Steelcase Think - How To Replace The Cylinder

[@vitamindimo]

I have the Think V1. Followed these instructions but didn't have the tool at 0:32 and couldn't get the cylinder to budge from the seat. So I used some wd40 and hammered the cylinder from the top side (where the cable connects). On the V1, you can remove the bottom seat cushion by pressing a couple plastic tabs on the underside and sliding the cushion forward, while actuating the metal crossbar in the front. That gets you to the cable and the topside of the cylinder.

[@jeffmintube]

If only it were that easy. Really struggling to get the base off. EDIT: Managed to remove the base using the technique in this video. Thank you! What helped was to go in a circle, pulling a different leg of the base with every couple whacks of the mallet.

[@huntsofficefurniture]

Great to hear Jeffrey and thank you for your suggestion to help others.

[@kbdab]

@@huntsofficefurniture trying to remove Series 1 stool/drafting but I don't have the remove tool nor that I can remove the back. Help please?

[@Rosairis18]

Were can I buy the Cylinder removal tool?

[@toml1178]

where can i buy the replacement cylinder?

[@huntsofficefurniture]

Hi Tom. Thanks for your comment. You'll need to go back to the Steelcase Dealer you purchased your chair from Originally. Alternatively, please refer to the Steelcase website for your nearest dealer.

[@PeterGMcDermott]

Where can one procure said replacement cylinder?

[@huntsofficefurniture]

Hi Peter, if your chair is currently under warranty then the best thing to do is to contact the dealer you bought the chair from, they will hopefully be able to source this for you. Alternatively, I would recommend contacting your local dealer to see if they can help: www.steelcase.com/find-us/where-to-buy/dealers/.

[@tgalidaVO]

What about removing the cable?

[@davidporter244]

where in the fuck can I get that tool?