently X-Com2)

[@erikeggenbakstad]

@@duke_euphoria Got it 👍

[@Vargarslet]

Great tutorial *thumbs up*

[@duke_euphoria]

Thanks, good to know it's doing the job.

[@temdeker]

Thanks, its work !!!!

[@duke_euphoria]

Horrah!

[@sfaonetime]

i have been following this video to a T. I have subscribed to the steam workshop. When i Try to inport the code its only giving me one option. The Furnace Hash IC 3; Thats the only one i can even see. Nevermind, Im an idiot. I figured it out, Great Video!

[@duke_euphoria]

Yay, How does it work out for you ?

[@want2dropout]

Have a question for you Duke. Should the furnace only be used outside of your base ? Currently set up on Mars and decided to close the furnace in so that storms don't stop me using it. It's in a 8x6 room with just Mars atmosphere but gets really toasty trying to make the fancy ingots.

[@duke_euphoria]

"should" is a tricky one to answer. The furnace is going to get warm, plenty warm, and that heat has to go somewhere. Ideally you'd pipe the exhaust gases through insulated pipe into, either an uninsulated tank set outside where you let them cool and then filter the gases, or an insulated tank so you can feed the hot gas to some stirling engines for extra power. If you're venting the furnace straight into your big room, it will indeed get pretty toasty in there! Simple plan for that is possibly just venting outside through some insulated pipe.

[@want2dropout]

Hi and thanks for the reply. Have re jigged the room walls so that the frame housing the furnace is outside plus the waste tank is as well. Changed the waste tank pipe going to my filtration for insulated pipe. Also put in an active vent above the area in front of the furnace pulling in outside atmosphere through a passive vent on the other side of the room. Ran the furnace for Astroloy this morning and the room temperature stayed normal 🙂. Made a little addition to the system with a Pipe Analyser between the mixing valve and the fuel pump with a pressure readout on a console. Find it makes it easier to avoid mixing too much fuel and raise the pipe pressure too high.

[@duke_euphoria]

@@want2dropout Nice. Sounds like a good solution! I often have a tank in between fuel mix and furnace. Can read the pressure off that, and even build a little automation to make sure tank is always full enough, But not too full...

[@want2dropout]

@@duke_euphoria had considered a buffer tank but was much easier to fit the analyser in. Filling tanks and pipes too much was becoming a speciality of mine 😁

[@duke_euphoria]

@@want2dropout Everyone loves a good Kaboom!

[@PhilDeSade]

Great Tutorial, nice code. Easy to build furnace, far better than a manual one. Sadly not fuel efficant and a bit slow, but for that simple design u cant expect more i guess. One important qeustion (cause i use it in coop): is it possible to make it boom? Or is it absolut idiot proof? Great work, keep it up. Subbed here and will try to catch you on twitch. :)

[@duke_euphoria]

Many thanks! Aye, 'tis Not swift for some alloys, and the fuel efficiency is _dire_ but hey, with added efficiency comes added complexity. It's not too awful if you scavenge the waste gasses and filter them. As far as i know sealing the furnace inside a block makes it utterly unboomable.So far I've not managed to explode it at all, even when trying to...

[@JoshuaCampbell-hy2bb]

Thanks for the video works perfectly except for invar with an update the values have changed can you explain the code so i can update the IC code for new values

[@duke_euphoria]

Hiya, as far as I can see the values for Invar are the same as they ever were. 1200k-1500k and 18-20 MPa What seems to be the trouble ?

[@SirKitchen]

Hey Duke! Great tutorial. Did you happen to post your world/code to the Workshop? Could we get a link in the video description if so please?

[@duke_euphoria]

HIya, Should be three links to the code for the three chips in the description. (Hit the "show more" Button if they're not there instantly) Would the world also be useful ?

[@SirKitchen]

@@duke_euphoria It definitely would be for training purposes. But I followed along and built it. Also I payed attention when you mentioned we can find it from your Twitch profile the second time I watched it! Haha.

[@duke_euphoria]

@@SirKitchen Horrah! Did it work out ok for you ? I'm going to be doing the Auto sorter and dispenser rig too sometime soon. So you can just empty your ore into a hopper and get int automatically sorted into silos. If you're on Twitch, hit me a follow and get notified when i'm doing mad things like that.

[@SirKitchen]

@@duke_euphoria It did. Worked fantastically. I already had a Auto Adv Furnace set up that I like but kept getting to a explosion point due to over pressurization and your build solves that for me. Plus Ill just expand it into gas collection.

[@duke_euphoria]

@@SirKitchen Horrah!

[@danilocalado564]

I'm using your Control Chip Code but I'm not able to make Stellite. For some reason the temperature does not stabilize properly, can you help me?

[@danilocalado564]

I managed to solve it, I just needed to seal the furnace with iron frame ^^

[@duke_euphoria]

Horrah! Glad to hear it worked out. Sealing the furnace into a frame is a little sneaky, but it does work, for the moment. If things change I'll need to look at my temperature levelling code...

[@blackshealdgaming3045]

hey man tanks for the tuturial it helped me a loot . but i have a problem whit waspeloy . when i try to make it . the temperecure is stay at 2149 c / pereshour is ok . and it is not make it ! i think may be a code problem .

[@duke_euphoria]

Hmm, It's made Waspalloy Ok every time I've tried so far... Which planet are you on ? Things to check: Have you got a supply of coolant gas ? If your coolant tank has run out it won't be able to drop the temperature as needed. Is the ingredient mix correct ? Is your fuel mix correct, approx 66% H2, 33% 02 if those are all fine try dumping out the furnace, (set the dial to position zero and hit the Go button) and start from nothing...

[@blackshealdgaming3045]

@@duke_euphoria HEY tanks for answer . i am on ouropa 2 and have collant gass . i try using another collant

[@duke_euphoria]

@@blackshealdgaming3045 On Europa the coolant gas can just be ambient oxygen. So long as you're not feeding hydrogfen in to keep the burn going that should cool things nicely.

[@blackshealdgaming3045]

tanks man

[@duke_euphoria]

@@blackshealdgaming3045 Entirely welcome. Did it make you some Waspalloy in the end ?

[@gohyen1105]

couldn't find your hash chip code

[@duke_euphoria]

'Tis here... steamcommunity.com/sharedfiles/filedetails/?id=2651205554 Added the link to the Video too., Many thanks.

[@gohyen1105]

Hi, i subscribed to your steam and follow the link to your steam workshop but still i couldn't find the code.

[@duke_euphoria]

@@gohyen1105 If you've subscribed to the item on the team workshop the code will be in your code library inside Stationeers. Open the code editor in the ingame computer or laptop and click "LIBRARY". A new window opens with all of your subscribed steam code items available.