Рет қаралды 734
Steel building endwall track installation is easy with this Worldwide Steel endwall track installation video. If you are a DIY or a contractor wanting to know the correct way to install your endwall track, then this video is for you.
#howto #steelbuildings #barndominium
The endwall track is required before you can complete your endwall girt attachments.
This track should be installed along the entire length of the gable (endwalls) of the building, starting at the eave purlin, and should NOT extend beyond the outside edge of the sidewall girts as it will interfere with the wall panel installation.
If you do NOT have a gable extension, then the outside edge of the endwall track will line up directly with the vertical face of the gable track previously installed. If you DO have a gable extension, then the outside edge of the endwall track should align with the outside face of the endwall girts.
It is good practice to place a galvanized member vertically flat against the endwall girts as a guide.
Align the endwall track and clamp into place at your first purlin. Do the same at the ridge purlin, or at the last purlin that the track touches. Install the track to the bottom side of the roof purlins with two number 12 Tek screws.
At Worldwide Steel Buildings, we believe in putting the power of creation into your hands. Our steel building kits have been meticulously designed with the do-it-yourselfer in mind, offering a seamless assembly process that empowers you to bring your vision to life, one bolt at a time.
When you choose Worldwide Steel Buildings, you choose more than just a DIY metal building kit - you choose a promise. A promise of exceptional quality, cost-effective solutions, and a warranty that reflects our confidence in every component.
Should you ever need assistance, our dedicated building specialists are just a call away, ready to provide the support you need to transform your prefab dream into a steel reality. Give us a call at 1-800-825-0316, or visit our website at worldwidesteelbuildings.com.