Intex ZX300 Deluxe Automatic Pool Cleaner Vacuum Install Test Review

[@StatUpBox]

Here is our video on how to install in a summer waves pool or any other pool kzbin.info/www/bejne/eKm0mnd6YtSsnpI

[@amberb8124]

Came for the review... stayed for the narration 😂❤

[@StatUpBox]

👍😊❤

[@tgarcia8163]

Thank you for your information! So didn't know I would need an adaptor. Life saver! Keep up the humor so we can all tackle problems with a smile!🤣

[@StatUpBox]

You bet!👍😊❤

[@daylinelisboa4983]

Man, great video! I installed the pull jet and connector from your other video super easy! And now I’m waiting for it to fill back up so I can use the vacuum. Your great at explaining and it’s super simple!

[@StatUpBox]

Nice work!💪 thanks! 👍😊

[@heathersluga4342]

Thank you!!!!!!! We didn't realize this needs to plug into the water INLET! Love your sense of humor.

[@StatUpBox]

You are so welcome! thank you! the hose is connected to the automatic pool's cleaner inlet and the end of the hose connects to the pools water outlet adapter (where the water comes out, after it filtered by the pools pump)

[@enteryourname2289]

Wait, so I connect it to where the water is pushed out into the pool? I really do need it explained to me like I’m 5 😂

[@raekenny8695]

Thank you for this amazing, humorist, easy to understand video... Helps so much to get us on to a clean pool machine ❤

[@StatUpBox]

Glad you enjoyed it!

[@anachatzigeorgiou7913]

Thank you for your help ❤How many hours have to work for the biger Intex Pool 7,30 meter* 3,60 meters?

[@tubo424]

Would one of these pool cleaners work with a regular 1/2 hp pool pump and sand filter?

[@eliiahu]

will it work on the intex 636t pump, about 4500l/h?

[@lisasimmons8343]

Why is the hose blowing off at the flow back hook up

[@lilmama4426]

Love this!🤩 Came for instructions but def enjoyed the show!☺️

[@mercedes1273]

La manguera va conectada a la parte donde saca el agua o donde entra

[@davidmorales4768]

Donde saca

[@dermoini2669]

How much power (for the pump) is needed for this

[@samuelfebrian9398]

should we always use the connector? mine is concrete pool but unable to climb the wall, any idea to solve this?

[@KenMem-ho4xb]

Why does mine seem to move slow and not crawl the walls like yours? I have an above ground coleman pool with flowclear pump (what came with). What am i doing wrong?

[@warrenafrica9994]

What size pump you have

[@israelquintero3118]

I have a bestway pool and try this machine but the connection to the inlet does not stay , every time I turn the pump on it pushes the connection out , is there an adapter or something I need to make it work ?

[@SS-iy2df]

Ok I purchased this but I don’t have that outlet in our pool please help

[@MrPurpleprincess47]

So I have a 530 gallon filter pump. It’s not strong enough to move this vacuum correct?

[@bee2333]

So it goes on the outlet side?

[@grumpyfeller]

Is it possible to let vacuum run to long?

[@F_H_Dmax]

does it work with a normal pool with skimmer ?

[@RylanKeller-q9y]

What setting does you filter need to be on?

[@stepbystepwithhussein162]

I have an overflow pool with floor inlet. Can I use the vacuum point in the wall of the pool to contact it with automatic cleaner??? Please answer me

[@jennifercastro5386]

Thank you for this helpful video. However, I am having a really hard time removing the pool's oulet adapter to install the vacuum's adapter. Any recommendations?

[@lmandtm]

Where can I get a replacement intex zx 300 vacuum outlet adapter?

[@stephanieflores8400]

Where can I buy the orange ans black adaptor ?

[@DarioCindric-be3nw]

does it work with pool pump 3700l/h?

[@kendrahill956]

I just bought the intex pool vacuum and got it today! Unfortunately the hose did not fit my summer waves pool outlet. Do they make an adapter that will fit?

[@StatUpBox]

We have a video on how to replace adapter . Here is the link. kzbin.info/www/bejne/eKm0mnd6YtSsnpI

[@scottsymonds1950]

10ft pool also>?

[@tgarcia8163]

Seems like there's a trend with the wheels not turning anymore, hence the brushes don't turn. It has water flow, but no go...great sadness! I'm going to take the wheels off and see what is wrong. The wheels are stubborn to turn. If you have any other ideas...please share.

[@kandymoore9181]

check to see if the drive belt is broken-happened to me and they are NOT replaceable so I have to buy a whole new unit-not a happy camper! All my pool items are INTEX!

[@revitala3063]

Great video thank you! What do you do with the blue strainer grid extension? I think if you have intex you don't need that piece.. not sure As well I have the rectangular 32ft*16ft. Do I need to measure and cut the hose like intex manual say? I don't think so and I'm afraid if I'll cut it....there is no way back... Thank you in advance ☺️

[@KarinaKozhukharenko]

I know this comment is late. But I had someone 3d print me some!

[@tgarcia8163]

So, it turned out that I had forgotten to take a block off the return filter...lol...also those little black disk are important steering mechanisms. Otherwise, it just goes back and forth over the same area. Arg.

[@bethanyhenkes2520]

So when you take the pool cleaner out , is there certain way? Cuz I pulled it out and all the depree came flowing out. 😢

[@carleencd]

Same here, and was really annoyed. Mine also has water pouring out when I pull out but in the video it doesn’t. Someone in this thread told me to flip the machine before I turned it off and then take it out. I’ve had to try to take it out and placing a net under so if it does come out it goes into the net. It is very annoying watching all the rubbish go back into the pool and since hardly anyone else has an issue, must be us!

[@chiquito003]

Hi. I have a Summer Waves pool and just bought this pool cleaner from Intex. Could you please let me know the exact connector I have to buy to adapt this to my Summer waves pool?

[@StatUpBox]

here is our summer waves video installation video with parts kzbin.info/www/bejne/eKm0mnd6YtSsnpI this is the kit we used amzn.to/3zWgDDM all things used in the video we have links in the description of the video

[@lfantasy5040]

This will work for in ground pools too right?

[@StatUpBox]

It should. Would need to find correct adapters and connectors

[@1capuchino]

Big problem where you get the belt for the tires...really hard to get them..any help where get I get those transmission belts

[@olgaramirez100]

Amazon

[@shawnmurtaugh1412]

Great stuff man!

[@StatUpBox]

Appreciate it!👍😊

[@carleencd]

Everytime I try to get the cleaner out of the pool, some of the debris falls back in. Is this normal or is mine faulty.

[@StatUpBox]

Pro tip. Have it suction to the last minute that u pick it up. Then flip it inside pool. Turn off. Then take it out. There's a trick to take out when is full. Because sometimes debris and leafs are not fully in the basket. This has helped us. In those certain cases. But we do it all the time just to avoid guessing. Good luck.

[@carleencd]

@@StatUpBox I turned it off, flipped it and then took it out last time but still saw debris. I’ve made sure the flap opens the opposite way to which I lift it out and resorted to trying to have the pool net underneath it too. I think removing it is definitely a two person job! Thankfully it takes more debris out than ends up back in when removing it! Thank you for your help.

[@StatUpBox]

@@carleencd no problem. flip then turn off. The net under. That's a good tip. Thanks 👍😊

[@guzmancharles7]

Very informative, great video👍

[@StatUpBox]

❤️😊👍

[@nrhareiner]

So this will only work on an I tel pool??

[@StatUpBox]

We use it in a Summer Waves pool. You can practically use it in any kind of pool. Just need to add or replace adapter connection to a Intex connector. Here we have a video kzbin.info/www/bejne/eKm0mnd6YtSsnpI

[@anthonyimeel8814]

Can you use this in a fiberglass pool?

[@StatUpBox]

don't see why not

[@samikib82]

Do you run the pump on filter or waste?

[@jasonbayless6495]

I run it on filter. I only use waste if manually vacuuming. If you run this on waste you're going to lose too much water.

[@katiegorman333]

Thank you ..I enjoyed the comedy too. 😊

[@StatUpBox]

Glad you enjoyed it😊👍

[@revitala3063]

Great video thank you! What do you do with the blue strainer grid extension? I think if you have intex you don't need that piece.. not sure As well I have the rectangular 32ft*16ft. Do I need to measure and cut the hose like intex manual say? I don't think so and I'm afraid if I'll cut it....there is no way back... Thank you in advance ☺️

[@jasonbayless6495]

I have a 24x16 and I did not cut the hose. I did on the previous model and it was too short. It works great the way it is now.

[@debcarpenter5411]

why wont mine move around the pool?

[@Aj85234480]

Do you have it hooked to the outline? The one where water comes out when your filter pump is running.

[@aaronbass5486]

My bristles don't turn anymore. Any idea

[@StatUpBox]

have you checked if any obstructions like hair in the inner rotating parts. good luck

[@Mattyice3188]

Does this work?????

[@StatUpBox]

Still working strong

[@Mattyice3188]

@@StatUpBox mine seems to blow debris

[@StatUpBox]

Some things to look for. Is it connected to outlet? . Where water comes out from filter. Are the seals straight? Any gaps between filter and housing?

[@Mattyice3188]

@@StatUpBox yea connected to outlet. It deff worked ok. Can you explain a little more about the seals and the gaps…

[@StatUpBox]

Where the filter meets the vacuum. Should be a clear white rubber gasket that goes around the mesh filter. There could be something that's preventing the filter seal to sit flat. Or maybe any bends on the filter. Or any holes on the mesh. Because if it sits flush. Should not leak.any debris out. Do you have the little brushes connected? or all are intact?

[@sweetythompson8904]

Take my money!!😊

[@StatUpBox]

😊😊

[@felixmadera3618]

My robot won't go down. All it does once it climbs the wall is just stay up, wheels spinning but won't go down. Pool walls are clean. Pool pump is 1½ hp.

[@pokesagagaming6904]

Is the intexz300 vacuum just for Intex pools?

[@mlorenzo0]

yes, it is intelligent, if it is not intex it gets angry and stops

[@lindaricci8319]

Too funny!

[@naciofan11]

doesnt heat the water as much as id like it to but it still was worth the $13 ...

[@jasonbayless6495]

You're hilarious!

[@StatUpBox]

Thanks 👍😊😂

[@jasonbayless6495]

@@StatUpBox and informative! Bought one tonight!

[@jasonbayless6495]

The greatest thing I've purchased for my pool!!! One question, do you have a suggestion about pulling it out without debris falling out? I hope you don't mind me answering some of your other questions. You helped me, just trying to return the favor.

[@StatUpBox]

What we do. Is get it almost out of the water and flip it upside down in the water. Then we turn off pump. Then only after we take it out of the water. So we don't break the suction action.Good luck

[@kafkid]

My unit acts nothing like this. Very slow. Sending back.

[@fatthor2476]

will it work in an in-ground pool? thanks

[@StatUpBox]

with the correct fittings and connectors it should

[@ms.quanamonae]

For the sand filter what outlet do I put to make sure the pool is vacuuming?

[@scott9083]

Will this work with a solar cover on?